A. GENERAL DESCRIPTION
1) | Rear handle | 17) | Cutting depth gauge |
2) | Rear hand guard | 18) | Cutting tooth |
3) | Front handle | 19) | Bar |
4) | Front hand guard/chain brake lever | 20) | Chain cover |
5) | Chain tensioner knob/screw | 21) | Pinion |
6) | Chain tensioner pin | 22) | Chain catcher |
7) | Oil tank cap | 23) | Bar retaining screws |
8) | Oil tank inspection gauge | 24) | Bar retaining knob / nuts |
9) | Air vents | 25) | Nose sprocket |
10) | Cable | 26) | Guide bar cover guard |
11) | Manual | 27) | Spiked bumper |
12) | Switch | 28) | Chain tensioner pin housing |
13) | Switch block | 29) | Lubrication hole |
14) | Chain | 30) | Guide groove |
15) | Drive tooth | 31) | Oil pump adjustment knob |
16)Cutting link
LEGEND:
| 1) | Guaranteed noise level according to directive |
|
| 2000/14/EC |
| 2) | Double insulation |
| 3) | CE marking of conformity |
| 4) | Protection degree |
| 5) | Rated frequency |
| 6) | Rated power |
| 7) | Alternate current |
| 8) | Rated voltage |
| 9) | Type |
| 10) | Prefix |
| 11) | Product code |
| 12) | Year of manufacture (last two figures; e.g. 04=2004) |
| 13) | Maximum bar length |
| 14) | Manufacturer’s name and address |
Example of identification label | 15) | Serial number |
| 16) | Model |
ENGLISH – 1