Nilfisk-Advance America C 110.3 X-TRA, C 100.5 user manual Operating your pressure washer

Page 6

4 Operating your pressure washer

4.1Connection of high pres- sure hose

4.2Mounting of spray lance and Click & Clean nozzles

1.Mount the high pressure hose on the outlet (3).

1.Push the spray lance (6) into the spray gun (7) and screw it on.

Note: The spray lance (6) has a built-in low pres-

sure nozzle that can be used for fl ushing away dirt.

2.Attach the nozzle.

Warning: When

attaching the Click

&Clean nozzles, the pawl on the

side of the spray lance (6) should come out again.

Note: The foam sprayer (10) features a swivel lock, which must be positioned in the hole in the Click & Clean spray lance

(6).

Press the pawl to detach the Click & Clean nozzle.

7

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Nilfisk C Nilfisk C 110.3, C 110.3 X-TRA Index Safety Precautions and WarningsSymbols used to mark StructionsMains power connection Thermal sensorOperation elements DescriptionApplication Model surveyBefore you start using your pressure washer Mounting of trolley handle models with trol- ley handleOperating your pressure washer Water connection Min m and max m willAfter using your pressure washer Frost damages are not covered by the guaranteeMaintenance Cleaning of water inlet filter Cleaning of nozzleCleaning of machine VentsGreasing of couplings Trouble-shooting Warranty conditions Further informationRecycling the washer Main Technical Data Page
Top Page Image Contents