Weed Eater RTE113C, 545167695 Operating Instructions, Attach the Extension Cord to Your Trimmer

Page 6

OPERATING INSTRUCTIONS

Use only a voltage supply as specified on your unit.

SELECT AN EXTENSION CORD

Extension Cord Gauge Chart

Length of Cord

Gauge

25

Ft. (7.5 m)

18 Gauge

50

Ft. (15 m)

16 Gauge

100 Ft. (30 m)

16 Gauge

 

 

 

Extension cords are available for this unit.

ATTACH THE EXTENSION

CORD TO YOUR TRIMMER

Loop your extension cord through the handle and around the hook as shown. Insure the plug and cord are firmly and fully engaged.

Cord Retainer

WARNING: Use only 0.065 inch (1.65

mm)diameter line. Other sizes of line will not ad- vance properly and will result in improper cutting head function or can cause serious injury. Do not use other materials such as wire, string, rope, etc. Wire can break off during cutting and become a dangerous missile that can cause se- rious injury. See page 2 for warning concerning other cutting devices.

TRIMMING

Hold the bottom of the trimmer head about 3 inches (8 cm) above the ground and at an an- gle. Allow only the tip of the line to make con- tact. Do not force trimmer line into work area.

Trimming

Extension Cord

CORRECT OPERATING POSITION

TrimmingEdging

WARNING: Always wear eye protec- tion. Never lean over the trimmer head. Rocks or debris can ricochet or be thrown into eyes and face and cause blindness or other serious injury.

When operating unit, stand as shown and check for the following:

SWear eye protection and heavy clothing. S Hold trigger handle with right hand and as-

sist handle with left hand.

S Keep unit below waist level.

S Cut only from your right to your left to en- sure debris is thrown away from you. With- out bending over, keep line near and paral- lel to the ground and not crowded into material being cut.

ADVANCING THE CUTTING LINE

Advance line by tapping bottom of cutting head lightly on the ground while unit is running at full speed. A metal line limiter blade at- tached to the shield will cut the line to the proper length.

3 in. (8 cm) above ground

EDGING POSITION

You can press this button and twist the lower portion 180_ counterclockwise into an edging position.

Button

EDGING

While edging allow the tip of the line to make contact. Do not force the line. The edge guard helps protect the unit and keeps the unit from contacting the ground. Take extra caution while edging as objects can be thrown from the trimmer line.

Edging

SCALPING

The scalping technique removes unwanted vegetation down to the ground. Hold the bot- tom of the trimmer head about 3 inches (8 cm) above the ground and at an angle. Allow the tip of the line to strike the ground around trees, posts, monuments, etc. This technique in- creases line wear.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Advertencia AvertissementSafety Rules Operator SafetyElectrical Safety Maintenance Safety Unit SafetyCutting Safety Transporting and StorageInstallation of Assist Handle AssemblyTube Assembly Attaching Edge Guide and ShieldOperation Correct Operating Position Operating InstructionsAttach the Extension Cord to Your Trimmer Advancing the Cutting LineBefore Each USE MaintenanceService and Adjustments After Each USEUnit will not function properly Hub User Replaceable Service PartsInsert the line into the exit hole in the hub SmallTroubleshooting Table Cause Remedy Electrical failureIncorrect line size Statesville Road Canada, contactWeed Eater

952711942, 545167695, RTE113C specifications

The Weed Eater RTE113C is a versatile and highly efficient electric string trimmer designed to tackle tough yard tasks with ease. This model is renowned for its user-friendly operation and powerful performance, making it a popular choice among both novice and experienced gardeners.

One of the standout features of the RTE113C is its 13-inch cutting path, which allows for a wide swath of grass to be trimmed in a single pass. This feature not only enhances efficiency but also minimizes the time spent on yard work. The powerful 6.5 amp motor provides ample power for tackling overgrown areas while ensuring quiet operation, making it suitable for residential areas.

The RTE113C utilizes a strong and durable dual-line cutting system. The trimmer comes equipped with an automatic line advance feature, which allows the user to easily feed more line into the spool simply by tapping the head against the ground. This innovation eliminates the need for manual adjustments, making yard work more convenient and less time-consuming.

Another notable characteristic of the RTE113C is its lightweight and ergonomic design. Weighing only around 5.5 pounds, it reduces user fatigue during longer trimming sessions. The adjustable telescopic shaft allows for customization, accommodating users of different heights and providing enhanced comfort. Additionally, the soft grip handle ensures a secure and comfortable hold, improving overall control during operation.

Safety is also a priority with the RTE113C. The trimmer features a guard that protects the user from flying debris while maintaining visibility of the cutting path. This ensures a safer experience while performing yard tasks.

Versatility is key with this model, which is suitable for trimming grass, edging along sidewalks, and clearing weeds from garden beds. Whether you're maintaining a small yard or tackling larger landscaping projects, the Weed Eater RTE113C provides the power and efficiency needed to achieve a well-groomed lawn.

In conclusion, the Weed Eater RTE113C is an excellent electric string trimmer that combines power, efficiency, and user-friendly features. With its robust construction, automatic line advancement, and thoughtful design, it stands out as a reliable tool for anyone looking to keep their lawn pristine and well-maintained.
Top Page Image Contents