INSTALLATiON iNSTRUCTiONS

Instatl the shutoff valve on the nearest frequently used drinking water line.

1. SHUT OFF THE MAIN WATER SUPPLY

Turn on the nearest faucet to relieve the pressure on the line.

2.CHOOSE THE VALVE LOCATION

Choose a location for the valve that is

easily accessible,		it is best		to	connect
into the side of a vertical water pipe.
When it is necessary to connect into						m
a horizontai	water	pipe, make			the
connection	to the top or side, rather
than at the	bottom, to		avoid		drawing
off any sediment		from	the	water pipe.

3. DRILL THE HOLE FOR THE VALVE

Drill a I/4 in. hole in the water pipe using a sharp bit. Remove any burrs resulting from

drilling the hole in the pipe. Be careful not to allow water to drain into the drill. Failure to drill a 1/4 in. hole may result

in reduced ice production or smaller cubes.

NOTE: The hookup line cannot be white, plastic tubing. Licensed plumbers must use only copper tubing NDA tubing :#49595 or 49599 or Cross Link Polyethylene (PEX) tubing.

4.FASTEN THE SHUTOFF VALVE

Fasten the shutoff valve to the cold water pipe with the pipe clamp.

Pipe Clamp-

Saddle-Ty_	Vertical	Cold
Shutoff Valve	Water	Pipe

NOTE: Commonwealth of Massachusetts Plumbing Codes 248CMR shall be adhered to. Saddle valves are illegat and use is not permitted in Massachusetts. Consult with your licensed plumber.

5. TIGHTEN THE PiPE CLAMP

Tighten the clamp screws until the sealing washer begins to swell.

NOTE: Do not overfighten damp or you may crush the tubing.

Washer

,--------inlet End

Pipe Clamp

Clamp Screw_

o ROUTE THE TUBING

Route the tubing between the cold water line and the refrigerator.

Route the tubing through a hole drilled in the wall or floor (behind the refrigerator or adjacent base cabinet) as close to the wall as possible.

NOTE: Be sure there is sufficient extra tubing (about

8 feet coiled into 3 turns of about 10 in. diameter) to allow the refrigerator to move out from the wall after installation.

7.CONNECT THE TUBING TO THE VALVE

Place the compression nut and ferrule (sleeve) for copper tubing onto the end of the tubing and connect it to the shutoff valve. Make sure the tubing is fully inserted into the valve. Tighten the compression nut securely.

Saddle-Type
Shutoff	Valve	_	, b
	X		, b
Packing Nu_			ression Nut
			ression Nut
Outlet	Valve--		Ferrule (sleeve)

NOTE: Commonwealth of Massachusetts Plumbing Codes 248CMR shall be adhered to. Saddle valves are

illegal and their use is not permitted in Massachusetts. Consult with your licensed plumber.

795.7103 specifications

The Kenmore 795.7103 is a top-of-the-line French door refrigerator that exemplifies modern design and functionality, catering to the needs of contemporary households. With an elegant stainless-steel finish, the refrigerator not only enhances the aesthetics of your kitchen but also provides durability and easy maintenance.

One of the standout features of the 795.7103 is its spacious interior, offering over 27 cubic feet of storage capacity. The thoughtful layout includes adjustable shelves, crisper drawers, and door bins that maximize organization. The crispers are specifically designed to maintain optimal humidity levels, ensuring that fruits and vegetables remain fresh and flavorful for longer periods.

Equipped with advanced cooling technologies, the Kenmore 795.7103 utilizes a multi-air flow system that circulates cold air evenly throughout the refrigerator. This feature helps eliminate hot spots and ensures that every shelf maintains the desired temperature, preserving your food with precision. In addition, the refrigerator boasts a SmartSense temperature management system which continually monitors the internal environment, automatically adjusting to keep your perishables at their best.

The Kenmore 795.7103 also incorporates cutting-edge energy-saving technologies. It is Energy Star certified, meaning it meets strict efficiency guidelines set by the U.S. Environmental Protection Agency. This certification not only reduces energy costs but also contributes to environmental sustainability, making it a smart choice for eco-conscious consumers.

For added convenience, the refrigerator comes equipped with a water and ice dispenser located on the exterior. This offers quick access to chilled, filtered water and crystal-clear ice without the need to open the fridge. The dispenser is also designed to accommodate tall pitchers and containers, making it user-friendly.

Another noteworthy characteristic of the 795.7103 is its smart connectivity features. When paired with a compatible smart device, you can monitor and control your refrigerator's settings remotely. This connectivity allows you to receive alerts when doors are left open or if there's a temperature fluctuation, ensuring peace of mind.

Overall, the Kenmore 795.7103 embodies a blend of style, efficiency, and technology, making it an exceptional choice for anyone looking to upgrade their kitchen appliance. Whether it's the spacious interior, advanced cooling systems, or convenient features, this refrigerator stands out as a reliable and stylish addition to any home.