Kenmore 795.7130 manual Unpacking Your Refrigerator, Next, INSTALLATiON, Base Grille iNSTALLATiON

Page 8

EXCESSIVE WEIGHT HAZARD

Use two or more people to move and install refrigerator. Failure to do so can result in back or other injury.

UNPACKING YOUR REFRIGERATOR

Remove tape and any temporary labels from your refrigerator before using. Do not remove any warning type labels, the model and serial number label, or the techsheet (on some models), that is attached to back wall of the refrigerator.

To remove any remaining tape or glue, rub the area briskly with your thumb. Tape or glue residue can also be easily removed by rubbing a small amount of liquid dish soap over

the adhesive with your fingers. Wipe with warm water and dry. Do not use sharp instruments, rubbing alcohol, flammable fluids

or abrasive cleaners to remove tape or glue. These products

can damage the surface of your refrigerator. For more information, see the Important Safety Instructions section,

Refrigerator shelves are installed in the shipping position.

-_1 P-

-_1

(5.08 cm) 2"

(5.08 cm) 2"

[] CAUTION: Avoid placing the unit near heat sources, direct

sunlight or moisture.

NOTE: For proper air circulation, best cooling and energy consumption results, maintain a minimun distance of 2 inches (5.08 cm) form adjacent items and surfaces.

Please reinstall shelves according to your individual storage needs.

When Moving Your Refrigerator:

Your refrigerator is heavy. When moving the refrigerator for cleaning or service, be sure to protect the floor. Always pull the refrigerator straight out when moving it. Do not wiggle or walk the refrigerator when trying to move it, as floor damage could occur.

NEXT

1.Clean your refrigerator thoroughly and wipe off: all dust accumulated during shipping.

2.Install accessories such as ice cube bin, drawers, shelves, etc., in their proper places. They are packed together to prevent possible damage during shipment.

3.Let your refrigerator run for 2 or 3 hours before store food in it. Check the flow of cold air in the freezer compartment to ensure proper cooling. Your refrigerator is now ready for use.

Be careful when you work with hinge, base grille, stopper etc. You may be injured.

Do not put hands or metal sticks into air vents, base grille or bottom of refrigerator. You may be injured or receive an electrical shock.

EXPLOSION HAZARD

Keep flammable materials and vapors, such as gasoline, away from refrigerator.

Failure to do so can result in death, explosion or fire.

iNSTALLATiON

1.To avoid vibration, the unit must be level. If it is required, adjust the leveling screws to compensate for unevenness of the floor. The front should be slightly higher than the rear to aid in door closing. Leveling screws can be turned easily by tipping the cabinet slightly. Turn the leveling screws clockwise

( =t._ ) to raise the unit, counterclockwise ( _,m, ) to lower it.

2.Install this appliance in an area where the temperature is between 55°F (13°C) and 110°F (43°C.) If the temperature around the appliance is too low or high, cooling ability may be adversely affected.

3.Keep the refrigerator at a proper distance from adjacent items and surfaces. Too small a distance may result in lowered freezing capability and increased electricity charge consumption.

BASE GRILLE iNSTALLATiON

To install or repUace base grllUe:

1.Remove the 2 screws from the bottom front part of refrigerator.

2.Place the base grille into position and insert and tighten screws.

To remove the base grille

1.Remove screws from the base grille and remove it.

2.Reattach screws to the base of refrigerator.

