Craftsman 917.371030 owner manual Water Washout Feature, Clean Under Drive Cover, Rear Deflector

Page 16

_I,CAUTION: Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

•Clean the underside of your lawn mower

by scraping to remove build-up of grass and trash.

•Clean engine often to keep trash from accumulating. A clogged engine runs hotter and shortens engine life.

•Keep finished surfaces and wheels free of al! gasoline, oil, etc.

•We do not recommend using a garden hose to clean lawn mower unless the electrical

system, muffler, air filter and carburetor are covered to keep water out. Water in engine can result in shortened engine life.

WATER WASHOUT FEATURE

Your lawn mower is equipped with a fitting that allows quick and easy cleaning of the underside of the housing. To use this feature, proceed as follows:

1. Move lawn mower to an area of cut grass or another hard surface.

NOTE: Water, grass and other debris will drain from beneath the mower housing during the washout process.

2.Remove grass catcher and discharge chute assembly from lawn mower.

3.Close mulcher door (if equipped).

4.Connect a garden hose to the fitting where shown.

IMPORTANT: Be sure the garden hose is not routed under the lawn mower housing or entangled in the wheels.

5.Turn on water supply and check for leaks at the fitting.

If no leaks are present, start engine (as described in the Operation section of this manual) and let engine run until the under- side of the lawn mower is clean.

,i& WARNING: Do not engage the drive system during the washout process.

6.Shut off the engine.

7.Shut off water supply and remove hose

from fitting.

CAUTION: Do not remove hose from

fitting while engine is running. Water in engine can result in shortened engine life.

8.Start engine (as described in the Op- eration section of this manual) and let

engine run for a full minute to remove excess water from mower.

Hose

Fitting

CLEAN UNDER DRIVE COVER

Clean under drive cover at least twice a season. Scrape underside of cover with putty knife or similar tool to remove any

build-up of trash or grass on underside of drive cover.

WARNING: To avoid serious injury, before performing any service and adjustments:

1.Release control bar and stop engine.

2.Make sure the blade and all moving parts have completely stopped.

3.Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

LAWN MOWER

TO ADJUST CUTTING HEIGHT

See "TO ADJUST CUTTING HEIGHT" in the Operation section of this manual.

REAR DEFLECTOR

The rear deflector, attached between the rear wheels of your mower, is provided to minimize the possibility that objects will be thrown out of the rear of the mower into the operator mowing position. If deflector becomes damaged, it should be replaced.

TO REMOVE DRIVE BELT

1.Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

2.Remove screws retaining drive cover and remove drive cover from lawn

mower housing (See Figure A).

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Craftsman Yearfull Warranty on Craftsman Lawn Mower Your Safety is InvolvedGeneral Operation Do notGeneral Service RC12YXLawn Mower Maintenance Lawn Mower PerformanceTo Remove Lawn Mower from Carton To Unfold HandleTo Prepare Battery To Install AttachmentsKnow Your Lawn Mower Meets Cpsc Safety RequirementsWithout OIL or Gasoline To Adjust Cutting Height Drive Control AdjustmentEngine Speed Engine Zone ControlFor Rear Bagging Side DischargingFor Side Discharging ADD Gasoline ADD OILTo Start Engine To Stop EngineMowing Tips General Recommendations Before Each USELubrication Before After EveryLawn Mower Drive WheelsCleaning EngineTo Change Engine OIL AIR FilterWater Washout Feature Clean Under Drive CoverLawn Mower To Adjust Cutting Height Rear DeflectorDrive Cable Housing Anchor Holeff--3 To Replace Drive BeltTo Adjust Handle CarburetorHandle Fuel SystemFold StorageBattery Engine OILCylinder OtherCorrection ProblemcauseNeed More HELP? Sears, Roebuck and Co., Hoffman Estates, IL Operacion III. NinosHacer No HacerSAE RC12YXRendimiento DE LA Segadora Mantenimiento DE LA SegadoraComo Preparar SU Segadora Para Remover LA Segadora DE LA Caja DE CartonPosicion ParaPara Instalar LOS Accesorios Producto. Aprenda y comprenda sus significados Cumple CON LOS Requisitos DE Seguridad DE LA CpscComo Usar SU Segadora Para Ensacamiento Trasero Segadoras CON Descarga LateralPara Descarga Lateral Antes DE Hacer Arrancar EL Motor ImportantePara Parar EL Motor Para Hacer Arrancar EL MotorOnsejos Para Segar Consejos Para Segar Y ACOL- CharRecomendaciones Generales Antes DE Cada USOLubricacion Tabla DE LubricacionSegadora Limpieza Motor LUBRICACI6NPara Cambiar EL Aceite DEL Motor Filtro DE AireDerrubio DEL Agua Limpie Debajo DE LA Cubierta DE LA ImpulsionSegadora Para Ajustar LA Altura DE Corte Para Remover LA Correa DE IMPUL- SionPara Cambiar LA Correa DE IMPUL= SlONMotor CarburadorMotor MangoAceite DEL Motor CilindroProblema Causa OtrosProblema CausaCraftsman Rotary Lawn Mower - Model Number KEY Part NO. no KEYPart SAE 30WCraftsman Rotary Lawn Mower - Model Number Craftsman Rotary Lawn MOWER- Model Number 917o371030 KEY Part DescriptionBriggs & Stratton 4-CYCLE Engine Model Number 11Pg05-1267=B1Model Number 11Pg05-1267-B1 Briggs & Stratton 4-CYCLE Engine Model Number 11 P905=I267=B1 KEY Part Description DESCRiPTiON Serifs

917.371030 specifications

The Craftsman 917.371030 is a reliable and robust lawn tractor designed for homeowners with medium to large yards. Known for its durability and performance, this tractor combines power and ease of use, making it an excellent choice for lawn maintenance tasks. With its powerful engine and versatile features, the Craftsman 917.371030 stands out among its competitors.

One of the main features of the Craftsman 917.371030 is its 24 HP Briggs & Stratton engine. This powerful engine provides ample torque and speed, making mowing through thick grass or uneven terrain efficient. The automatic transmission allows for seamless speed transitions, ensuring that users can easily navigate through their yards without the hassle of manually shifting gears.

The tractor is equipped with a 42-inch cutting deck, which enables a wide cutting path for faster mowing. The deck's design also features a three-blade system, resulting in a quality cut and making it easy to mulch or discharge grass clippings. With adjustable cutting heights, users can customize their lawn’s appearance to their preferences, achieving a beautifully manicured look.

In terms of technology, the Craftsman 917.371030 features a comfortable operator station. The seat is ergonomically designed with an adjustable back, providing maximum comfort during extended mowing sessions. The easy-access controls allow the operator to maneuver the lawn tractor effortlessly, while a clear dashboard display shows important information such as fuel levels and speed.

Safety is paramount, and the Craftsman 917.371030 includes important safety features, such as a brake that automatically engages when the operator leaves the seat and a durable frame that can withstand tough conditions. The tractor also has a tight turning radius, allowing for easy navigation around obstacles like trees and flower beds.

Maintenance is made simple with the Craftsman 917.371030, as it comes equipped with an easy-to-clean deck and convenient access to the engine for routine checks. Built to last, the durable construction materials and quality engineering ensure that this lawn tractor can withstand the demands of mowing season after season.

In summary, the Craftsman 917.371030 is an excellent lawn tractor that offers a combination of power, versatility, and comfort, making it a perfect choice for homeowners looking to maintain their lawns effectively. With its impressive cutting capabilities, user-friendly features, and commitment to safety, it remains a popular option in the lawn care community.
Top Page Image Contents