Murray 425016x48A manual HOW to Install the Seat, HOW to Assemble the Steering Wheel

Page 11

ASSEMBLY

HOW TO INSTALL THE SEAT

Use the fasteners shown below to install the seat. The fasteners are shown at full size.

3.Check the operating position of the seat. If the seat needs to be adjusted, loosen the two wing bolts. Slide the seat forward or backward along the seat adjusting holes as shown. Tighten the wing bolts (A).

 

 

Seat

 

 

 

Seat Hinge

 

 

 

Seat

(A)

(B)

Adjusting Hole

 

 

1001054

17x47

B

 

 

 

A

 

 

 

1. Carefully remove the plastic bag from the seat.

 

 

2. Align the holes in the seat hinge to the holes in the seat

 

 

(Figure 1). Fasten the seat to the seat hinge with the fasteners

 

Figure 1

as shown.

 

 

 

 

 

HOW TO ASSEMBLE THE STEERING WHEEL

Decal

 

Fasteners are not required to assemble the steering wheel. Attach

 

(Optional)

 

the steering wheel as follows:

 

Cover

 

1.Make sure the front wheels point forward.

2.Look at the hub of the steering wheel. Make sure the locking clip is in place inside the hub.

Steering Wheel

3.Slide the bellows over the steering post (Figure 2).

NOTE: Before attachment of the steering wheel, make sure that the front wheels point forward and are straight. For proper alignment of the steering wheel, see Figure 2.

4.

Slide the steering wheel onto the steering post. Push on the

Bellows

 

steering wheel. The steering wheel will lock onto the steering

 

 

post. Pull on the steering wheel. Make sure the steering wheel

Steering Post

 

is locked in place.

 

5.

Attach the cover to the steering wheel.

Straight

6.Some models have an optional decal in the parts bag. Attach

the decal to the center of the steering wheel as shown.

Figure 2

F-050746L

11

Image 11
Contents Model Table of Contents Environmental Awareness OWNER’S InformationII. Slope operation Safe Mowing Guide Safe Mowing Guide Safe Mowing Guide Before Mowing Steps to FollowControl And Operating Pictorials Safety Warning PictorialsInternational Pictorials International PictorialsAssembly AssemblyHOW to Assemble the Steering Wheel HOW to Install the SeatHOW to Install the Battery Cables HOW to Assemble the Gauge WheelsMaintenance Free Battery HOW to Charge Maintenance Free BatteryCheck the Tires HOW to Prepare the EngineCheck the Level of the Mower Housing IMPORTANT! Before YOU Start MowingLift Lever OperationLocation of Controls Attachments Electrical Safety SystemHOW to Operate the Ignition KEY Switch HOW to USE the Throttle ControlSee the Instruction Book for the Attachment HOW to USE Blade Rotation ControlHOW to USE the Shift Lever HOW to Transport the Unit HOW to SET the Parking BrakeHOW to Change the Cutting Height HOW to Stop the UnitHOW to Operate the Unit on Hills HOW to Operate with the Mower HousingCarburetor HOW to Start the EngineBefore Starting the Engine Mowing and Bagging Tips Operating TipsGeneral Recommendations MaintenanceFrequency Maintenance Required Comments HOW to Check the MufflerInspect Blade HOW to Remove and Install the BladeHOW to Sharpen the Blade HOW to Adjust the Blade Rotation Control HOW to Check and Adjust the Drive Brake HOW to Check and Adjust the ClutchDisconnect the adjuster nut from the shifter bracket Figure HOW to Adjust the Shift LeverHOW to Check the Fuel Filter Where to LubricateHOW to Install the Mower Housing HOW to Remove the Mower HousingHOW to Adjust the Gauge Wheels HOW to Level the Mower Housing Removal HOW to Replace Motion Drive BeltInstallation HOW to Replace the Mower Drive Belt Front Wheel HOW to Install the WheelsBattery HOW to Replace the FuseHOW to Replace the Light Bulb HOW to Clean the Mower HousingTrouble Shooting Chart USA 050746L050746L Chassis & Hood Repair PartsKey Description Motion Drive Motion Drive Repair Parts Steering Key Part Description Mower Housing Suspension Key Description Mower Housing Complete Mower Housing Assy Repair Parts Engine Mount Engine Mount Model Electrical System 050746L 050746L 050746L Index Model No Bushel Capacity Model No