Toro 20066, 20067 manual Safety and Instructional Decals, General Service

Page 3

•Extinguish all cigarettes, cigars, pipes, and other sources of ignition.

•Use only an approved gasoline container.

•Never remove gas cap or add fuel with the engine running. Allow engine to cool before refueling.

•Never refuel the machine indoors.

•Never store the machine or fuel container where there is an open flame, spark, or pilot light such as on a water heater or on other appliances.

•Never fill containers inside a vehicle or on a truck or trailer bed with a plastic liner. Always place containers on the ground away from your vehicle before filling.

•Remove gas-powered equipment from the truck or trailer and refuel it on the ground. If this is not possible, then refuel such equipment with a portable container, rather than from a gasoline dispenser nozzle.

•Keep the nozzle in contact with the rim of the fuel tank or container opening at all times until fueling is complete. Do not use a nozzle lock-open device.

•If fuel is spilled on clothing, change clothing immediately.

•Never overfill fuel tank. Replace gas cap and tighten securely.

Exhaust contains carbon monoxide, an odorless, deadly poison that can kill you.

Do not run the engine indoors or in an enclosed area.

General Service

•Never operate machine in a closed area.

•Keep all nuts and bolts tight to be sure the equipment is in safe working condition.

•Never tamper with safety devices. Check their proper operation regularly.

•Keep machine free of grass, leaves, or other debris build-up. Clean up oil or fuel spillage and remove any fuel-soaked debris. Allow machine to cool before storing.

•If you strike a foreign object, stop and inspect the machine. Repair, if necessary, before starting.

•Never make any adjustments or repairs with the engine running. Disconnect the spark plug wire and ground against engine to prevent unintended starting.

•Check grass catcher components and the discharge guard frequently and replace with manufacturer’s recommended parts, when necessary.

•Mower blades are sharp. Wrap the blade or wear gloves, and use extra caution when servicing them.

•Do not change the engine governor setting or overspeed the engine.

•Maintain or replace safety and instruction labels, as necessary.

Safety and Instructional Decals

Important: Safety and instruction decals are located near areas of potential danger. Replace damaged decals.

Manufacturer’s Mark

1.Indicates the blade is identied as a part from the original machine manufacturer.

94-8072

104-7402

Model 20067 only

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Operators Manual IntroductionSlope Operation SafetyService General OperationGeneral Service Safety and Instructional Decals104-7403 104-7953 Filling the Engine with Oil SetupInstalling the Fuse Unfolding the HandleProduct Overview Charging the BatteryOperation Filling the Fuel TankChecking the Engine Oil Level Adjusting the Cutting Height Starting the Engine Recycling the Clippings Using the Self-propel DriveInstalling the Grass Bag Stopping the EngineInstalling the Side Discharge Chute Side-discharging the ClippingsRemoving the Grass Bag Cutting Grass Operating TipsRemoving the Side Discharge Chute General Mowing TipsMaintenance Recommended Maintenance SchedulesCutting Leaves Preparing for Maintenance Replacing the Air FilterChanging the Engine Oil Lubricating the Wheel Gears Replacing the FuseReplacing the Blade Adjusting the Self-propel Drive Cable Cleaning the Mower StoragePreparing the Mower for Storage Removing the Mower from Storage Folding the HandleToro Total Coverage Guarantee

20066, 20067 specifications

Toro 20067 and Toro 20066 are two of the latest innovations in the world of garden and landscape maintenance, catering to both professional landscapers and avid gardeners. These products embody cutting-edge technologies and features designed to enhance efficiency, ensure durability, and simplify the process of lawn care.

The Toro 20067 model boasts a 22-inch cutting deck that allows for a wider cutting path, making it ideal for medium to large lawns. Its powerful 7.25 ft-lb gross torque Briggs & Stratton engine offers reliable performance, enabling users to tackle even the thickest grass with ease. This model is equipped with a Recycler cutting system, allowing for superior grass recycling, which helps to nourish the lawn by returning nutrients back to the soil. The adjustable cutting height feature, ranging from 1 to 4 inches, gives users flexibility in achieving their desired lawn aesthetics.

On the other hand, Toro 20066 combines efficiency with a lightweight design, making it perfect for those who prefer maneuverability while mowing. Its 21-inch cutting deck ensures ease of access to tighter areas that larger mowers may struggle to navigate. This model is also powered by a 6.75 ft-lb gross torque engine, offering a perfect balance of power and efficiency. The Toro 20066 comes equipped with a side discharge option, allowing for quick grass disposal without the need for collection bags.

Both models feature Toro's signature Personal Pace self-propelling technology, which adjusts the mower’s speed based on the user’s walking pace. This technology provides a more intuitive and comfortable mowing experience, reducing fatigue during operation. Additionally, the easy-to-use handle controls and foldable design make storage and transport a breeze.

Durability is a key characteristic of both the Toro 20067 and 20066. Made with high-quality materials, these mowers are designed to withstand the rigors of regular use while maintaining their performance over time. With easy-to-maintain components and access to replacement parts, Toro ensures that these machines can serve users effectively for years to come.

In summary, the Toro 20067 and 20066 models stand out for their innovative features, reliable performance, and user-friendly designs. These mowers not only simplify lawn maintenance but also contribute to a lush, healthy lawn, making them an excellent investment for landscaping enthusiasts.
Top Page Image Contents