Craftsman 917.371031 owner manual Lawn Mower, Drive Wheels

Page 14

LAWN MOWER

Always observe safety rules when per- forming any maintenance.

TIRES

•Keep tires free of gasoline, oil, or insect control chemicals which can harm rubber.

•Avoid stumps, stones, deep ruts, sharp objects and other hazards that may cause tire damage.

DRIVE WHEELS

Check rear drive wheels each time you mow to be sure they move freely. The wheels not turning freely means trash,

grass cuttings, etc., may be inside the drive wheel and dust cover area and must

be cleaned out to free drive wheels.

BLADE CARE

For best results, mower blade must be kept

sharp. Replace a bent or damaged blade. ,_, CAUTION: Use only a replacement

blade approved by the manufacturer of your mower. Using a blade not approved by the manufacturer of your mower is hazardous, could damage your mower and void your warranty.

TO REMOVE BLADE

1.Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

2.Turn lawn mower on its side. Make sure air filter and carburetor are up.

3.Use a wood block between blade and

mower housing to prevent blade from turning when removing blade bolt.

NOTE: Protect your hands with gloves and/or wrap blade with heavy cloth.

4.Remove blade bolt by turning counter- clockwise.

5.Remove blade and attaching hardware (bolt, lock washer, hardened washer).

TO REPLACE BLADE

1.Position blade on the blade adapter aligning the two (2) holes in the blade with the raised lugs on the adapter.

2.Be sure the trailing edge of blade (oppo- site sharp edge) is up toward the engine.

3.Install the blade bolt with the lock washer and hardened washer into blade adapter and crankshaft.

4.Use block of wood between blade and

lawn mower housing and tighten the blade bolt, turning clockwise.

•The recommended tightening torque is 35-40 ft. Ibs.

IMPORTANT: Blade bolt is heat treated. If bolt needs replacing, replace only with

approved bolt shown in the Repair Parts section of this manual.

Trailing

Blade adapter,

Lock- washer

Hardened Blade

Blade washer bolt

TO SHARPEN BLADE

NOTE: We do not recommend sharpening the blade - but if you do, be sure the blade is balanced. Care should be taken to keep the blade balanced.An unbalanced bladewill

cause eventual damage to mower or engine.

•The blade can be sharpened with a file or on a grinding wheel. Do not attempt to sharpen while on the mower.

•To check blade balance, drive a nail into a beam or wall. Leave about one inch of

the straight nail exposed. Place center hole of blade over the head of the nail.

If blade is balanced, it should remain in a horizontal position. If either end of the blade moves downward, sharpen the heavy end until the blade is balanced.

GRASS CATCHER

The grass catcher may be hosed with water, but must be dry when used. Check your grass catcher often for dam- age or deterioration. Through normal use it will wear. If catcher needs replac- ing, replace only with approved replace- ment catcher shown in the Repair Parts section of this manual. Give the lawn mower model number when ordering.

GEAR CASE

•To keep your drive system working properly, the gear case and area around the drive should be kept clean and free of trash build-up. Clean under the drive cover twice a season.

•The gear case is filled with lubricant to the proper level at the factory. The only time the lubricant needs attention is if service

has been performed on the gear case.

•If lubricant is required, use only Texaco Starplex Premium 1 Grease, Part No. 750369. Do not substitute.

