A. GENERAL DESCRIPTION
1) | Rear handle | 17) | Cutting depth gauge |
2) | Rear hand guard | 18) | Cutting tooth |
3) | Front handle | 19) | Bar |
4) | Front hand guard/chain brake lever | 20) | Chain cover |
5) | Chain tensioner knob/screw | 21) | Pinion |
6) | Chain tensioner pin | 22) | Chain catcher |
7) | Oil tank cap | 23) | Bar retaining screws |
8) | Oil tank inspection gauge | 24) | Bar retaining knob / nuts |
9) | Air vents | 25) | Nose sprocket |
10) | Cable | 26) | Guide bar cover guard |
11) | Manual | 27) | Spiked bumper |
12) | Switch | 28) | Chain tensioner pin housing |
13) | Switch block | 29) | Lubrication hole |
14) | Chain | 30) | Guide groove |
15) | Drive tooth | 31) | Oil pump adjustment knob |
16)Cutting link
LEGEND:
1) Guaranteed noise level according to directive 2000/14/EC
2) Double insulation
3) CE marking of conformity
4) Protection degree
5) Rated frequency
6) Rated power
7) Alternate current
8) Rated voltage
9) Model/type
10) Prefix – Serial number
11) Product code
12) Year of manufacture (last two figures; e.g. 04=2004)
13) Maximum bar length
14) Manufacturer’s name and address
Example of identification label
ENGLISH – 1