Makita UH200D (HU01*) specifications Disassembly/Assembly, Gear 12-31, Helical gear, Assembling

P 4/ 8

Repair

[2]DISASSEMBLY/ASSEMBLY

[2]-1. Gear 12-31, Helical gear 47

ASSEMBLING

(1)Assemble Helical gear 47, Gear 12-31. (Figs. 4, 5) And mount them to Housing set (L). (Fig. 6)

Fig. 4

1.Face the crank side of Helical gear 47 to the bottom.

2.Assemble two Pins 4 to Helical gear 47 by pressing with Arbor press.

3.Facing the notch side of Pin 6 to top, pass it through Washer 6 into Helical gear 47.

Crank side of Helical gear 47

Notch

Pin 6

Washer 6

Pin 4 (2pcs.)

Fig. 5	Fig. 6
4. Pass Pin 6 through Gear 12-31	Housing set (L)
and two Washers 6 as drawn below,
then set them in place in Housing L.		Helical gear 47
Pin 6	Rib	Notch on Pin 6
Washer 6
Gear 12-31	DC Motor	5. Assemble Helical gear 47 with
		fitting the notch of Pin 6 on the Rib
		of Housing set (L).
Washer 6

(2)Assemble Protector to housing set. (Center right in Fig. 2)

(3)Mount Crank complete. (Fig. 7)

Fig. 7

<Note>

Crank complete has an interchangeability between UM164D cordless grass shear and UH200D cordless hedge trimmer by reversing as illustrated below.

In case of UH200D, engage this side with Shear blade assembly.

6. Mount Crank complete and Dust guard.

Crank complete

Dust guard

for UM164D for UH200D

(4) Mount Shear blade assembly and Under cover. See Figs. 10, 11 in “[3]-3. Shear Blade Assembly”.