Red Rose Music 5 Troubleshooting guide, Symptom No audio, tubes and front panel LED donÕt light

Page 15

Water and moisture: This product should never be used near water. To prevent fire or a shock hazard, do not expose the Model 5 to rain or moisture. The Model 5 is designed for indoor use only. Never use any liquids in and around the Model 5 that may run into the chassis or onto live circuits.

Heat: Place Model 5 should be located in a cool, dry location. Keep away from heat sources such as heat registers, stoves or other sources that produce heat. Never block the cooling vents in, around and under the Model 5Õs chassis. Never place a cover that may hold heat in and overheat the Model 5 causing damage.

Voltage ratings: This product should be connected to a power source of the proper rated voltage. The correct voltage rating for the Model 5 is located on the rear panel near the AC power connector. It should never be operated above or below the designated voltage rating.

Safety ground: Never lift or defeat the safety ground connection between the power cord and wall outlet. A shock or fire hazard is present when this safety feature is disabled.

No user serviceable parts inside. Never operate the Model 5 inverted or with the bottom inspection plate removed. A shock hazard is present when the covers removed.

Troubleshooting guide:

Symptom: No audio, tubes and front panel LED donÕt light.

Confirm that the AC power cord is firmly connected at both ends.

If the amplifier is plugged into a power strip or a power conditioner, confirm that the power switch is on.

Use a lamp or other small electrical device to confirm that there is AC power at the outlet. If the lamp does not light, check the fuse box or circuit breaker.

Remove the power cord from the amplifier, open the fuse holder, and inspect the fuse. If it has blown, replace it with the spare. If the fuse blows again, contact your dealer or Red Rose MusicÕs customer service department.

Symptom: No audio, tubes and LED light

Make sure the Power switch is not set to STBY.

Make sure the program source is turned on and producing a signal. Confirm that the cables from the source component to the amplifier are connected at both ends.

Confirm that the speaker cables are connected to the amplifier and the speakers.

Use the BIAS MONITOR switch to check the plate current of the four output tubes. If the meter shows low plate current for one or more tubes, and you are unable to use the Bias Adjust control to bring the plate current up to the correct value, replace all four output tubes.

If the meter shows no plate current for a single tube, or if the red LED in one of the output tube sockets lights, disconnect power to the amplifier and replace the fuse for that tube socket.

Image 15
Contents RED Rose Music Marklevinson@earthlink.net RED Rose Music Page Model 5 Integrated Amplifier Features SpecificationsTour of Your Model 5 Amplifier Rear Panel Page Top of Amplifier refer to next page for illustration Fuse for Output Tube Installing Your Model 5 Amplifier Page Day-to-Day Operation Replacing the Output Tubes Safety InstructionsTroubleshooting guide Symptom No audio, tubes and front panel LED donÕt lightSymptom No audio, tubes and LED light Symptom Distorted audio Mailservice.electronics@redrosemusic.com Service and Technical Support

5 specifications

Red Rose Music 5 is a groundbreaking advancement in the realm of audio technologies, revolutionizing the way we experience sound. Renowned for its rich, immersive sound quality, this state-of-the-art music system is designed for audiophiles and casual listeners alike. Its primary purpose is to provide unparalleled clarity and depth, ensuring that every note and nuance is heard as the artist intended.

One of the main features of Red Rose Music 5 is its advanced digital processing capabilities. It utilizes sophisticated algorithms to enhance sound quality, providing listeners with an authentic audio experience. These algorithms analyze incoming audio signals and optimize them in real-time, resulting in a listening experience that captures the essence of live performances.

The system also incorporates high-resolution audio formats, allowing users to enjoy music in stunning detail. Supporting formats like FLAC and DSD, Red Rose Music 5 caters to users who prioritize quality over convenience, ensuring that even the most intricate compositions are rendered beautifully. This feature is complemented by an impressive dynamic range, which allows for a stark contrast between soft and loud sounds, providing a fuller listening experience.

Another noteworthy characteristic is the connectivity options available with Red Rose Music 5. With support for Bluetooth, Wi-Fi, and various digital inputs, users can easily stream music from their smartphones, tablets, or computers. This flexibility makes it possible to enjoy an expansive library of music without the clutter of physical media.

The user interface of Red Rose Music 5 is designed for simplicity and ease of use. Featuring a responsive touch-screen display, navigating through playlists and settings is intuitive. Customization options allow users to tailor their listening experience according to personal preferences, ensuring that every session is unique.

Design-wise, Red Rose Music 5 embodies elegance. Its sleek, modern aesthetic, combined with high-quality materials, makes it a beautiful addition to any home. The system is engineered not only for performance but also for longevity, incorporating components that can withstand the rigors of regular use.

In essence, Red Rose Music 5 is a versatile and sophisticated music system that caters to the needs of modern audiophiles. With its superior sound quality, wide range of connectivity options, and user-friendly interface, it stands as a testament to technological advancement in the world of audio, delivering an extraordinary listening experience.