Weed Eater XT260, 530163906 Replace Spark Plug, Line Replacement, Carburetor Adjustment

Page 8

REPLACE SPARK PLUG

Replace the spark plug each year to ensure the engine starts easier and runs better. Set spark plug gap at 0.025 inch (0.6 mm). Igni- tion timing is fixed and nonadjustable.

1.Twist, then pull off spark plug boot.

2.Remove spark plug from cylinder and dis- card.

3.Replace with Champion RCJ-6Y spark plug and tighten securely with a 3/4 inch (19 mm) socket wrench.

4.Reinstall the spark plug boot.

LINE REPLACEMENT

1.Remove spool by firmly pulling on tap button.

2.Clean entire surface of hub and spool.

3.Replace with a pre-wound spool, or cut two lengths of 12-1/2 feet of 0.080! (2 mm) di- ameter Weed Eaterr brand line.

WARNING: Never use wire, rope, string, etc., which can break off and become a dangerous missile.

4.Insert ends of the lines about 1/2 inch (1 cm) into the small holes on the inside of spool.

Spool

Small

Holes

Line exit holes

 

 

Line in Notch

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Line in Notch

Hub

5.Wind the line evenly and tightly onto the spool. Wind in the direction of the arrows found on the spool.

6.Push the lines into the notches, leaving 3 to 5 inches (7 -- 12 cm) unwound.

7.Insert the lines into the the exit holes in the hub as shown in the illustration.

8.Align the notches with the line exit holes.

9.Push spool into hub until it snaps into place.

10.Pull the lines extending outside of the hub to release the lines from the notches.

CARBURETOR ADJUSTMENT

WARNING: Keep others away when making idle speed adjustments. The trimmer head will be spinning during this procedure. Wear your protective equipment and observe all safety precautions.

The carburetor has been carefully set at the factory. Adjustments may be necessary if you notice any of the following conditions:

S Engine will not idle when the throttle is re- leased.

Make adjustments with the unit supported so the cutting attachment is off the ground and will not make contact with any object. Hold the unit by hand while runningand making ad- justments. Keep all parts of your body away from the cutting attachment and muffler.

Idle Speed Adjustment

Allow engine to idle. Adjust speed until engine runs without stalling (idle speed too slow).

S Turn idle speed screw clockwise to in- crease engine speedif engine stalls or dies.

STurn idle speed screw counterclockwise to decrease engine speed.

Idle Speed Screw

Air Filter Cover

If you require further assistance or are unsure about performing this procedure, contact an authorized service dealer or call 1--800--554--6723.

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Manual de Instrucciones Manuel d’Instructions 530163906 10/20/03Fuel Safety Operator SafetyUnit / Maintenance Safety Cutting Safety Adjusting the HandleTransporting and Storage Attaching ShieldStop Switch Choke Know Your TrimmerPrimer Bulb Before Starting EngineHOW to Stop Your Unit HOW to Start Your UnitStarting a Warm Engine Starting a Flooded EngineOperating Position Trimmer Line AdvanceCutting Methods Right WrongInspect and Clean Unit and Labels Clean AIR FilterCheck for Loose Fasteners and Parts Check for Damaged or Worn PartsLine Replacement Carburetor AdjustmentEngine will not idle when the throttle is re- leased Replace Spark PlugMotors or switches, furnaces, etc Seasonal StorageFuel System EngineTroubleshooting Table Cause Remedy Policy of Electrolux Home Tions The U.S. Environmental ProtectionNANCE, Replacement and Repair

530163906, XT260 specifications

The Weed Eater XT260 is a powerful and versatile gas trimmer designed to tackle even the toughest landscaping jobs. Engineered for both professional landscapers and avid gardeners, this trimmer combines performance, durability, and ease of use. One of its standout features is a reliable 26cc 2-cycle engine that delivers robust power while ensuring a lightweight design for effortless maneuverability.

The XT260 is equipped with an advanced auto-feed line system, which allows for continuous trimming without the hassle of manual line adjustments. This feature is especially beneficial for users who need to maintain long stretches of garden or lawn, as it ensures a consistent cutting performance. In addition, the trimmer utilizes a dual line system that cuts with a wider swath, significantly improving efficiency while reducing the time spent on maintenance tasks.

Another key characteristic of the Weed Eater XT260 is its ergonomic design. The handle is shaped for comfort and control, reducing fatigue during extended use. The adjustable handle can be customized to fit various user heights, giving a personalized touch to the operation experience. Moreover, the lightweight construction, weighing in at just over 10 pounds, makes it easy to carry and maneuver around trees, shrubs, and other landscaping obstacles.

The XT260 also features a reliable starting mechanism that minimizes the effort required to start the engine. This is especially advantageous for users who may find traditional starting procedures laborious. Furthermore, the trimmer is designed with a low-emission engine that adheres to environmental standards, ensuring that users can maintain their lawns responsibly while minimizing their carbon footprint.

In terms of durability, the Weed Eater XT260 is built with high-quality materials that withstand the rigors of regular use. The spool housing is designed to protect the line and motor from debris, extending the life of the trimmer. Users will also appreciate the ease of accessibility for repairs and maintenance, further enhancing the longevity of the machine.

Overall, the Weed Eater XT260 is a reliable, efficient, and user-friendly gas trimmer that stands out in the competitive landscaping market. Its combination of power, ease of use, and advanced features makes it a top choice for anyone looking to maintain their garden or lawn effectively. Whether you're tackling overgrown areas or performing routine edging, this trimmer is designed to meet and exceed expectations.
Top Page Image Contents