Weed Eater WT300, 530088156 instruction manual Troubleshooting Table Cause Remedy

Page 8

TROUBLESHOOTING TABLE

WARNING: Always stop unit and disconnect spark plug before performing all of the recommended remedies below except remedies that require operation of the unit.

 

TROUBLE

CAUSE

REMEDY

 

Engine will not

1. Engine flooded.

1. See “Starting a Flooded Engine” in

 

start.

2. Fuel tank empty.

 

Operation Section.

 

 

2. Fill tank with correct fuel mixture.

 

 

3. Spark plug not firing.

3. Install new spark plug.

 

 

4. Fuel not reaching

4. Check for dirty fuel filter; replace.

 

 

 

carburetor.

 

Check for kinked or split fuel line;

 

 

5. Carburetor requires

 

repair or replace.

 

 

5. See “Carburetor Adjustment” in

 

 

 

adjustment.

 

Service and Adjustments Section.

 

 

 

 

 

 

 

Engine will

1.

Carburetor requires

1.

See “Carburetor Adjustment” in

 

not idle

 

adjustment.

 

Service and Adjustments Section.

 

properly.

2.

Crankshaft seals worn.

2.

Contact an authorized service dealer.

 

 

3.

Compression low.

3.

Contact an authorized service dealer.

 

Engine will not

1.

Air filter dirty.

1.

Clean or replace air filter.

 

accelerate,

2. Spark plug fouled.

2.

Clean or replace plug

 

lacks power,

3.

Carburetor requires

 

and regap.

 

or dies under

3.

See “Carburetor Adjustment” in

 

a load.

 

adjustment.

 

Service and Adjustments Section.

 

 

4.

Carbon build-up on

4.

Contact an authorized service dealer.

 

 

 

muffler outlet screen.

 

 

 

 

5.

Compression low.

5.

Contact an authorized service dealer.

 

Engine

1.

Choke partially on.

1.

Adjust choke.

 

smokes

2.

Fuel mixture incorrect.

2.

Empty fuel tank and refill with

 

excessively.

3.

Air filter dirty.

 

correct fuel mixture.

 

 

3.

Clean or replace air filter.

 

 

4.

Carburetor requires

4.

See “Carburetor Adjustment” in

 

 

 

adjustment.

 

Service and Adjustments Section.

 

Engine runs

1. Fuel mixture incorrect.

1.

See “Fueling Engine” in Operation

 

hot.

 

 

 

section.

 

 

2. Spark plug incorrect.

2.

Replace with correct spark plug.

 

 

3. Carburetor requires

3.

See “Carburetor Adjustment” in

 

 

 

adjustment.

 

Service and Adjustments Section.

 

 

4. Carbon build-up on

4.

Contact an authorized service dealer.

 

 

 

muffler outlet screen.

 

 

8

Image 8
Contents Manual de Instrucciones Manuel d’Instructions Operator Safety Unit / Maintenance SafetyFuel Safety Hazard ZoneAttach the Handle Cutting SafetyTransporting and Storage ON/OFF Switch Know Your TrimmerPrimer Bulb ChokeHOW to Stop Your Unit HOW to Start Your UnitBefore Starting Engine Fueling Engine Starting a Warm EngineInspect and Clean Unit and Labels Clean the AIR Intake ScreenClean the AIR Filter Operating PositionCarburetor Adjustments Replace Spark PlugReplacing the Line Seasonal StorageTroubleshooting Table Cause Remedy Electrolux Home PRODUCTS, INC