Palsonic PSML-926 Setting the timer, Timer record stand-by on / off, Checking the timer

You can set the machine to automatically switch on and off at a specified time.

Be sure the clock is set accurately.

Setting the timer

T I M E R

and clock

TIMER

Select the TIMER function.

(Timer display disappears after about 9 seconds.)

FUNCTION

TUNETUNE

TUNETUNE

TUNETUNE

Select, if you want to listen to the radio, tape, CD, or a connected device when the system turns on. Press repeatedly.

Enter 'on' time.

Set the hour of the time the machine is to switch on.

Switch to the minute digits.

Set the minutes of the time the machine is to switch on.

Switch to volume setting.

Set the volume between (MIN.) 1 and (MAX.) 28.

Switch to the time the machine is to switch off again.

Each time you press the button, you cut increase off time from 10 minutes up to 240 minutes.

Exit the setting.

TIMER

Press the button repeatedly to switch :

timer stand-by to play

timer record stand-by to record. timer disable.

TIMER

TIMER

Select the TIMER function.

Press the button repeatedly for the timer items.

Timer record :

Set the timer as above. Load a tape with enough space and without safety hole (page 15) into TAPE 2. Then set timer standby to