STEP 9: (SEE FIGURE 9)
•Slide the front flaps of the hopper bag up onto the front of the lower hopper tubes. Secure the bag frame tube to the lower hopper tubes using two clevis pins (28) and hair pins (19).
NOTE: Be sure front flaps of hopper bag are positioned above clevis pins.
•Snap the sides of the bag to the bottom of the bag at the front corners .
19 |
28 |
figure 9
STEP 10: (SEE FIGURE 10)
•Slide a rear hopper tube (11) onto the two upper hopper tubes (6).
•Secure the upper hopper tubes (6) to the rear hopper tube (11) using two 1/4" x 1" curved head bolts (26) and 1/4" nylock nuts (24). Bolt heads should face up.
26 | 11 |
| |
| 24 |
6 |
|
| 26 |
| 24 |
| 6 |
figure 10
STEP 11: (SEE FIGURE 11)
•Slide the assembled tubes down through the flaps in the sides of the hopper bag (3) as shown.
figure 11
STEP 12: (SEE FIGURE 12)
•Slide the assembled tubes back up underneath the wind screen as shown.
figure 12
Call | 7 |
DO NOT RETURN TO STORE |
|