Assembly/Pre-Operation

Your new tractor has been assembled at the factory with the exception of those parts left unassembled for shipping purposes. To ensure safe and proper operation of your tractor all parts and hardware you assemble must be tightened securely. Use the correct tools as necessary to insure proper tightness.

TOOLS REQUIRED FOR ASSEMBLY

A socket wrench set will make assembly easier. Standard wrench sizes you need are listed below.

(1)	3/4" wrench	(1)	Pliers
(1)	1/2" wrench	(1)	Utility knife
(1)	Tire pressure	gauge

When right or left hand is mentioned in this manual, it means, from your point of view, when you are in the operating posi- tion (seated behind the steering wheel).

TO REMOVE TRACTOR FROM CARTON

UNPACK CARTON

1.Remove all accessible loose parts and parts boxes from carton.

2.Cut along dotted lines on all four pan- els of carton. Remove end panels and lay side panels ﬂ at.

3.Check for any additional loose parts or cartons and remove.

BEFORE REMOVING TRACTOR FROM SKID

ATTACH STEERING WHEEL

ASSEMBLE EXTENSION SHAFT AND BOOT

1.Slide extension shaft onto lower steer- ing shaft.

2.Place tabs of steering boot over tab slots in dash and push down to secure.

INSTALL STEERING WHEEL

3.Position front wheels of the tractor so they are pointing straight forward.

4.Remove steering wheel adapter from steering wheel and slide adapter onto steering shaft extension.

5.Position steering wheel so cross bars are horizontal (left to right) and slide inside boot and onto adapter.

6.Assemble large ﬂat washer, 5/16 lock washer, 5/16 hex bolt and tighten securely.

7.Snap steering wheel insert into center of steering wheel.

8.Remove protective materials from trac- tor hood and grill.

	Insert
	5/16 Hex Bolt
	5/16 Lock Washer
	Large Flat
	Washer
Steering	Steering
Wheel	Boot
	Tabs
Adapter	Extension
	Extension
	Shaft
Lower
Steering
Shaft
	Tab
	Slots

IMPORTANT: Check for and remove any staples in skid that may puncture tires where tractor is to roll off skid.

INSTALL SEAT

Adjust seat before tightening adjustment knob.

1.Remove adjustment knob and ﬂ at washer securing seat to cardboard packing and set aside for assembly of seat to tractor.

2.Pivot seat upward and remove from the cardboard packing. Remove the cardboard packing and discard.

3.Place seat on seat pan so head of shoulder bolt is positioned over large slotted hole in pan.

4.Push down on seat to engage shoulder bolt in slot and pull seat towards rear of tractor.

5.Pivot seat and pan forward and as- semble adjustment knob and ﬂ at washer loosely. Do not tighten.

917.27582 specifications

The Craftsman 917.27582 is a standout machine in the realm of lawn tractors, known for its reliability and robust performance. This model is particularly favored by homeowners looking for a powerful, efficient, and user-friendly solution for lawn care, capable of handling a variety of landscaping tasks with ease.

One of the defining features of the Craftsman 917.27582 is its powerful engine. Equipped with a 19.5 horsepower Briggs & Stratton engine, it delivers reliable power that facilitates optimal cutting performance, making it suitable for tackling medium to large-sized lawns. The automatic transmission allows for smooth and effortless operation, enabling users to navigate through various terrains without the hassle of manual shifting.

The cutting deck of the Craftsman 917.27582 is another highlight, featuring a durable 42-inch deck width. This size not only allows for efficient mowing but also ensures that larger areas can be covered in less time. The deck is designed with a sturdy construction that withstands wear and tear, making it ideal for regular use. Additionally, the deck's six different cutting height adjustments permit customization based on the type of grass and current weather conditions, allowing users to achieve a tailored lawn care routine.

Comfort and ease of use are at the forefront of the Craftsman 917.27582's design. The oversized high-back seat provides ample cushioning and support, perfect for those extended mowing sessions. The user-friendly controls are intuitively placed, making it straightforward for operators to adjust settings without distraction.

Another notable characteristic is the integrated mulching capability, allowing users to maintain a healthy lawn by returning nutrients back into the soil. This feature minimizes lawn waste while promoting vigorous grass growth, a boon for eco-conscious gardeners.

The Craftsman 917.27582 also boasts functional storage options and a tiller attachment, enhancing its versatility. With its combination of powerful performance, user-centric design, and innovative features, the Craftsman 917.27582 stands out as a top contender for those seeking a dependable lawn tractor that simplifies lawn maintenance while delivering exceptional results. Its blend of technology and practicality caters to both novice users and experienced landscapers alike, making it a wise investment for any home.