Kenmore 241815202 manual To Remove Freezer Handle, To Attach Freezer Handle, To Attach Trim

Page 8

DOOR REMOVAL / REVERSAL INSTRUCTIONS

NOTE

Some models have “pocket” handles, which are recessed into the sides of the door. On those models, only the hinges will need to be reversed. Other models will have the handles shown on the next three pages.

TO REMOVE FREEZER HANDLE:

(Handles may be easier to reverse while doors are off.)

1.Remove two screws attaching handle to bottom of freezer door.

2.Swing bottom of handle away from the door and slide handle straight up and off of dovetail button.

3.Remove screw and dovetail button and install on other side, moving hole plugs from corresponding holes to opposite side.

TO ATTACH FREEZER HANDLE:

1.Start with handle offset away from door. Place top of handle over dovetail button, swing handle into an upright position and pull downward, locking it into place.

2.Secure bottom of handle with two screws removed earlier.

TO REMOVE REFRIGERATOR HANDLE:

(Handles may be easier to reverse while doors are off.)

1.Remove two screws attaching handle to top of refrigerator door.

2.Swing top of handle away from door and slide handle down and off of dovetail button.

3.Remove screw and dovetail button and install on other side, moving hole plugs from corresponding holes to opposite side.

TO ATTACH REFRIGERATOR HANDLE:

1.Start with handle offset away from door. Place bottom of handle over dovetail button, swing handle into an upright position and pull upward, locking it into place.

2.Secure top of handle with screws.

TO ATTACH TRIM:

1.Slide both trim locks out of trim.

2.Insert new adhesive trim locks contained in your literature pack.

NOTE

Trim lock must be removed and installed by sliding over the two donut shaped areas.

3.Install trim to handle by sliding over base of handle. Carefully align trim and press down at trim lock locations.

4.Replace hole plug on opposite side. Use rubbing alcohol to remove any adhesive residue from old trim lock locations.

ENGLISH

TRIM REMOVAL (FULL-LENGTH TRIM MODELS ONLY)

In some models, the refrigerator door has a full length trim piece which continues from the bottom of the handle to the bottom of the door.The top of the trim fits around the base of the handle. An adhesive “trim lock” is positioned about halfway down. The bottom of the trim is held in place by either an adhesive trim lock, or a trim lock with two prongs inserted into a hole on the face of the door.

TO REMOVE TRIM:

1.Remove trim by gently pulling trim lock areas out and away from door.

2.When trim is free from door, slide the trim straight down and away from base of handle.

NOTE

For models with short handle trim, remove by sliding trim straight down and off of handle bracket.

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Refrigerator Welcome & Congratulations Important Safety Instructions EnglishWarranty Information OneYear LimitedWarrantyElectrical Information Do not use an extension cord or adapter plugMaster Protection Agreements Master Protection AgreementsInstallation InstallationLocation Door OpeningTo Connect Water Supply Line To Ice Maker Inlet Valve Connecting Household Water Supply to RefrigeratorBefore Installing The Water Supply Line,You Will Need Door Removal / Reversal Instructions Door Removal and Reversal InstructionsTo Remove Freezer Handle To Attach Freezer HandleTo Remove Refrigerator Handle To Attach Refrigerator HandleTo Attach Refrigerator Handle To Attach Freezer Handle To Reverse REFRIGERATOR/FREEZER HandlesEnglish Features AT a Glance Freezer LightSpecial Item Rack Fixed Door BinTemperature Controls Temperature AdjustmentTemperature Adjustment Guide Cool Down PeriodLooking Inside EnglishFreezertilt OUT Doorrack Crispers Some Models Humidity Control Some ModelsDeli Drawer Some Models Special Item Rack Some ModelsFood Storage & Energy Saving Ideas ICE Service Turningyour ICE Maker onTurningyour ICE Maker OFF ICE Productionwhatto ExpectNormal Operating Sounds & Sights Care & Cleaning Care & Cleaning ChartNever Clean Condenser Some Models Replacing the Freezer Light Bulb Some ModelsBefore YOU Call CommonGet it fixed, at your home or ours

241815202 specifications

The Kenmore 241815202 is an innovative refrigerator water filter designed to ensure that you always have clean and fresh-tasting water and ice. This product stands out not only for its effectiveness but also for its ease of installation and outstanding compatibility with several Kenmore refrigerator models.

One of the main features of the Kenmore 241815202 is its advanced filtration technology. It utilizes activated carbon and a multi-stage filtration process to reduce impurities and contaminants commonly found in tap water. This advanced system effectively removes chlorine taste and odor, heavy metals such as lead and mercury, and other harmful substances, providing you with safe and refreshing water. The result is a noticeable improvement in the quality of water and ice produced by your refrigerator.

Another significant characteristic of the Kenmore 241815202 is its user-friendly design. The filter is designed for easy installation and replacement, eliminating the need for complex tools or professional help. This makes maintenance a hassle-free process, allowing you to replace the filter every six months or as needed to ensure optimal filtration and water quality.

In addition to its filtration efficiency, the Kenmore 241815202 is made with high-quality materials that are NSF certified. This certification guarantees that the filter meets strict safety and quality standards, making it a reliable choice for consumers who prioritize health and safety in their drinking water. The filter's longevity and performance are also commendable, as it can handle a substantial volume of water before needing replacement, making it economically advantageous.

The Kenmore 241815202 is compatible with a variety of Kenmore refrigerator models, which increases its appeal to consumers. This compatibility ensures that a broad range of users can take advantage of its filtering capabilities. Moreover, the filter's sleek design allows it to fit seamlessly into the refrigerator’s existing filter compartment, maintaining the appliance's aesthetic value.

In conclusion, the Kenmore 241815202 is a must-have for those looking to enhance their refrigerator's water and ice quality. With its advanced filtration technology, easy installation, and compatibility with various refrigerator models, it proves to be a practical and effective solution for families prioritizing health and convenience in their daily lives.
Top Page Image Contents