MAINTENANCE
HOW TO INSTALL THE WHEELS
If the wheels must be removed for service, make sure they are installed as follows.
Front Wheel
1.Make sure the valve stem is to the outside of the tractor. Slide the front wheel on the spindle (See Figure 33).
2.Fasten the front wheel with washer and cotter pin. Bend the ends of the cotter pin apart to keep the front wheel on the spindle.
3.If your model has hub caps, install the hub caps. Make sure the washer hold the hub caps in place.
Rear Wheel
1.Install the washers and spacer onto the axle as shown in Figure 34.
2.Mount the square key in the key slot (See Figure 34).
3.Make sure the valve stem is to the outside of the tractor. Align the slot in the rear wheel with the square key. Slide the rear wheel on the axle.
4.Fasten the rear wheel with washer and e-ring .
5.If your model has hub caps, install the hub caps. Make sure the washer hold the hub caps in place.
Cotter Pin
Hub Cap
Washer
Washer
Spindle
Valve Stem | Front Wheel |
Figure 33
Rear Wheel | Square Key | |
Key Slot | ||
| ||
| Washer | |
| Axle | |
| Spacer | |
Hub Cap |
| |
Washer |
| |
| ||
Valve Stem | Figure 34 |
31 |