Gardena WT1030 operating instructions Changing the watering time, Setting the Watering Time

G

5.

Changing the watering time:

10

Setting the Watering Time:

5.Set the watering time on the outer black scale (Run Time Minutes) using the control knob and confirm your selection by pressing the OK button (e.g.: 30 minutes).

The program you have selected is now active.

On hot or cooler days you can change the watering time before the program starts without having to re-enter the time of day, watering starting time or watering cycle.

1.Select the changed watering time on the outer black scale (Run Time Minutes) by turning the control knob. (e.g.: 20 min- utes). The Run Time LED flashes.

2.Confirm the watering time you have selected by pressing the

OK button.

The changed watering time is now active.

G

Manual watering (ON): On especially hot days the programmed watering cycle is some- times insufficient. You can then turn on your sprinkler or irrigation system manually.

The program you have set remains unchanged.

v Turn the control knob to ON.

The valve opens for 30 minutes independent of the set pro-

gram.

To activate the set program again, you must reset the watering time to the time originally set.

Bad-weather function (OFF): On rainy days the programmed watering cycle is often unneces- sary. You can therefore stop the programmed watering cycle

(bad-weather function).

The program you have set remains unchanged.

v Turn the control knob to OFF.

The valve closes and remains closed, independent of the watering cycle you have set.

To reactivate the set program, you must first reset the watering time.

11