Murray 405030x48A manual HOW to Replace Motion Drive Belt, Removal

Page 27

MAINTENANCE

HOW TO REPLACE

THE MOTION DRIVE BELT

REMOVAL

1.Remove the mower housing. See the instructions on “How To Remove The Mower Housing”.

2.Completely push the pedal forward and engage the parking brake.

3.Remove the idler pulley (Figure 26).

Drive Pulley

Motion

Drive Belt

Idler Pulley

Loosen The

Belt Guides

Figure 26

4.To access the belt guides, remove the battery and battery tray. See “How To Remove The Battery”.

5.Loosen the belt guides at the drive pulley (Figure 27).

Seat Spring

Belt Guides

Figure 27

6.Remove the motion drive belt from the drive pulley (Figure 26).

7.Remove the adjuster nut from the shifter bracket (Figure 28). Pull the motion drive belt over the shifter bracket.

Shift

 

Link

Adjuster Nut

 

 

Shifter

 

Bracket

 

Hair

 

Pin

Motion Drive Belt

 

 

Figure 28

8.To remove the motion drive belt from the stack pulley, pull the front end of the belt under the stack pulley and then back between the stack pulley and the steering plate (Figure 29).

FRONT

Stack Pulley

Steering

 

 

Plate

Motion

Belt Guides

 

Drive

 

Belt

Figure 29

9.Remove the access panel (Figure 30).

10.Remove the two screws that attach the steering shaft assembly (Figure 30). Raise the steering wheel and steering shaft assembly. Pull the motion drive belt under the steering shaft assembly.

Screw

 

 

Steering Shaft

 

 

Assembly

 

 

Motion Drive

 

 

Belt

Access Panel

Figure 30

 

11.Remove the motion drive belt. A correct replacement part or assistance is available from an Authorized Service Center in your area.

F-030749L

27

Page 26 Page 28
Image 27
Page 26 Page 28
Contents Model Table of Contents Responsibility of the Owner OWNER’S InformationII. Slope operation Safe Mowing Guide Safe Mowing Guide Safe Mowing Guide Before Mowing Steps to FollowInternational Pictorials International PictorialsAssembly AssemblyHOW to Assemble the Steering Wheel HOW to Install the SeatIMPORTANT! Before YOU Start Mowing Maintenance Free BatteryHOW to Install the Battery Cables HOW to Prepare the EngineOperation Location of ControlsLift Lever HOW to USE the Throttle Control HOW to USE the Shift LeverAttachments HOW to Transport the Unit HOW to SET the Parking BrakeHOW to Change the Cutting Height HOW to Stop the UnitHOW to Operate the Unit on Hills HOW to Operate with the Mower HousingHOW to Start the Engine Before Starting the EngineCarburetor Mowing and Bagging Tips Operating TipsGeneral Recommendations MaintenanceMaintenance Chart HOW to Check the MufflerHOW to Remove and Install the Blade HOW to Sharpen the BladeInspect Blade HOW to Adjust the Blade Rotation Control HOW to Check and Adjust the Drive Brake HOW to Check and Adjust the ClutchDisconnect the adjuster nut from the shifter bracket Figure HOW to Adjust the Shift LeverHOW to Check the Fuel Filter Where to LubricateHOW to Install the Mower Housing HOW to Remove the Mower HousingHOW to Level the Mower Housing Removal HOW to Replace Motion Drive BeltInstallation HOW to Replace the Mower Drive Belt Front Wheel HOW to Install the WheelsBattery HOW to Replace the FuseHOW to Replace the Light Bulb HOW to Clean the Mower HousingProblem The engine will not start Trouble Shooting ChartMURRAY, INC. Lawn Mower Central Parts Distributors Chassis & Hood Repair PartsKey Description Motion Drive Motion Drive Steering Key Part Description Mower Housing Suspension Key Description Mower Housing 776001 Repair Parts Engine Mount Engine Mount Repair Parts Electrical System Electrical System 030749L 030749L 030749L Index Lawn Tractor Accessories

405030x48A specifications

The Murray 405030x48A is a powerful and versatile lawn mower designed to cater to a range of lawn care needs. This machine stands out for its efficiency, durability, and user-friendly features, making it an excellent choice for both homeowners and professionals seeking a reliable solution for maintaining their lawns.

One of the most noteworthy features of the Murray 405030x48A is its robust 30-inch cutting deck, which allows for wide cutting swath, enabling users to cover more ground in less time. This feature is particularly advantageous for larger properties, where maneuverability is essential. The deck is designed for easy height adjustment, granting users the flexibility to choose their preferred cutting height between various settings.

Powered by a reliable 405cc engine, the mower generates ample power to tackle even the toughest grass and terrains. This engine is designed to deliver consistent performance, ensuring that the mower runs smoothly, whether on flat lawns or uneven landscapes. The self-propelled function adds to the user experience by providing optimal control and ease of use, allowing users to navigate their lawns comfortably without excessive physical exertion.

The Murray 405030x48A incorporates advanced technologies such as a dual blade system. This system enhances cutting efficiency, resulting in finely mulched grass clippings that decompose quickly and enrich the soil. This eco-friendly feature is a great addition for environmentally-conscious users looking to maintain a healthy lawn.

In terms of build quality, the mower is made from high-grade materials that ensure longevity and resistance to wear and tear. The high rear wheels improve traction, specifically on hilly or uneven terrains, offering superior stability and easing the mowing process.

Another notable characteristic is its compact design, allowing for easy storage and maneuvering in tight spaces. This compactness does not compromise the mower's capabilities, making it a balanced option for both performance and convenience.

The Murray 405030x48A also features easy-to-access controls that enhance user experience, making it suitable for a wide range of users, from novices to experienced gardeners. With its combination of power, efficiency, and innovative features, the Murray 405030x48A stands out as a leading choice for individuals aiming to achieve a pristine lawn with minimal effort.
Top Page Image Contents