Setup Guide, Use with PS Audio Power Plants

Setup Guide

1.Place the Power Director 3.5 in a rack or on a shelf in an Audio/Video system. The Power Director 3.5 produces no heat, so placement of the Director is a simple matter of preference. It is safe to stack equipment up to a total of 20 pounds on top of the Director.

2.Plug in the equipment to be powered by the Director. There are three electrically isolated zones on the Power Director 3.5. Suggestions have been made on the rear panel as to how the equipment might be grouped together, but since each zone is identical (except for the number of outlets) components can be placed in the most convenient combination.

For optimum performance, it is recommend that analog equipment (stereo preamps, tuner, tape deck, etc.) be grouped separately from digital equipment (AV preamps, CD/DVD players, D to A converters, etc.). Items with high power consumption (power amps, A/V receivers, pro- jection T.V.’s etc.) should each use a separate zone if possible.

3.Set the power mode for each of the three zones with the rear panel switches. On the far left side of the rear panel of the Power Director 3.5, there are three separate slide switches. Each switch represents one of the Director’s three zones and each switch has three-posi- tions. The available settings are:

•Always On [ON] - With the switch in the ON position, the zone will receive power as soon as the Power Director 3.5 is plugged into a power source. Power will continue to pass through this zone even if the Director is switched off (standby mode).

•Switched [SW] - In the SW position, the zone will receive power as soon as the Power Director is switched on (operate mode). No power will pass to this zone when the Director is in standby mode.

•Delayed [DL] - In the DL position, the zone will activate three seconds after the Power Director is in operate mode. No power will pass to this zone when the Director is in standby mode.

4.Use the coaxial pass through to protect and provide surge/spike protection to any CATV, Satellite, or external antenna lines. There is one coaxial pass through on the rear panel of the Power Director 3.5. The pass through will deliver the full bandwidth of HDTV signals.

5.Plug the Power Director 3.5 into a power source. Use the supplied AC power cable, or an aftermarket power cable. For optimum results we recommend the use of a PS Audio xStream Power cable.

7.Turn on the Power Director 3.5 by pressing the power button located on the left side of the front panel.

The three zones of Power Director 3.5 will come on according to the settings of the rear panel slide switches.

Note: surge protection will be provided at all times for all connected equipment regardless of power mode setting.

Use with PS Audio Power Plants

The Power Director 3.5 can be used in conjunc- tion with any of the PS Audio Power Plants or other PS Audio power devices. The Power Plant can either be used at the output of one of the zones or to provide power to the Power Director

3.5.This can be helpful in large systems in order to extend the number of outlets and isola- tion benefits to more components.

When used at the output of the Power Director the Power Plant will provide isolation and additional cleansing to any product powered by it. This will also allow the Power Plant to be switched on with the Director.

When plugging the Power Director into the output of a Power Plant ensure that the rated capacity of the power plant is adequate to sup- ply all of the components powered by the Power Director.

PD 3.5 specifications

The PS Audio PD 3.5 is a significant advancement in the realm of digital audio players, known for its exceptional sonic performance, premium build quality, and user-friendly features. This state-of-the-art device is designed for audiophiles and casual listeners alike, offering an impressive array of functionalities that elevate the listening experience.

One of the most notable features of the PD 3.5 is its advanced DAC (Digital-to-Analog Converter) technology. Utilizing a high-performance DAC chip, the unit is capable of rendering audio with incredible detail and accuracy. With support for high-resolution audio formats, including DSD and PCM up to 24-bit/192 kHz, listeners can enjoy their favorite tracks in pristine quality.

The PD 3.5 is equipped with an intuitive user interface, allowing for seamless navigation through music libraries and playlists. Its touchscreen display provides easy access to all functions, and users can customize settings to accommodate their preferences. The device is compatible with various streaming services, enhancing its versatility and allowing users to enjoy a vast array of music from around the world.

Connectivity is a strong suit for the PD 3.5, featuring multiple input and output options. With USB, coaxial, optical, and balanced XLR inputs, the device ensures compatibility with a wide range of source components. Additionally, it offers balanced and unbalanced outputs for optimal connection to amplifiers and speakers, catering to both home audio setups and professional environments.

Another standout characteristic of the PD 3.5 is its built-in Wi-Fi and Ethernet capabilities. This allows for easy integration into home networks, enabling high-quality streaming without the need for cumbersome cables. The device supports popular multi-room audio technologies, making it a fantastic choice for those looking to create a sophisticated audio setup throughout their home.

In terms of construction, the PD 3.5 boasts a robust and elegant design. The premium materials used in its construction not only enhance its visual appeal but also contribute to its durability, ensuring long-lasting performance.

Overall, the PS Audio PD 3.5 offers a comprehensive suite of features, backed by advanced technologies that deliver superior audio quality. Whether for casual listening or critical audiophile assessment, the PD 3.5 stands out as a top choice for anyone seeking a high-fidelity digital audio player.