Kenmore 25344133800, 25344133802 manual Interior Lighting, Spill Proof SLIDE-OUT Glass Shelving

Page 7

DOOR REMOVAL

If door must be removed:

,,Unplug the unit

,,Gently lay freezer on its back, on a rug or blanket.

,,Remove two base screws and base panel. Remove wire from clips on bottom of cabinet, if required.

,,Unplug connector, if required, by holding the cabinet connector in place and pulling the door connector out.

,,Remove the bottom hinge screws.

,,Remove the plastic top hinge cover.

,,Remove the screws from the top hinge.

,,Remove the top hinge from the cabinet.

,,Remove the door and bottom hinge from the cabinet.

,,To replace door, reverse the above procedures and securely tighten all screws to prevent hinge slippage.

Base

Base Panel Screws -

Hinge Screws

COOL DOWN PERIOD

For safe food storage, allow four (4) hours for freezer to cool

down completely. The freezer will run continuously for the first several hours.

ELECTRONIC TEMPERATURE CONTROL

The electronic tern )erature control is located inside the freezer. Temperature is factory preset to provide satisfactory food storage temperatures. However, the temperature control is adjustable to provide a range of temperatures for your personal satisfaction.

To adjust the temperature setting, move the UP (_) button for

warmer temperature and DOWN (0) button for colder temperature on the control panel. Allow several hours for the temperature to stabilize between adjustments.

FREEZERTEMP

7 is coUdest

0 is off

Door Connector

Cabinet Connector

iCE MAKER INSTALLATION

If your freezer has an automatic ice maker, please refer to the insert in the bond pack that came with your freezer (CONNECTING iCE MAKER TO WATER SUPPLY) to correctly hook-up your ice maker.

INTERIOR LIGHTING

The light comes on automatically when the door is opened. The light bulb assembly is located

on the back of the freezer control box. To replace the light bulb, turn the temperature control to "OFF" and unplug the

electrical cord. Replace the old bulb with a bulb of the same

type and wattage.

SPILL PROOF SLIDE-OUT GLASS SHELVING

Multi-position

adjustable slide

out

glass shelves can be moved

to any position for

larger

or

smaller

packages. The

shipping

spacers that

stabilize

the

shelves

for

shipping may be

removed

and discarded.

 

 

 

 

,

 

Image 7
Contents 44133 Freezer Read ALL iNSTRUCTiONS Before Using THiSRead and Savethese Instructions Recordyour Model and Serial NumbersLimited Five Year Warranty on Sealed Refrigeration System Other PrecautionsAN Extension Cord or AN Adapter Plug Sears Maintenance Agreement Maintenance AgreementsU.S.A Master Protection Agreements I4 Ilower Crisper I8 ITILT-OUTSHELVESTo Level Freezer InstallationSteps LevelingSpill Proof SLIDE-OUT Glass Shelving Interior LightingAiR Filter Crisperswith Adjustable DiViDERSDoor Mountedtemperature Gauge To Adjustthe ShelvesVacation and Moving Tips TiLT OUT ShelfTurning Your ICE Maker on ICE Maker TiPS Care and Cleaning ChartCausecorrection ProblemCause Correction See Door Problems Open the door less oftenFoods with strong odors are in the freezer Automatic ice maker notJarvis Sears Maintenance AgreementDear Customer Sears