Parasound 275 V.2 manual Are You Having Difficulty?, Repair or Service

Page 14

Are You Having Difficulty?

Repair or Service

Call your Parasound dealer first. If the dealer can’t help you with your problem we encourage you to call Parasound’s Technical Service Department at 415 397 7100, Monday - Friday, 8am - 4pm Pacific Time. We can suggest other diagnostic tests you can easily perform.

If we determine that your Model 275 v.2 should be returned to Parasound or an Authorized Parasound Warranty Center for inspection and possible servicing, we will provide the location of a warranty center near you or shipping instructions for the unit’s return to Parasound.

Before You Return Any Unit to Parasound for Service

Before you send your unit to Parasound, you will need to obtain a specific Return Authorization (RA) number and shipping instructions from Parasound’s Technical Department. The RA number must be clearly marked on the outer carton. Use the original factory packing materials and arrange adequate insurance to cover its value. You must include a copy of your purchase receipt, since this document establishes the validity of this unit’s warranty. Warranty repairs are only performed by Parasound or Parasound Authorized warranty centers when your purchase receipt is from a Parasound Authorized Dealer or Parasound Authorized Reseller.

Shipments Will Be Refused by Parasound Under the Following Conditions:

1.Unit was sent without the Parasound-assigned RA number marked on the carton.

2.Unit was sent in an unsuitable shipping carton and packing inserts and is likely to have been damaged in transit.

3.Unit has inadequate packing materials and is likely to have been damaged in transit. Wrapping the Model 275 v.2 with bubble wrap will not protect it during shipment.

4.Unit was shipped collect for shipping charges. We do not accept collect shipments.

5.Unit was shipped via the US Postal Service.

6.Unit was sent to an address other than the address instructed by our Technical Department.

Warranty Repair

Please read your accompanying Parasound Limited Warranty carefully to understand the applicable rights and limitations. This section provides instructions for obtaining repairs, both for units covered under the Parasound Limited Warranty and for units or situations which are outside the Warranty. The complete warranty can be found at www.parasound.com.

Unit is not eligible for repair under the terms of the Parasound warranty if:

1.Unit was not purchased from a Parasound Authorized Dealer.

2.You do not have the original bill of sale or sales receipt from a Parasound Authorized Dealer.

3.You are not the original owner. The Parasound warranty is not transferable.

4.Unit’s serial number was removed, modified, or defaced.

5.Unit shows evidence of abuse and/or misuse.

6.Unit was modified in any way.

7.A prior repair was attempted by an unauthorized repair station.

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Model 275 Important Safety Instructions Table of Contents Parasound Staff Keeping Records for Future Reference Important Warranty informationThank You for Choosing Parasound Ventilation Requirements Placement GuidelinesUnpacking Your Model 275 AC Mains Voltage Rear Panel Connections and ControlsHigh Pass Filter Switch Front Panel Speaker Selector Lockout SwitchBridged Mono Switch Right and L Left Level KnobsBridged Mono Operation Speaker Wire Length and Gauge thicknessSetting Up the Model 275 v.2 for Bridged Mono Operation Speaker TerminalsTwo 8 Ohm Speakers Single 8 Ohm SpeakerSingle 4 or 6 Ohm Speaker Audio Position Automatic on/off Turn On Options SwitchManual Position 12V Position Automatic on/off5mm and 2.5mm trigger jacks Volt Input Jacks12V Loop Out Jack Front Panel Operation Unit Will Not Turn On Problems and RemediesAmp is Overheating or the Hi-Temp Indicator is Illuminated No Sound From the Speakers but amp turns onRepair or Service Are You Having Difficulty?Specifications Parasound Products, Inc McKinnon Ave, San Francisco, CA

275 V.2 specifications

The Parasound 275 V.2 is a powerful and versatile amplifier that stands out in the crowded landscape of audio equipment. Known for its robust construction and high-quality performance, it has become a favorite among audiophiles and home theater enthusiasts alike.

At the heart of the 275 V.2 is its impressive power output. Delivering 2 x 60 watts into 8 ohms and 2 x 90 watts into 4 ohms, this amplifier can easily drive a variety of speakers efficiently. This output is achieved with a toroidal transformer and high-capacity filter capacitance, ensuring a clean and dynamic sound. The amplifier's ability to provide high current allows it to maintain performance under demanding conditions, making it a reliable choice for both music and movie playback.

One of the standout features of the Parasound 275 V.2 is its use of high-quality components. The amplifier employs discrete, low-noise, high-speed transistors for an ultra-linear frequency response, resulting in low distortion across all frequencies. Additionally, it features a full complement of protection circuitry that shields the amplifier and connected speakers from potential damage, which is a crucial aspect of long-term reliability.

The design of the 275 V.2 also places a strong emphasis on versatility. It includes both unbalanced RCA inputs and balanced XLR inputs, allowing it to seamlessly integrate into a variety of audio systems. This flexibility is particularly beneficial for users with high-end source components that utilize balanced outputs.

User-friendly features like a 12V trigger input and output enable easy integration into automated systems, while the inclusion of a remote trigger output means the amplifier can work in conjunction with other powered devices. Furthermore, the amplifier has a front-panel power switch, which can be beneficial for quick access.

Aesthetically, the Parasound 275 V.2 is designed with a modern look, featuring a sleek chassis that is both durable and stylish. It also sports an elegant, minimalist front panel, which reflects the brand's commitment to quality.

In summary, the Parasound 275 V.2 is a high-performance amplifier that combines impressive power, superior build quality, and versatile connectivity options. Its innovative technologies and thoughtful engineering make it a top contender for anyone looking to elevate their audio experience, whether in a home theater or a dedicated listening room. With its balance of reliability and performance, the 275 V.2 is a commendable choice for discerning audio enthusiasts.
Top Page Image Contents