Kenmore 15801, 16808, 17801, 16805, 17805, 15850, 15808 Options, Water Heat, No Heat DRY, Delay Hours

Options

O	O			O		m	O	D	I
RINSE	WASHING		WATF..RHEATING			RINS_KI		GLEAN	LOCKON
								6
1Ira	O	O	O	_	ID	ID	lID	a
							HOURS
POTS	NORMAL	WATER	CHINA
PANS	WASH	MISER	WASH

CYCLES

J

Option

WATER HEAT

•Automatic with Pots Pans

•Option for Normal Wash and

Water Miser cycles

•Not available for China Wash or Quick Rinse cycles

NO HEAT DRY

•Option for Pots Pans, Normal Wash, Water Miser and China

Wash cycles

When should I use It?

To ensure water temperature in main wash reaches 140°F (60°C).

Use when you do not need a rapid dry cycle. Allow longer drying times (overnight). Use rinse agent to improve drying.

What does it do?

•When you select Water Heat, main wash delays until water heats to 140°F (60°C).

•As water heats, washing action continues. The Water Heating status indicator glows until water reaches proper temperature.

I • Turns off heating element in 30-minute dry period.

DELAY HOURS

•Option for any cycle

Use when you want to start a cycle later.

Set delay to run dishwasher during times when off-peak

utility rates are in effect, Local utilities recommend this to avoid

heavy usage of energy at certain times of day.

•Delay beginning of your selected cycle and options for up to 6 hours.

•To set:

1.Close the door firmly until you hear it latch.

2.Select the desired cycle and options.

3.Press Delay Hours once for a 2 hour delay, twice for 4 hours, and 3 times for 6 hours.

The appropriate status indicator will glow.

•Press Delay Hours a fourth time to cancel the option.

•If you wish to put more dishes in the dishwasher while it is in delay mode, be sure to latch the door after you add them.

•The amount of delay can be changed or canceled at any time before the cycle begins.

14