To Start Engine, Purge Transmission | Craftsman 917.27582 instruction

TO START ENGINE

When starting the engine for the first time or if the engine has run out of fuel, it will take extra cranking time to move fuel from the tank to the engine.

1.Be sure freewheel control is in the transmission engaged position.

2.Sit on seat in operating position, depress clutch/brake pedal and set parking brake.

3.Place motion control lever in neutral

(N)position.

4.Move attachment clutch to disengaged position.

5.Move throttle control to choke position. NOTE: Before starting, read the warm and cold starting procedures below.

6.Insert key into ignition and turn key clockwise to start position and release key as soon as engine starts. Do

not run starter continuously for more than fifteen seconds per minute. If the engine does not start after several attempts, move throttle control to fast position, wait a few minutes and try

again. If engine still does not start, move the throttle control back to the

choke position and retry.

WARM WEATHER STARTING (50 ° F and above)

7.When engine starts, move the throttle control to the fast position.

•The attachments and ground drive can now be used. If the engine does not accept the load, restart the engine and

allow it to warm up for one minute using the choke as described above.

COLD WEATHER STARTING ( 50 ° F and below)

7.When engine starts, allow engine

to run with the throttle control in the choke position until the engine runs roughly, then move throttle control to fast position. This may require an engine warm-up period from several seconds to several minutes, depending on the temperature.

AUTOMATIC TRANSMISSION WARM UP

Before driving the unit in cold weather,

the transmission should be warmed up as follows:

1.Be sure the tractor is on level ground.

2.Place the motion control lever in neutral. Release the parking brake and let the clutch/brake slowly return to operating position.

3.Allow one minute for transmission to warm up. This can be done during

the engine warm up period.

• The attachments can also be used dur- ing the engine warm-up period after the transmission has been warmed up.

NOTE: If at a high altitude (above 3000

feet) or in cold temperatures (below 32 F) the carburetor fuel mixture may need to be adjusted for best engine performance.

(See "TO ADJUST CARBURETOR" in the Service and Adjustments section of this manual.)

PURGE TRANSMISSION

To ensure proper operation and per-

formance, it is recommended that the transmission be purged before operating tractor for the first time. This procedure will remove any trapped air inside the trans- mission which may have developed during shipping of your tractor.

IMPORTANT: Should your transmission require removal for service or replace- ment, it should be purged after reinstall- ation before operating the tractor.

1.Place tractor safely in an area that is

flat for approximately 80 feet in front of the tractor and set the parking brake.

2.Sitting in the tractor seat, start engine. After the engine is running, move throttle control to slow position. With motion control lever in neutral (N) position, slowly disengage clutch/brake pedal.

3.Slowly move motion control lever to full forward position and hold for five

(5)seconds, or approximately 40 feet. Slowly move lever to full reverse posi-

tion and hold for five (5) seconds, or

approximately 20 feet. After the tractor

moves approximately 20 feet in reverse return the motion control lever to the

neutral (N) position. Repeat this proce- dure three (3) times.

Your transmission is now purged and now ready for normal operation.

917.27582 specifications

The Craftsman 917.27582 is a standout machine in the realm of lawn tractors, known for its reliability and robust performance. This model is particularly favored by homeowners looking for a powerful, efficient, and user-friendly solution for lawn care, capable of handling a variety of landscaping tasks with ease.

One of the defining features of the Craftsman 917.27582 is its powerful engine. Equipped with a 19.5 horsepower Briggs & Stratton engine, it delivers reliable power that facilitates optimal cutting performance, making it suitable for tackling medium to large-sized lawns. The automatic transmission allows for smooth and effortless operation, enabling users to navigate through various terrains without the hassle of manual shifting.

The cutting deck of the Craftsman 917.27582 is another highlight, featuring a durable 42-inch deck width. This size not only allows for efficient mowing but also ensures that larger areas can be covered in less time. The deck is designed with a sturdy construction that withstands wear and tear, making it ideal for regular use. Additionally, the deck's six different cutting height adjustments permit customization based on the type of grass and current weather conditions, allowing users to achieve a tailored lawn care routine.

Comfort and ease of use are at the forefront of the Craftsman 917.27582's design. The oversized high-back seat provides ample cushioning and support, perfect for those extended mowing sessions. The user-friendly controls are intuitively placed, making it straightforward for operators to adjust settings without distraction.

Another notable characteristic is the integrated mulching capability, allowing users to maintain a healthy lawn by returning nutrients back into the soil. This feature minimizes lawn waste while promoting vigorous grass growth, a boon for eco-conscious gardeners.

The Craftsman 917.27582 also boasts functional storage options and a tiller attachment, enhancing its versatility. With its combination of powerful performance, user-centric design, and innovative features, the Craftsman 917.27582 stands out as a top contender for those seeking a dependable lawn tractor that simplifies lawn maintenance while delivering exceptional results. Its blend of technology and practicality caters to both novice users and experienced landscapers alike, making it a wise investment for any home.