Murray 425014x92B manual HOW to USE Blade Rotation Control, HOW to USE the Shift Lever

Page 16

OPERATION

HOW TO USE

THE BLADE ROTATION CONTROL

The blade rotation control is next to the steering wheel (Figure 7). Use the blade rotation control to engage the blade(s) or to operate a snow thrower attachment.

1.Before you start the engine, make sure the blade rotation con- trol is in the DISENGAGE position.

2.Move the blade rotation control to the ENGAGE position to rotate the blade(s).

Note: If the engine stops when you engage the blade(s), the transmission is in reverse.

3.Move the blade rotation control to the DISENGAGE position to stop the blade(s). Before you leave the operator’s position, make sure the blade(s) has stopped rotating.

4.Before you ride the unit across a sidewalk or a road, move the blade rotation control to the DISENGAGE position.

5.Before operating in reverse, move the blade rotation control to the DISENGAGED position. If the blade rotation control is not in the DISENGAGED position, the engine will stop when the speed control pedal/shift lever is moved to REVERSE position.

WARNING: Always keep your hands and feet away from the blade, deflector opening, and the mower housing when the engine runs.

Disengage

Position

Blade Rotation Control

Engage Position

Figure 7

HOW TO USE THE SHIFT LEVER

To change the forward speed or the direction of the unit, follow the steps below.

CAUTION: Before you move the shift lever, completely push the clutch/brake pedal forward to stop the unit. If the unit is not stopped, the gearbox can be damaged.

1.Completely push the clutch/brake pedal forward to stop the unit. Keep your foot on the pedal.

2.Move the throttle control lever to the SLOW position.

3.To go forward, move the shift lever to a forward speed setting.

4.To go backward, move the shift lever to reverse. Always disen- gage blades and look down and behind before and while back- ing.

5.Slowly release the clutch/brake pedal. Do not keep your foot on the pedal.

6.Move the throttle control to the FAST position.

FUNCTION

SHIFT LEVER

THROTTLE

 

5−6 Speeds

 

 

 

 

Trimming

1

 

Snow Thrower

 

 

 

 

 

Bagging Grass

1 or 2

 

 

 

FAST

Mulching Grass

1 or 2

CHOKE

 

 

 

Normal Mowing

2 or 3

FAST

 

 

 

Easy Mowing

3 or 4

 

Snow Blade

 

SLOW

 

 

THROTTLE

Transport

5-6

 

 

 

 

Attachments

*

 

 

 

 

* See the Instruction Book for the Attachment.

F-050706L

16

Image 16
Contents Model Table of Contents OWNER’S Information Environmental AwarenessII. Slope operation Safe Mowing Guide Safe Mowing Guide Safe Mowing Guide Steps to Follow Before MowingSafety Warning Pictorials International PictorialsInternational Pictorials Control And Operating PictorialsAssembly AssemblyHOW to Install the Seat HOW to Assemble the Steering WheelHOW to Assemble the Gauge Wheels Maintenance Free BatteryHOW to Charge Maintenance Free Battery HOW to Install the Battery CablesHOW to Prepare the Engine Check the Level of the Mower HousingIMPORTANT! Before YOU Start Mowing Check the TiresLocation of Controls OperationLift Lever Electrical Safety System HOW to Operate the Ignition KEY SwitchHOW to USE the Throttle Control AttachmentsHOW to USE the Shift Lever HOW to USE Blade Rotation ControlSee the Instruction Book for the Attachment HOW to SET the Parking Brake HOW to Change the Cutting HeightHOW to Stop the Unit HOW to Transport the UnitHOW to Operate with the Mower Housing HOW to Operate the Unit on HillsBefore Starting the Engine HOW to Start the EngineCarburetor Operating Tips Mowing and Bagging TipsMaintenance Frequency Maintenance Required CommentsHOW to Check the Muffler General RecommendationsHOW to Sharpen the Blade HOW to Remove and Install the BladeInspect Blade HOW to Adjust the Blade Rotation Control HOW to Check and Adjust the Clutch HOW to Check and Adjust the Drive BrakeHOW to Adjust the Shift Lever Disconnect the adjuster nut from the shifter bracket FigureWhere to Lubricate HOW to Check the Fuel FilterHOW to Remove the Mower Housing HOW to Install the Mower HousingHOW to Adjust the Gauge Wheels HOW to Level the Mower Housing HOW to Replace Motion Drive Belt RemovalInstallation HOW to Replace the Mower Drive Belt HOW to Install the Wheels Front WheelHOW to Replace the Fuse HOW to Replace the Light BulbHOW to Clean the Mower Housing BatteryTrouble Shooting Chart 050706L USA050706L Repair Parts Chassis & HoodKey Description Motion Drive Motion Drive Repair Parts Steering Key Part Description Repair Parts Mower Housing Suspension Mower Housing Suspension Mower Housing Complete Mower Housing Assy Repair Parts Engine Mount Engine Mount Wiring Harness for Electrical System 050706L 050706L 050706L Index Model No Model No Bushel Capacity