9

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Ienmoreo Warranty Protection Agreements Grounding Requirements Parts and FeaturesCare Cleaning Connecting Water Line Troubleshooting GuideKenmore Appliance Warranty One Year Limited Warranty Bottom Freezer RefrigeratorSears Installation Servlce Master Protection AgreementsProtection Some limitations and exclusions applyPage Before YOU Throw Away Your OLD Refrigerator or Freezer Important Please read carefullyTo Connect Electricity Electrical Shock Hazard Recommended Grounding MethodOptibin Crispers INSTALLATiON Base Grille iNSTALLATiONUnpacking Your Refrigerator NextHOW to Remove Door Handle Tools YOU MAY NeedRight Door Howto Remove Refrigerator DoorLeft Door HOW to Remove Refrigerator Door Replaclng Refrigerator DoorSeparate the left and right rail cover HOW to Remove and iNSTALL the Pull OUT DrawerRemoving Pull out Drawer Right Rail cover HOW to Remove and iNSTALL the Pull OUTDrawer Leveling Leveling and Door AlignmentDoor Alignment Door Alarm Setting the ControlsEnsuring Proper AiR CiRCULATiON MULTI-FLOWFood Storage Guide AdjustmentAdjusting Control Settings Vegetables with skins carrots, peppers FishLeftovers Suffocation HazardRefrigerator Section Refrigeratorshelves Crisper Humidity Control GlassOn some ColdCrisper Cover with Lattice on Inner Surface To replace lattice on inner surfaceModular Door To remove Crisper coverDairy BiN DurabaseTo remove Lift Pull straight outClimb Inside Glide -OUTDRAWER BasketDurabase DiViDER on some models General Cleaning Tips Plastic Parts covers and panelsOutside Door Liners and GasketsPower iNTERRUPTiONS When YOU GO on VacationWhen YOU Move When YOU should SET the Icemaker Power Switch to O OFFIcemaker Normal Sounds YOU MAY HearStraight= and Phifflpsblade screwdriver Before YOU BeginWhat YOU will Need Fasten the Shut OFF Valve Shut OFF the Main Water SupplyDrill the Hole for the Valve Connect the Tubing to the Refrigerator Turn the Water on AT the Shut OFF ValveFlush OUT the Tubing Flushed through the tubingAte the same time for 5 seconds Understanding Sounds YOU MAY HearNot cooling Order to OFFLights do not Installation Icemaker installationWater Defrosf drain Pan Refrlgerafor Make too much noiseIs not Off damp

795.7130 specifications

The Kenmore 795.7130 refrigerator is a versatile and innovative appliance designed to meet the needs of modern households. With its sleek design and a host of advanced features, this refrigerator not only stands out in aesthetics but also in functionality.

One of the standout characteristics of the Kenmore 795.7130 is its spacious interior. With a generous capacity, it is ideal for families or anyone who needs to store a significant amount of food and beverages. The refrigerator section usually includes adjustable shelves, which allow for flexible storage options. The shelves are often designed to accommodate tall bottles and large containers, making organization a breeze.

The model also features advanced cooling technologies aimed at preserving freshness. The dual evaporator system is a key component, ensuring that the refrigerator and freezer maintain optimal humidity levels. This not only keeps food fresh for longer but also prevents the transfer of odors between the two compartments. Additionally, the refrigerator typically includes a linear compressor that enhances energy efficiency and reduces noise, providing a quieter kitchen environment.

For ice and water enthusiasts, the Kenmore 795.7130 often comes equipped with an in-door ice maker and a water dispenser, making it easy to access chilled water and ice cubes. The water filtration system ensures that the water is clean and free from impurities, providing peace of mind for health-conscious users.

Another notable feature is the temperature management system. Many models include adjustable temperature controls and quick cool settings, which allow users to rapidly cool food items when needed. The built-in digital display makes it easy to monitor and adjust settings without hassle.

The Kenmore 795.7130 also emphasizes energy efficiency, often meeting or exceeding ENERGY STAR certification. This not only helps reduce energy bills but also contributes to a more sustainable household.

In terms of design, this refrigerator typically showcases a modern stainless-steel finish that complements a variety of kitchen styles. The sleek, fingerprint-resistant surface also ensures that the appliance maintains a clean appearance over time.

In conclusion, the Kenmore 795.7130 is a solid choice for anyone seeking a reliable refrigerator that combines style and functionality. With its spacious interior, advanced cooling technologies, and energy-efficient design, it is well-suited to accommodate the demands of everyday life.
Top Page Image Contents