Operating the HCA-1201A, Power Switch

Operating the HCA-1201A

Refer to Figure #1

Power Switch

Press the upper side to turn the unit on manually; press the lower side to turn the unit off.

Standby/Normal Operation LEDs

The red Standby LED will light when the amplifier is turned on either with the power switch or an external DC trigger. It will stay lit about four to five seconds while the amplifier circuits stabilize. After that, the red LED will turn off and the green normal LED will signal that the protection relays have switched off and that the amplifier is ready to operate. The Standby LED will also light whenever there is a short circuit or other fault that triggers the protection circuitry. This may indicate one of the following conditions: DC present at the amplifier's input, a speaker impedance overload, a short circuited speaker line, or possible internal fault. If this LED remains lit, remove power to the amplifier and check all connections. During this time, the protection circuits should automatically reset. If the red LED stays lit after you reapply power, contact your Parasound Dealer for further advice.

Maintaining Your HCA-1201A

Your HCA-1201A requires no periodic maintenance and has no user serviceable parts inside. To avoid the risk of electric shock, do not remove the top cover. If necessary, clean the chassis with a soft cloth moistened only with window cleaner or clear water. Never use solvents or abrasives.

Main Power Fuse

There is an external fuse located within the AC receptacle that may blow as a result of an internal fault condition. This fuse protects the unit from possible damage to internal parts. Never replace this fuse with a fuse of higher value than installed from the factory. Substitution of a larger fuse may create serious stress and damage to internal parts and will void your warranty.

In Case of Trouble

Call your Parasound dealer who should be able to suggest simple diagnostic tests you can easily perform. If you determine that your HCA-1201A should be serviced, Contact Parasound or an Authorized Parasound Warranty Center for inspection and possible servicing.

Returning your HCA-1201A to Parasound for Service (USA Only)

If we determine that you should send your HCA-1201A to Parasound, you will need to obtain a Return Authorization (RA) number. The RA number must be clearly marked on the outer carton only. Ship the unit with adequate insurance and a copy of your purchase receipt inside to validate your warranty. Warranty repairs will only be performed by Parasound or authorized warranty centers on sets where your purchase receipt is from an Authorized Parasound Dealer or Parasound Reseller. Units purchased from unauthorized dealers are not eligible for warranty repair. Units that arrive without an RA number, without a suitable shipping carton or with evidence of improper internal packing materials may be refused. We do not accept collect shipments. After repair under warranty, the unit will be returned to you via prepaid common carrier within the Continental United States. In the case of a non-warranty repair, contact us and we will advise you of the repair charges before you ship the unit to us. The same packing and Return Authorization number requirements apply.

-8-

HCA-1201A specifications

The Parasound HCA-1201A is a high-performance, single-channel power amplifier that stands out for its remarkable power output, sound quality, and robust construction. Designed for both audiophiles and professionals, this amplifier is a testament to Parasound's dedication to delivering superior audio performance.

One of the notable features of the HCA-1201A is its powerful amplification capability. It delivers up to 250 watts into 4 ohms and 150 watts into 8 ohms, making it suitable for driving a wide variety of speakers with ease. This high power output allows for dynamic sound reproduction, enabling the amplifier to handle peaks in music without distortion or loss of clarity.

The HCA-1201A utilizes an advanced Class AB circuitry. This technology combines the benefits of Class A and Class B designs, providing low distortion and high efficiency. The result is an amplifier that can deliver a warm, rich sound while maintaining excellent dynamic range. The build quality is also impressive, with a solid metal chassis designed to minimize vibrations and enhance sonic performance.

A key characteristic of the HCA-1201A is its dual mono design, which means that each channel has its power supply and amplifier section. This reduces crosstalk and allows for better separation of sound channels, contributing to an immersive listening experience. Additionally, the amplifier features large filter capacitors to ensure stable power delivery, even during intense musical passages.

The amplifier is equipped with a host of protection features, including short-circuit protection, thermal overload protection, and DC offset safeguards. These features help ensure the longevity and reliability of the device, making it suitable for both home theater and professional audio applications.

The Parasound HCA-1201A also includes balanced XLR and unbalanced RCA inputs, providing flexibility in connecting various audio sources. The signal-to-noise ratio is commendably high, ensuring that your audio remains clear and free from unwanted noise.

In conclusion, the Parasound HCA-1201A is a powerful, high-quality amplifier that combines robust design with advanced audio technologies. Whether used in a home audio setup or a professional environment, it offers exceptional performance that appeals to serious music enthusiasts and sound professionals alike. Its unique features and reliable performance make it a valuable component in any audio system.