S Inspect unit before each use for worn, loose, missing or damaged parts. Do not use until unit is in proper working order.
S Do not set unit on any surface except a clean, hard area. Debris such as gravel, sand, dust, grass, etc., could be picked up by the air intake and thrown out through dis- charge opening, damaging unit, property, or causing serious injury to bystanders or operator.
SNever place objects inside the blower tubes or blower outlet. Always direct the blowing debris away from people, animals, glass, and solid objects such as trees, automo- biles, walls, etc. The force of air can cause rocks, dirt, or sticks to be thrown or to rico- chet which can hurt people or animals, break glass, or cause other damage.
SCheck air intake opening and blower tubes frequently, always with unit stopped and power source disconnected. Keep vents and discharge tubes free of debris which can accumulate and restrict proper air flow.
SNever place any object in air intake opening as this could restrict proper air flow and
cause damage to the unit.
SNever douse or squirt the unit with water or any other liquid. Clean unit and labels with a damp sponge. Keep handles dry, clean,
and free from oil and grease.
SNever use for spreading chemicals, fertiliz- ers, or other substances which may contain toxic materials.
STo avoid spreading fire, do not use near leaf or brush fires, fireplaces, barbecue pits, ashtrays, etc.
CULTIVATOR SAFETY
DANGER: RISK OF CUT. KEEP HANDS AND FEET AWAY FROM TINES AND CUTTING AREA. Rotating tines can cause se- rious injury. Do not attempt to clear away cut material or hold material to be cut when the mo- tor is running. Make sure powerhead is stopped and disconnected from power source when re- moving jammed material from the tines. Do not grab or hold attachment by the tines.
WARNING: Rotating tines can cause serious injury. Keep away from rotating tines. Stop the unit and disconnect the power source before unclogging tines or making repairs.
WARNING: Inspect the area to be cultivated before starting the unit. Remove all debris and hard and sharp objects such as rocks, vines, branches, rope, string, etc.
SHold the unit firmly with both hands.
SKeep firm footing and balance. Do not over- reach or stand on unstable surfaces.
SLook behind and use care when backing up.
SKeep all parts of your body away from the tines.
SNever operate the cultivator without the tine guard in place and properly secured.
SKeep the tines and guard clear of debris. Al- ways wear gloves when servicing or clean- ing the tines. The tines become very sharp
from use.
SAvoid heavy contact with solid objects that might stop the tines. If heavy contact oc- curs, stop the motor and inspect the unit for
damage.
SAfter striking a foreign object, stop the unit, disconnect the power source and inspect the cultivator for damage. Repair before re-
starting.
SDisconnect attachment from the drive mo- tor before cleaning the tines with a hose and water to remove any
SDo not run unit at high speed unless cultiva- ting.
EDGER SAFETY
WARNING: Always use handlebar when operating edger attachment. Attach han- dlebar above arrow on safety label on the upper shaft (motor end of unit). If your edger attach- ment does not include a handlebar, a handlebar accessory kit (#530071864) is available from your authorized service dealer. Instructions for assembling handlebar to your unit are included in this kit.
Handlebar
DANGER: RISK OF CUT. KEEP HANDS AND FEET AWAY FROM BLADE AND CUTTING AREA. Do not attempt to clear away cut material when the blade is in motion. Make sure switch is in the off position and the power source is disconnected when removing jammed material from the cutting blade. Do not grab or hold unit by the cutting blade.
WARNING: Inspect the area to be edged before each use. Remove objects (rocks, broken glass, nails, wire, etc.) which can be thrown by the blade or can wrap around the shaft.
WARNING: Blade rotates momen- tarily after the trigger is released. The blade can seriously cut you or others. Allow blade to stop before removing it from the cut.
5