Maintenance Tasks, To remove the top spray arm

MAINTENANCE TASKS

Certain areas of your dishwasher require occasional maintenance. The maintenance tasks are easy to do and will ensure continued superior performance from your dishwasher:

. Wiping up Spills and Splash-outs

Water may occasionally splash out of your dishwasher, especially if you interrupt a cycle or open the dishwasher door during a cycle. To avoid floor damage and possible mold growth, do not allow wet areas to remain around or under the dishwasher.

. Clean the Stainless Steel Inner Door and Tub

Clean the outer edges of the inside door panel regularly to remove debris that might collect from normal loading.

If spots begin to appear on the stainless steel tub or inner door, make sure the rinse agent reservoir is full.

. Check and clean the Spray arm nozzles

Occasionally check the spray arms to ensure that the spray arm nozzles (holes) are unobstructed. You must remove the spray arms to check them for obstruction.

To remove the top spray arm:

1.Remove the empty top rack from the dishwasher.

2.Turn the rack upside down. The top spray arm is held in position by a locking nut as shown above. Turn the locking nut counter-clockwise and remove it as shown above to release the spray arm.

3.Remove the spray arm as shown above.

4.Look for obstruction in the spray nozzles.

5.If the spray nozzles need cleaning, flush them under running water.

To reinstall the top spray arm:

1.Return the top spray arm to its installed position.

2.Return the locking nut to its installed position and turn it 1/8 turn clockwise.

3.Return the top rack to the top rack roller guides.

your fingers. The large obiect trap could contain sharp ects.

To remove the bottom spray arm:

1.Remove the empty bottom rack from the dishwasher tub.

2.Grasp and lift the bottom spray arm as shown below.

3.Look for obstruction in the spray nozzles.

4.If the spray nozzles need cleaning, flush them under running water.

To reinstall the bottom spray arm:

1.Return the bottom spray arm to its installed position and press it so that it snaps into place.

2.Return the bottom rack to its installed position.

*Check and clean the filter system

This dishwasher has a filter system that consists of a Large

Obiect Trap/Cylinder Filter assembly and a Fine Filter.

The filter system is located on the inside of your dishwasher under the lower rack and is easily accessible. During normal use, the filter system is self-cleaning.You should occasionally inspect it for foreign obiects and clean it when necessary.

630.7793 specifications

The Kenmore 630.7793 is a highly regarded model in the realm of home appliances, specifically designed to meet the needs of modern households. This refrigerator stands out not just for its sleek design but also for its innovative features and advanced technologies that contribute to optimal food preservation and energy efficiency.

One of the most notable characteristics of the Kenmore 630.7793 is its spacious interior, which is designed to accommodate the varying needs of families. With multiple shelves, adjustable door bins, and dedicated compartments for fruits and vegetables, organization is made easy. The crisper drawers maintain ideal humidity levels, ensuring that produce stays fresh for longer.

In terms of technology, the Kenmore 630.7793 is equipped with SmartSense temperature management, which monitors and adjusts the internal climate to maintain an even temperature throughout the refrigerator. This advanced system helps minimize temperature fluctuations, significantly extending the freshness of stored food.

Another highlight of the Kenmore 630.7793 is its energy efficiency. Rated with Energy Star certification, it utilizes less energy compared to traditional models, which translates to lower electricity bills and a reduced carbon footprint. Consumers are increasingly drawn to energy-efficient appliances, and this model delivers on that expectation.

The design of the Kenmore 630.7793 is both functional and aesthetically pleasing. Its stainless steel finish provides a modern touch that fits seamlessly into a variety of kitchen decors. Additionally, the LED lighting enhances visibility while also consuming less energy than traditional bulbs, illuminating every corner of the refrigerator.

One of the user-friendly features of this refrigerator is its ice and water dispenser, conveniently located on the front door. This feature allows for easy access to ice and chilled water without having to open the main compartment. The filter system ensures that the water is purified, delivering fresh-tasting hydration at any time.

In summary, the Kenmore 630.7793 is an impressive blend of functionality, energy efficiency, and modern aesthetics. Its array of features—such as SmartSense technology, spacious design, and convenient ice/water dispensers—makes it a top choice for families seeking to enhance their kitchen experience. Whether for fresh produce, chilled beverages, or optimal food storage, this model meets a broad range of household needs.