ASSEMBLY
Assembly is easy and requires no tools.
●1 Position the lower stem (the straight tube) with the silver button toward the back. Using the bolt and knurled knob, attach the search coil to the 
plastic extension protruding 
from the lower stem. 
●2 Press the button on the upper end of the lower stem, and slide the lower stem into the upper stem.
Adjust the stem to a length that lets you maintain a
comfortable upright posture, with your arm relaxed at your side, and the search coil parallel to the ground in front of you.
●3 Wind the cable securely around the stem.
●4 Insert the plug into the matching connector on the right underside of the detector body. Be sure that the
Caution: Do not force the plug in. Excess force will cause damage. To disconnect the cable, pull on the plug.
Do not pull on the cable.
4