Makita RBC260, RBC230, RBC311, RBC310, RBC261 dimensions Engine Starting and Stopping Procedures

ENGINE STARTING AND STOPPING PROCEDURES

Starting

When the engine is cold (ie. left stopped for more than 5 minutes) or when fuel is added to the engine:

1 ) First place the machine on the ground.

2)Give a gentle push on the primer pump repeatedly (7 - 10 times) until fuel comes into the primer

pump.

3)Close the choke lever.

4)Push the stop switch to "START" position (or opposite of "STOP" position).

5)For RBC230 / RBC261 / RBC311

Squeeze the throttle lever fully. Then release the' throttle lever while depressing the throttle lock button. The throttle lever will now be locked in the "start-up" position.

For RBC260 and RBC310

Press the "LOCK-OFF" switch before squeezing the throttle lever. Then squeeze the throttle lever fully. Release the throttle lever while depressing the throttle lock button. The throttle lever will now be locked in the "start-up" position.

I	( 1 )Primer pump	( 2 )C h o k e lever
	R B C 2 3 0 / R B C 2 6 1 i R B C 3 1 1 I	R B C 2 6 0 / R B C 3 1 0

( 1I S t o p s w i t c h

I R B C 2 3 0 / R B C 2 6 1 / R B C 3 1 1 I R B C 2 6 0 / R B C 3 1 0

1	( 1) T h r o t t l e lever	( 2 ) T h r o t t l e lock b u t t o n
	(3)LOCK-OFF s w i t c h

6)Hold the holder case firmly by your left hand and give several strong pulls to the starter by your right hand.

7)After the engine is started, open the choke lever fully, checking the engine running condition.

G i v e several s t r o n g pulls to t h e starter .

*Immediately after the engine is stopped:

Only perform the Nos. 1, 4 and 6 described above.

8