Gardena Art. 1559 manual Function, Initial Operation, Information about usage, Control panel

Page 3

GB

Information about usage:

The large-area pop-up irrigation should not be combined with other sprinklers in one irrigation line.

If there is a change in the range of the large- area pop-up irrigation, the pressure conditions will change in the irrigation line, so altering the range of the other sprinkler.

Only use separate individual water channels for watering. Do not install in series with other sprinklers.

The ranges selected may vary with major fluctuations in pressure in the water pipe.

Pressure Tank Units (with pressure chamber) to supply water to the sprinkler are not recom- mended as they cause fluctuations in pressure with the switch-on / off pressure.

Sand and other abrasive substances in the water will result in faster wear and reduced output.

vWith water containing sand a Central Filter (e.g. GARDENA Central Filter Art. 1510) should be used.

Do not run over sprinklers installed level with ground with a lawn rake or aerator.

3. Function

Control panel:

2 4 3

1 6 5

4. Initial Operation

The GARDENA Large-Area Pop-up Irrigation AquaContour automatic can be used to water individual garden areas. A jet of water slowly turns in a circle to the end of the programmed sector, stops, and turns back again, altering the spray range depending on the ranges programmed. The control panel is used to programme the irrigation contour points.

1

Menu button:

Choose between programming mode (Set)

 

 

and operating mode (Auto).

2

“+” button:

Increases irrigation range.

3

“-” button:

Decreases irrigation range.

4

OK button:

Stores the irrigation range selected.

5

Set LED:

Indicates programming mode.

6

Auto LED:

Indicates automatic operating mode.

 

 

The LED flashes every 10 seconds.

Select correct location for Large-Area Pop-Up

Correct location:

A Circle water distribution:

With circle water distribution the large-area pop-up irrigation should be positioned as centrally as possible in the watering area to ensure that the irrigation width is not greatly affected by external influences such as wind.

B Sector water distribution:

With sector water distribution the large-area pop-up irrigation should be positioned right at the edge of the watering area (e.g. at the corner of the house).

The large-area pop-up irrigation must be positioned at a point in the watering sector from which it is possible to water the entire garden area required. The maximum range is 9 m (with 2 bar flow pressure at the irrigation unit).

The large-area pop-up irrigation must be installed in a position which is sunny all year round to ensure the solar cell receives sufficient light.

12

Image 3
Contents Gardena Rechargeable battery Where to use Your Gardena Large-Area Pop-Up IrrigationSafety instructions ContentsControl panel FunctionInitial Operation Information about usageSelect watering sector Re-adjust sectorOperation Incorrect locationInformation about programming Anti-vandal devicePutting into Storage MaintenanceClean nozzles Clean protective panel of solar cell TroubleshootingAccessories Technical data Service / WarrantyWarranty Responsabilità 2006 AquaContour1559 AutomaticAlbania

Art. 1559 specifications

The Gardena Art. 1559 is a versatile and essential gardening tool designed to enhance the experience of both amateur and professional gardeners. This product, known for its efficiency and reliability, has gained a significant following due to its innovative features and user-friendly design.

One of the standout characteristics of the Gardena Art. 1559 is its ergonomic construction. The tool boasts a comfortable grip that minimizes strain during prolonged use. This is particularly beneficial for gardeners who spend long hours tending to their plants. The handle is designed to provide maximum control, allowing for precise movement when trimming, shaping, or pruning plants.

In addition to its ergonomic design, the Gardena Art. 1559 incorporates advanced technologies that facilitate gardening tasks. One of these technologies is the integrated blade system, which ensures sharpness and durability. The blades are made from high-quality stainless steel, preventing rust while offering a clean cut to your plants. This feature not only helps in maintaining the health of your plants but also ensures a neat appearance in your garden.

Another notable technology integrated into the Gardena Art. 1559 is its adjustable length. This feature allows users to extend the tool to reach high branches or areas that are otherwise difficult to access without the need for a ladder. This adjustability enhances safety and efficiency, making it easier to accomplish various gardening tasks without additional assistance.

The Gardena Art. 1559 is also lightweight and easy to maneuver, making it suitable for users of all ages. Its compact design means that it can be stored easily in a shed or garage without taking up much space. Furthermore, the tool is easy to maintain, requiring minimal effort to keep it in top condition.

Overall, the Gardena Art. 1559 is a prime example of how thoughtful design and advanced technology come together to create a gardening tool that simplifies the tasks of pruning and trimming. Its ergonomic features, durable materials, and user-friendly functionalities make it an indispensable addition to any gardener's toolkit. Whether you are nurturing a small flower garden or managing a larger landscape, the Gardena Art. 1559 is equipped to help you achieve your gardening goals effectively.