Craftsman 917.374150 owner manual General Operation, IV. Safe Handling of Gasoline, Do not

Page 3

I. GENERAL OPERATION

Read, understand, and follow all instructions on the machine and in the

manual(s) before starting. Be thoroughly familiar with the controls and the proper use of the machine before starting.

Do not put hands or feet near or under rotating parts. Keep clear of the dis- charge opening at all times.

Only allow responsible individuals, who are familiar with the instructions, to oper- ate the machine.

Clear the area of objects such as rocks, toys, wire, bones, sticks, etc., which could be picked up and thrown by blade.

Be sure the area is clear of other people

before mowing. Stop machine if anyone enters the area.

Do not operate the mower when bare- foot or wearing open sandals. Always wear substantial foot wear.

Do not pull mower backwards unless absolutely necessary. Always look down and behind before and while moving backwards.

Never direct discharged material toward anyone. Avoid discharging material against a wall or obstruction. Material may richochet back toward the opera-

tor. Stop the blade when crossing gravel surfaces.

Do not operate the mower without proper guards, plates, grass catcher or other safety protective devices in place.

See manufacturer's instructions for

proper operation and installation of accessories. Only use accessories ap- proved by the manufacturer.

Stop the blade(s) when crossing gravel drives, walks, or roads.

Stop the engine (motor) whenever you leave the equipment, before cleaning the mower or unclogging the chute.

Shut the engine (motor) off and wait until the blade comes to complete stop before removing grass catcher.

Mow only in daylight or good artificial light.

Do not operate the machine while under the influence of alcohol or drugs.

Never operate machine in wet grass.

Always be sure of your footing: keep a firm hold on the handle; walk, never run.

Disengage the self-propelled mech- anism or drive clutch on mowers so

equipped before starting the engine.

If the equipment should start to vibrate abnormally, stop the engine (motor) and check immediately for the cause. Vibra- tion is generally a warning of trouble.

. Always wear safety goggles or safety glasses with side shields when operating mower.

Ii. SLOPE OPERATION

Slopes are a major factor related to slip & fa!l accidents which can result in severe in-

jury. All slopes require extra caution. If you feel uneasy on a slope, do not mow it. DO:

Mow across the face of slopes: never up and down. Exercise extreme caution when changing direction on slopes.

Remove obstacles such as rocks, tree limbs, etc.

Watch for holes, ruts, or bumps. Tall grass can hide obstacles.

DO NOT:

Do not trim near drop-offs, ditches or embankments. The operator could lose footing or balance.

Do not trim excessively steep slopes.

Do not mow on wet grass. Reduced foot- ing could cause slipping.

Iii. CHILDREN

Tragic accidents can occur if the operator

is not alert to the presence of children. Children are often attracted to the machine

and the mowing activity. Never assume that children will remain where you last saw them.

Keep children out of the trimming area and under the watchful care of another

responsible adult.

Be alert and turn machine off if children enter the area.

Before and while walking backwards, look behind and down for small children.

Never allow children to operate the ma- chine.

Use extra care when approaching blind corners, shrubs, trees, or other objects that may obscure vision.

IV. SAFE HANDLING OF GASOLINE

Use extreme care in handling gasoline. Gasoline is extremely flammable and the vapors are explosive.

Extinguish all cigarettes, cigars, pipes and other sources of ignition.

Use only an approved container.

Never remove gas cap or add fuel with the engine running. Allow engine to cool before refueling.

Never refuel the machine indoors.

Never store the machine or fue! contain- er where there is an open flame, spark or pilot light such as a water heater or on other appliances.

