Trimming, Edging | Weed Eater 545186765, 600 guide

SRepeat until you hear the line hitting against the line limiter pin (do not repeat this proce-

dure more than 6 times).

If problems are experienced with the auto- matic line feed, refer to the TROUBLE-

SHOOTING TABLE.

To manually feed the nylon line:

SIf required, the cutting line can be fed out manually.

STo operate, press and release manual line feed button while gently pulling on one of the lines until the line reaches the line limiter pin.

Manual Line

Feed Button

2.Replace the cap, pressing firmly down to- wards the hub to ensure cap is fully se- cured.

3.Check that the cap is secure by trying to remove it without pressing the two latches.

WARNING: Use only 0.065 inch (1.65

mm)diameter line. Other sizes of line will not ad- vance properly and will result in improper cutting head function or can cause serious injury. Do not use other materials such as wire, string, rope, etc. Wire can break off during cutting and become a dangerous missile that can cause se- rious injury. See page 3 for warning concerning other cutting devices.

TRIMMING

Hold the bottom of the trimmer head about 3 inches (8 cm) above the ground and at an an- gle. Allow only the tip of the line to make con- tact. Do not force trimmer line into work area.

Trimming

SWhen the required amount of line is fed out, gently pull on the second line (there is no need to press the manual line feed button

again).

SIf the line extends past the line limiter pin, too much line has been fed out. If too much line is fed out, remove the spool cap and click spool counterclockwise until the line is at the desired length.

To remove spool cap:

1.Press and hold in the two cap release latches.

2.Pull cap away from the hub.

Cap

3 inches (8 cm) above ground

EDGING POSITION

You can twist the lower portion of the unit into an edging position. Press button and twist lower portion of unit as shown in the illustra- tion until it snaps into place. To return to trim- ming position, press button and twist lower portion in opposite direction.

		Cap
	Spool	release
	Spool	latch
		latch

Hub

Eyelet

To reinstall spool cap:

1.Keep all areas of the cap and hub clean. Failure to do so may prevent the cap be- ing securely located in the hub.

Button

EDGING

While edging, allow unit to rest on wheel for extra stability. Edge in direction shown in il- lustration. Allow the tip of the line to make con- tact. Do not force the line. Take extra caution while edging as objects can be thrown from the trimmer line.

545186765, 600 specifications

The Weed Eater 545186765,600 is an advanced, reliable outdoor power tool designed for homeowners and professionals who desire efficiency and ease of use in maintaining their lawns and gardens. With its impressive power and range of features, this string trimmer stands out in the competitive market.

At the heart of the Weed Eater 545186765,600 lies a robust motor that delivers exceptional performance. This powerful engine ensures consistent cutting and trimming even in the thickest of grass and weeds. Its dependable design allows users to tackle tough jobs without the worry of stalling or losing power.

One of the standout characteristics of this model is its lightweight and ergonomic design. Weighing significantly less than many competitors, the 545186765,600 reduces fatigue during extended use. The adjustable handle provides comfort and flexibility, allowing users to maneuver easily in tight spaces or uneven terrain. This user-focused design makes it suitable for extended usage while minimizing strain on the body.

In terms of technology, the Weed Eater 545186765,600 features an innovative bump feed system. This mechanism allows for easy line advancement; simply tap the head on the ground, and the trimmer feeds more line, ensuring uninterrupted cutting. The dual-line capability enhances efficiency, enabling users to cover a wider area in less time.

Durability is another key attribute of the Weed Eater 545186765,600. Constructed with high-quality materials, this string trimmer is designed to withstand the rigors of outdoor use while maintaining peak performance. The weather-resistant components enhance its longevity, making it a worthwhile investment for anyone serious about lawn care.

Furthermore, this model embraces eco-friendly technology. The motor is designed to reduce emissions, making it a better choice for environmentally conscious users. The lower noise output is also a significant advantage, allowing tasks to be completed without disturbing neighbors or wildlife.

Overall, the Weed Eater 545186765,600 is a top-tier string trimmer that combines power, comfort, and efficiency. With its user-friendly features and thoughtful engineering, it is an ideal tool for maintaining a pristine lawn or garden, appealing to both amateur gardeners and professionals alike. Whether trimming borders, tackling overgrown areas, or managing weeds, this powerful trimmer excels in delivering outstanding results.