Makita RBC25A instruction manual Safety Rules and Precautions

Page 2

Thank you very much for purchasing your MAKITA STRING TRIMMER. We are proud of and very confident in recommending our MAKITA STRING TRIMMER as a result of our extensive development and substantial knowledge and experience.

Please read and understand this booklet thoroughly before operating your MAKITA STRING TRIMMER in order to take advantage of its outstanding performance.

STRING TRIMMERS are designed for trimming grass, weeds and low growth, non-wood ground cover. Always use the proper machine for the job.

SAFETY RULES AND PRECAUTIONS

Proper safety precautions must be observed. Like all power equipment this unit must be handled carefully. DO NOT EXPOSE YOURSELF OR OTHERS TO DANGER. Follow these general rules. Do not permit others to use this machine unless they are thoroughly responsible and have read and understood the machine manual and are trained in its operation.

1. Always wear safety goggles for eye protection. Dress appropriately; do not wear loose clothing or jewelry that could become caught in moving parts of the unit. Safe, sturdy, nonskid footwear should always be worn. Long hair should be tied back. It is recommended that legs and feet be covered to protect them from flying debris during operation.

2. Inspect the entire machine for loose parts (nuts, bolts, screws, etc.) and any damage. Repair or replace as necessary before using the machine.

3.DO NOT US € any attachment with this power head other than one recommended by MAKITA. Serious injury to the user or bystanders or damage to the engine could result.

4.Keep the handles free of oil and fuel.

5.Always use the proper handle and shoulder strap when cutting.

6 . Do not smoke while mixing fuel or filling tank.

7.Do not mix fuel in an enclosed room or near open flames. Assure adequate ventilation.

8.Always mix and store the fuel in a properly marked container that is approved by local codes and ordinances for such usage.

9.Never remove the fuel tank cap while the engine is running.

10.Never start or run the engine inside a closed room or building. Fumes from the exhaust contain dangerous carbon monoxide.

11.Never attempt to make engine adjustments while the unit is running and strapped to the operator. Always make engine adjustments with the unit resting on a flat, clear surface.

12.Do not use the unit if it is damaged or poorly adjusted. Never remove the machine's guard.

13.Inspect the area to be cut and remove all debris that could become entangled in the nylon cutting head. Also remove any objects that the unit may throw during cutting.

14.Keep children away. Onlookers should be kept at a safe distance from the work area, at least 50 feet.

15.Never leave the machine unattended.

16.Do no use this unit for any jobs other than those for which it is intended as described in the manual.

17.Do not overreach. Keep proper footing and balance at all times. Do not run the unit while standing on a ladder or any other unstable footing location.

18.Keep hands and feet clear of the nylon cutting head while the unit is in use.

19.Do not use this type of machine for sweeping away debris.

20.Do not use the unit when you are tired or under the influence of medication, drugs or alcohol.

21.Do not use a damaged cutting head. If a stone or any other obstacle is hit, stop the engine and check the nylon cutting head. A broken or unbalanced nylon cutting head must never be used. Follow instructions for changing accessories.

22.Do not store in a closed area where fuel vapors can reach an open flame from hot water heaters, - . furnaces, etc. Store in a locked, well ventilated area only.

2

Page 1 Page 3
Image 2
Page 1 Page 3
Contents String Trimmer Safety Rules and Precautions Engine Fuel Lines and Other Engine Parts Equipment Description Mounting the protector Fig Assembly InstructionsMounting the handle Fig Mounting the nylon cutting headCheck points before operation Preparing for OperationFuel and oil mixture Procedures Attachment, adjustment and detachment of the shoulder strap Correct Handling of the MachineDaily CHECK-UP and Maintenance Reassembly Instructions Reassembling the drive shaft and the engineBump & Feed BF4 Safety InstructionsInstallation Instructions for USE of the Nylon Cutting HeadReplacing the nylon cord Manufacturers Warranty Coverage Owners Warranty ResponsibilitiesWhat is Covered Under this Warranty Limited WarrantyWarranty Period EMISSION-RELATED Parts Covered Under this WarrantyWhat is not Covered Under this Warranty Maintenance Schedule ProcedureintervalRepair and Replacement of EMISSION-RELATED Parts HOW to File a Warranty Claim Where to GET Warranty Services

RBC25A specifications

The Makita RBC25A is a powerful and efficient brush cutter, designed to meet the demanding needs of both professionals and avid gardeners. Equipped with a reliable 24.5cc two-stroke engine, this tool delivers robust performance, ensuring that even the toughest vegetation can be tackled with ease. Its lightweight design, weighing in at just 10.5 pounds, provides excellent maneuverability, allowing users to work for extended periods without experiencing fatigue.

One of the standout features of the RBC25A is its Easy Start technology, which simplifies the process of starting the engine. With this technology, users can start the machine with minimal effort, making it more accessible to those who may struggle with traditional starting systems. Additionally, the engine is designed with low emissions, ensuring that it operates in an environmentally friendly manner while still delivering the power needed for demanding tasks.

The RBC25A is equipped with a commercial-grade geared head that enhances cutting efficiency and durability. This feature is essential for maintaining consistent performance over time, especially when working on dense undergrowth or thick grass. The brush cutter also includes a dual-line bump feed head, which allows for quick line advancement, ensuring you spend less time reloading and more time cutting.

Ergonomics are a critical consideration in the design of the RBC25A. The machine features a comfortable, padded handle that reduces vibration and improves user control, making it easier to handle during extended use. The adjustable handle also allows users to customize the grip for comfort and precision, enhancing overall performance.

Another noteworthy characteristic of the Makita RBC25A is its compatibility with various attachments. This versatility makes it an excellent choice for users who require a multifunctional tool for a variety of landscaping tasks. Whether it's edging, pruning, or trimming, the RBC25A can adapt to suit different jobs effectively.

In summary, the Makita RBC25A is a feature-rich brush cutter that combines power, efficiency, and ease of use. With its advanced technologies, ergonomic design, and versatility, it stands out as a favorite among landscaping professionals and garden enthusiasts alike, proving to be a valuable addition to any toolkit.
Top Page Image Contents