Weed Eater GHT 180, GHT 220 Seasonal Storage, Fuel System, Engine, Other, Need ASSISTANCE?

Page 7

WARNING: Perform the following steps after each use:

S Allow engine to cool, and secure the unit before storing or transporting.

SStore unit and fuel in a well ventilated area where fuel vapors cannot reach sparks or open flames from water heaters, electric motors or switches, furnaces, etc.

SStore unit with all guards in place. Position unit so that any sharp object cannot acci-

dentally cause injury.

SStore unit and fuel well out of the reach of children.

SEASONAL STORAGE

Prepare unit for storage at end of season or if it will not be used for 30 days or more.

If your unit is to be stored for a period of time:

SClean the entire unit.

SStore in a clean dry area.

S Clean all parts and check for damage. Have damaged parts repaired or replaced by an authorized service dealer.

SKeep all nuts, bolts, and screws tight.

S Lightly oil external metal surfaces, includ- ing the blade.

To oil the blade, do the following:

SStop the engine and allow blade to come to

a complete stop.

SEnsure ON/OFF switch is in the OFF posi-

tion.

SDisconnect the spark plug wire.

SApply a light machine oil along the edge of the top strap as shown.

OIL

Top Strap

FUEL SYSTEM

Under FUELING ENGINE in the OPERA- TION section of this manual, see message la- beled IMPORTANT regarding the use of ga- sohol in your engine. Fuel stabilizer is an ac- ceptable alternative in minimizing the formation of fuel gum deposits during storage. Add stabi- lizer to gasoline in fuel tank or fuel storage con- tainer. Follow the mix instructions found on sta- bilizer container. Run engine at least 5 minutes after adding stabilizer.

ENGINE

SRemove spark plug and pour 1 teaspoon of 40:1, 2-cycle engine oil (air cooled) through the spark plug opening. Slowly pull the

starter rope 8 to 10 times to distribute oil.

SReplace spark plug with new one of recom-

mended type and heat range (see RE- PLACE SPARK PLUG section).

SClean air filter.

S Check entire unit for loose screws, nuts, and bolts. Replace any damaged, broken, or worn parts.

S At the beginning of the next season, use only fresh fuel having the proper gasoline to oil ratio.

OTHER

SDo not store gasoline from one season to another.

SReplace your gasoline can if it starts to rust.

NEED ASSISTANCE?

Call 1-800-554-6723 for assistance.

NEED SERVICE PARTS?

Contact your authorized service dealer.

-- 7 --

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Manual de Instrucciones Manuel d’Instructions Operate Your Unit Safely Know Your UnitPlan Ahead Handle Fuel with CautionAssembly Throttle Trigger ON/OFF Switch Primer BulbKnow Your Hedge Trimmer ChokeOn OFF Stopping Your EngineStarting Your Engine Starting a Warm EngineStarting a Flooded Engine Inspect and Clean Unit and LabelsClean AIR Filter Carburetor AdjustmentEngine Need Service PARTS?Seasonal Storage Fuel SystemTroubleshooting Table Cause Remedy Consequential Damages Poulan

530086901, GHT 180, GHT 220 specifications

The Weed Eater 530086901, GHT 220, and GHT 180 are popular models in the line of outdoor power equipment designed to tackle various landscaping and gardening tasks. Known for their reliability and efficiency, these trimmers and blowers serve a diverse range of users, from homeowners to professional landscapers.

The Weed Eater 530086901 is a versatile string trimmer that makes cutting grass and weeds effortless. One of its main features is its lightweight design, which allows users to navigate around obstacles easily. The trimmer is equipped with an efficient 2-cycle engine that delivers a robust performance, making it perfect for tackling dense grass and stubborn weeds. Additionally, the automatic line feed system ensures a consistent cutting length, reducing downtime for string replacement. Users appreciate the adjustable handle that enhances comfort and control during operation, catering to varying user heights and preferences.

Switching gears to the GHT 220, this gas-powered hedge trimmer boasts an impressive cutting width that allows for quick and efficient trimming of hedges and bushes. Its dual-action blades not only minimize vibrations but also provide a cleaner cut, resulting in healthier plants. The ergonomic design makes it comfortable to hold during extended use, and the lightweight structure reduces fatigue. The GHT 220 also features an easy-to-use starting system, ensuring that even novice users can fire it up with minimal hassle.

Lastly, the GHT 180 stands out as an excellent option for those looking for a versatile hedge trimmer. With a slightly smaller cutting width compared to the GHT 220, it is perfect for precision trimming tasks. This model is designed with a powerful yet efficient engine that balances power and fuel consumption, providing a longer runtime between refuels. The rotating handle feature allows users to cut in various positions, making it adaptable for different hedge shapes and sizes.

All three models share a commitment to user-friendly operation and durable construction. They incorporate safety features such as blade guards and easy-access throttle controls, prioritizing user safety while enhancing performance. Whether for casual gardening or extensive landscaping projects, the Weed Eater 530086901, GHT 220, and GHT 180 deliver quality and functionality, making them essential tools for maintaining beautiful outdoor spaces. With their advanced technologies and user-centered designs, these models signify a solid investment for anyone serious about lawn care and gardening.
Top Page Image Contents