3

Image 3
Contents Craftsman Your Safety is Involved Yearfull Warranty on Craftsman Lawn MowerGeneral Operation IV. Safe Handling of GasolineDo not 030 General ServiceLawn Mower Performance Lawn Mower MaintenanceTo Assemble Grass Catcher NOW to SET UP Your MowerTo Remove Mower from Carton To Unfold HandleKnow Your Lawn Mower Meets Cpsc Safety RequirementsHOW to USE Your Lawn Mower ADD OIL Before Starting EngineTo Empty Grass Catcher For Rear BaggingTo Start Engine To Stop EngineMowing Tips Mulching Mowing TipsLubrication Lubrication ChartGeneral Recommendations Before Each USEDrive Wheels Lawn MowerEngine To Clean AIR FilterGrass Catcher Gear CaseSpark Plug CleaningClean Under Drive Cover MufflerRear Deflector Lawn Mower To Adjust Cutting HeightTo Adjust Handle To Remove Drive BeltHandle EngineLawn Mower CarburetorEngine OIL Problem CauseOther Fuel SystemNeed More HELP? ProblemCause CorrectionSU Seguridad Esta Comprometida Sears, Roebuck and Co., Hoffman Estates, ILHacer OperacionIII. Ninos II. Operacion Sobre LAS CuestasSAE En elsuelolejosdesuvehiculoantesde IlenarMantenimiento DE LA Segadora Rendimiento DE LA SegadoraComo Preparar SU Segadora Producto. Aprenda y comprenda sus significados Velocidad DEL Motor Como Usar SU SegadoraImportante Antes DE Hacer Arrancar EL MotorPara Parar EL Motor Para Hacer Arrancar EL MotorConsejos Para Segar Y ACOL- Char Onsejos Para SegarTabla DE Lubricacion Recomendaciones GeneralesAntes DE Cada USO LubricacionSegadora Motor Lubricacion Limpie Debajo DE LA Cubierta DE LA IMPULSI6N LimpiezaPara Cambiar Correa DE IMPULSI6N Desviador TraseroPara Remover Correa DE Impulsion Para Ajustar EL MangoSegadora MotorVelocidad DEL Motor CarburadorProblema Causa CilindroOtros Causa ProblemaCraftsman Rotary Lawn MOWER- Model Number SAE 30W KEYPart DescriptionCraftsman Rotary Lawn MOWER- Model Number DESCRiPTiON 424919 Drive Control Assembly Includes Cable Briggs & Stratton 4-CYCLE Engine Operators Manual I 11329REPLACEMENTENGINE209,+Jf2o2 305 334 585 KEY Part Description Lever 957 796577 Serifs

917.374150, 37415 specifications

The Craftsman 37415,917.374150 is a versatile and robust power tool designed to meet the demands of both DIY enthusiasts and professional contractors. Renowned for its reliability and performance, this tool showcases several key features that set it apart in the crowded market of power tools.

At the forefront of the Craftsman 37415's appeal is its powerful motor, which delivers exceptional torque and speed. This ensures that tasks such as drilling, driving screws, or tackling tough materials are executed with ease and efficiency. The tool is equipped with variable speed settings, allowing users to adjust the RPM according to the specific application, providing maximum control over the operation.

One of the standout characteristics of the Craftsman 37415 is its durable construction. Built with quality materials, this power tool is designed to withstand the rigors of continuous use, making it an excellent choice for heavy-duty projects. Additionally, it features an ergonomic design, complete with a comfortable grip that reduces fatigue during extended use, making it user-friendly even in demanding situations.

Technologically, the Craftsman 37415 integrates advanced features that enhance performance. Its integrated LED work light illuminates the workspace, providing better visibility in low-light conditions, which is especially useful for intricate tasks. The tool also includes a built-in battery level indicator, ensuring that users can monitor power levels easily, thereby reducing downtime during projects.

Moreover, the Craftsman 37415 is compatible with a range of accessories and attachments, allowing for a multi-functional approach to various projects. This versatility means that it can handle different tasks, from woodworking to metalworking, with minimal effort.

In terms of safety, Craftsman does not compromise. The tool is designed with safety features such as a lock-off switch that prevents accidental starting and a robust housing that protects internal components from dust and debris.

In conclusion, the Craftsman 37415,917.374150 stands out as a powerful and adaptable tool ideal for a variety of applications. Its combination of strength, user-centric design, and durability makes it a reliable choice for anyone looking to invest in a high-quality power tool. Whether you're a seasoned professional or a weekend warrior, the Craftsman 37415 is equipped to tackle any challenge you throw its way.