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Craftsman Yearfull Warranty on Craftsman Lawn Mower Your Safety is InvolvedGeneral Operation Do notGeneral Service RC12YXLawn Mower Maintenance Lawn Mower PerformanceTo Remove Lawn Mower from Carton To Unfold HandleTo Prepare Battery To Install AttachmentsWithout OIL or Gasoline Meets Cpsc Safety RequirementsKnow Your Lawn Mower Engine Speed To Adjust Cutting HeightDrive Control Adjustment Engine Zone ControlFor Side Discharging Side DischargingFor Rear Bagging ADD Gasoline ADD OILMowing Tips To Stop EngineTo Start Engine Lubrication General RecommendationsBefore Each USE Before After EveryLawn Mower Drive WheelsTo Change Engine OIL CleaningEngine AIR FilterLawn Mower To Adjust Cutting Height Water Washout FeatureClean Under Drive Cover Rear DeflectorDrive Cable Housing Anchor Holeff--3 To Replace Drive BeltTo Adjust Handle CarburetorFold HandleFuel System StorageCylinder BatteryEngine OIL OtherNeed More HELP? ProblemcauseCorrection Sears, Roebuck and Co., Hoffman Estates, IL Hacer OperacionIII. Ninos No HacerSAE RC12YXRendimiento DE LA Segadora Mantenimiento DE LA SegadoraPosicion Como Preparar SU SegadoraPara Remover LA Segadora DE LA Caja DE Carton ParaPara Instalar LOS Accesorios Producto. Aprenda y comprenda sus significados Cumple CON LOS Requisitos DE Seguridad DE LA CpscComo Usar SU Segadora Para Descarga Lateral Segadoras CON Descarga LateralPara Ensacamiento Trasero Antes DE Hacer Arrancar EL Motor ImportanteOnsejos Para Segar Para Parar EL MotorPara Hacer Arrancar EL Motor Consejos Para Segar Y ACOL- CharLubricacion Recomendaciones GeneralesAntes DE Cada USO Tabla DE LubricacionSegadora Para Cambiar EL Aceite DEL Motor LimpiezaMotor LUBRICACI6N Filtro DE AireSegadora Para Ajustar LA Altura DE Corte Derrubio DEL AguaLimpie Debajo DE LA Cubierta DE LA Impulsion Para Remover LA Correa DE IMPUL- SionPara Cambiar LA Correa DE IMPUL= SlONMotor CarburadorAceite DEL Motor MotorMango CilindroProblema Causa OtrosProblema CausaCraftsman Rotary Lawn Mower - Model Number Part KEY Part NO. noKEY SAE 30WCraftsman Rotary Lawn Mower - Model Number Craftsman Rotary Lawn MOWER- Model Number 917o371031 KEY Part DescriptionBriggs & Stratton 4-CYCLE Engine Model Number 11Pg05-1267=B1Model Number 11Pg05-1267-B1 Briggs & Stratton 4-CYCLE Engine Model Number 11 P905=I267=B1 KEY Part Description DESCRiPTiON Serifs

917.371031 specifications

The Craftsman 917.371031 is a versatile lawn tractor designed to meet the demands of homeowners seeking a reliable and efficient lawn care solution. Specifically engineered for both precision and durability, this model is equipped with various features that enhance user experience and performance, allowing users to maintain their lawns with ease.

One of the standout features of the Craftsman 917.371031 is its powerful engine. The tractor is equipped with a robust 20 HP Briggs & Stratton engine, which provides ample power for tackling tough mowing tasks. This engine is known for its longevity and dependable performance, ensuring that users can count on it to start easily and run smoothly even in challenging conditions.

The cutting deck of the Craftsman 917.371031 features a 42-inch design, perfectly sized for maneuvering through residential yards while providing an efficient cutting path. The deck is constructed from high-quality, durable materials that offer superior resistance to wear, further enhancing the longevity of the mower. Additionally, the mowing height can be easily adjusted with a simple lever, allowing users to achieve their desired grass length quickly.

In terms of technology, features like the electric start engine simplify the startup process, eliminating the need for cumbersome pull cords. The integrated hydrostatic transmission provides seamless speed control, enabling the operator to navigate various terrains with ease. This feature allows for both forward and reverse motion without the need for clutching or shifting gears, providing a smoother driving experience.

Comfort is also a priority in the Craftsman 917.371031. It includes a comfortable, high-back seat that provides support during longer mowing sessions, minimizing fatigue and ensuring a more enjoyable experience. The ergonomic steering wheel design allows for easier maneuverability, making it simple to navigate tight corners or intricate landscaping.

Another notable characteristic of this lawn tractor is its user-friendly dashboard. Equipped with clear gauges, users can easily monitor speed, fuel level, and maintenance indicators, ensuring that they can keep the tractor in optimal condition. Safety features, including blade brake and while disengaged, ensure that the tractor operates reliably and safely.

Overall, the Craftsman 917.371031 provides an exceptional lawn care experience with its powerful engine, durable cutting deck, and user-friendly technologies, making it a worthy investment for any homeowner looking to keep their yard in pristine condition.
Top Page Image Contents