Kenmore 25360721005 manual Before Installing The Water Supply Line,You Will Need

Page 7

Installation - Connecting Ice Maker To Water Supply

To avoid electric shock, which can cause death or severe personal injury, disconnect the refrigerator from electrical power before connecting a water supply line to the refrigerator.

To Avoid Property Damage:

•Copper tubing is recommended for the water supply line.Water supply tubing made of ¼” plastic is not recommended since it greatly increases the potential for water leaks. Manufacturer will not be responsible for any damage if plastic tubing is used for supply line.

•DO NOT install water supply tubing in areas where temperatures fall below freezing.

•Chemicals from a malfunctioning softener can damage the ice maker. If the ice maker is connected to soft water, ensure that the softener is maintained and working properly.

IMPORTANT: Ensure that your water supply line connections comply with all local plumbing codes.

Before Installing The Water Supply Line,You Will Need

•Basic Tools: adjustable wrench, flat-blade screwdriver, and PhillipsTM screwdriver

•Access to a household cold water line with water pressure between 20 and 100 psi.

•A water supply line made of ¼ inch (6.4 mm) OD, copper tubing. To determine the length of copper tubing needed, you will need to measure the distance from the ice maker inlet valve at the back of the refrigerator to your cold water pipe. Then add approximately 7 feet (2.1 meters), so the refrigerator can be moved out for cleaning (as shown).

•A shutoff valve to connect the water supply line to your household water system. DO NOT use a self-piercing type shutoff valve.

•A compression nut and ferrule (sleeve) for connecting the water supply line to the ice maker inlet valve.

NOTE: A water line kit is available from your appliance dealer at additional cost. It contains 25 feet (7.6 meters) of ¼ inch OD copper tubing, a saddle type shutoff valve (nonpiercing), (2) ¼ inch brass compression nuts, (2) ferrules/ sleeves, and instructions for installing a water supply line.

To Connect Water Supply Line To Ice Maker Inlet Valve

1. Disconnect refrigerator from electric power source.

2. Place end of water supply line into sink or bucket. Turn ON water supply and flush supply line until water is clear. Turn OFF water supply at shut off valve.

3. Unscrew plastic cap from water valve inlet and discard cap.

4. Slide brass compression nut, then ferrule (sleeve) onto water supply line, as shown.

5. Push water supply line into water valve inlet as far as it will go (¼ inch). Slide ferrule (sleeve) into valve inlet and finger tighten compression nut onto valve. Tighten another half turn with a wrench; DO NOT over tighten.

6. With steel clamp and screw, secure water supply line to rear panel of refrigerator as shown.

7.Coil excess water supply line (about 2½ turns) behind refrigerator as shown and arrange coils so they do not vibrate or wear against any other surface.

8. Turn ON water supply at shutoff valve and tighten any connections that leak.

9. Reconnect refrigerator to electrical power source.

10. To turn ice maker on, lower wire signal arm (see ice maker front cover for ON/OFF position of arm).

IMPORTANT: It takes approximately 24 hours for the ice maker to begin producing ice. Air in new plumbing lines may cause ice maker to cycle two or three times before making a full tray of ice. New plumbing may cause ice to be discolored or have poor flavor. Discard ice made during the first 24 hours.

ENGLISH

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Side by Side Refrigerator Table of Contents Welcome Important Safety Congratulations InstructionsElectrical Information Important Safety Warranty Information InstructionsFull ONE-YEAR Warranty on Refrigerator Full FIVE-YEAR Warranty on Sealed Refrigeration SystemCanada Limited Warranty Sears Maintenance Agreement Maintenance AgreementsMaster Protection Agreements Installation To Connect Water Supply Line To Ice Maker Inlet Valve Before Installing The Water Supply Line,You Will NeedTo Remove Freezer Door Door Removal InstructionsDoor Removal Instructions To Remove Refrigerator DoorProofTM Features At a GlanceTemperature Controls Turning the Cooling System on and OFF SYSTEM-MONITORING AlarmsResponding to Alarms Audible Tones & Indicator Lights Using the Alarm Reset ButtonICE Cream Shelf Some Models Cantilever Shelf AdjustmentTo adjust cantilever shelves Looking InsideSpecial Item Rack Some Models Adjustable Door BinsDoor Storage Tall Bottle Retainer Some ModelsHumidity Control Some Models Looking Inside Special Storage AreasPolar Automatic Ice and Water DispenserICE Dispenser Tips ICE and Water Dispenser FeaturesHow the Water Dispenser Works How the Ice Dispenser WorksRemove and empty the ice storage bin if Cleaning the ICE DispenserTo change filter Changing the FilterTo change filter Changing the FilterTighten Past Stop Food Storage Ideas Food Storage & Energy Saving IdeasEnergy Saving Ideas Normal Operating Sounds & Sights Care & Cleaning Replacing Light Bulbs Before You Call Problem Cause CorrectionTemperatures are TOO Warm ICE Dispenser Water Dispenser Problem Cause Correction

25360721005 specifications

The Kenmore 25360721005 is a standout refrigerator that combines style, functionality, and advanced technology to meet the needs of modern households. Known for its sleek design and innovative features, this appliance is ideal for users looking to enhance their kitchen experience.

One of the main highlights of the Kenmore 25360721005 is its spacious interior. With a generous total capacity, it provides ample room for food storage, ensuring that groceries are easily organized. The refrigerator features adjustable shelves that can be repositioned to accommodate larger items, such as party platters or bulky containers. This flexibility allows users to customize the layout according to their specific storage needs.

In terms of technology, the Kenmore 25360721005 is equipped with a state-of-the-art cooling system. Its multi-air flow ventilation ensures even temperature distribution, keeping food fresher for longer periods. The intelligent design minimizes temperature fluctuations, so whether it's fresh produce or dairy products, everything remains well-preserved.

Another impressive characteristic is its energy efficiency. The Kenmore 25360721005 is designed to consume less energy, helping to reduce electricity bills while also being environmentally friendly. It often receives energy star ratings, making it a responsible choice for eco-conscious consumers.

The appliance also features a user-friendly digital control panel which allows for precise temperature settings. This means that users can easily adjust temperatures for different compartments based on their needs. In addition, some models come with a water and ice dispenser, providing convenient access to chilled water and ice without having to open the refrigerator door.

The Kenmore 25360721005 also emphasizes both safety and convenience. Many models feature door alarms that alert users if the door has been left ajar, preventing food spoilage and energy waste. Additionally, the easy-to-clean surfaces make maintenance a breeze, ensuring the refrigerator remains looking new for years to come.

Overall, the Kenmore 25360721005 combines practicality with modern technology, making it a reliable choice for any kitchen. Its blend of smart features caters to a busy lifestyle, ensuring that food remains fresh while adding elegance to the home.
Top Page Image Contents