To Remove Mower from Carton

Read these instructions and this manual in its entirety before you attempt to assemble or operate your new lawn mower.

IMPORTANT: This lawn mower is shipped WITHOUT OIL OR GASOLINE in the engine.

Your new lawn mower has been assembled at the factory with the exception of those parts left unassembled for shipping purposes. To ensure safe and proper operation of your lawn mower, all parts and hardware you assemble must be tightened securely. Use the correct tools as necessary to ensure proper tightness. All parts such as nuts, washers, bolts, etc., necessary to complete the assembly have been placed in the parts bag.

1.Remove loose parts included with mower.

2.Cut down two end corners of carton and lay end panel down flat.

3.Remove all packing materials except padding between upper and lower

handle and padding holding operator presence control bar to upper handle.

4.Roll lawn mower out of carton and check carton thoroughly for additional loose parts.

TO ASSEMBLE GRASS CATCHER

1.Put grass catcher frame into grass bag

with rigid part of bag on the bottom. Make sure the frame handle is outside

of the bag top.

2.Slip vinyl bindings over frame.

NOTE: If vinyl bindings are too stiff, hold them in warm water for a few minutes. If

bag gets wet, let it dry before using.

HOW TO SET UP YOUR MOWER

TO UNFOLD HANDLE

IMPORTANT: Unfold handle carefully so as not to pinch or damage control cables.

I.Raise handles until lower handle sec-

tion locks into place in mowing position.

2.Remove protective padding, raise up- per handle section into place on lower handle and tighten both handle knobs.

3.Remove handle padding holding operator presence control bar to upper handle.

Your lawn mower handle can be adjusted for your mowing comfort. Refer to "AD-

JUST HANDLE" in the Service and Adjust- ments section of this manual.

Operator	MOWING
I:	POSITION
control bar

Vinyl	Frame
bindings	opening

TO INSTALL ATTACHMENTS

Your lawn mower was shipped ready to be used as a mulcher. To convert mower to

bagging or discharging, see "TO CON-

VERT MOWER" in the Operation section of this manual.

Upper

UPhandle

Handle knob

Lower handle

917.376671 specifications

The Craftsman 917.376671 is a robust and reliable lawn mower designed for homeowners seeking an efficient solution for their yard maintenance needs. Renowned for its durability and performance, this model blends innovative technology with user-friendly features, making it a popular choice among gardening enthusiasts.

One of the standout features of the Craftsman 917.376671 is its powerful engine. Equipped with a dependable 163cc gas engine, this mower delivers the reliability needed for various mowing conditions. The engine is designed to provide sufficient torque, enabling the mower to tackle thick and tall grass with ease. Its pull-start mechanism ensures that starting the mower is straightforward and hassle-free, even for those who may be less experienced with lawn care tools.

The cutting deck is another highlight of this model. With a 21-inch steel deck, it offers a perfect balance of maneuverability and cutting capacity. The deck's construction ensures resilience against the wear and tear of regular use, while also providing an optimal cutting performance. Furthermore, the Craftsman 917.376671 features a superior 3-in-1 cutting system, allowing users to mulch, bag, or side discharge grass clippings as per their preference. This versatility enhances the mower's functionality, enabling a clean and tidy lawn finish.

In terms of user comfort and convenience, the Craftsman 917.376671 boasts adjustable cutting heights. With six different height settings ranging from 1.25 inches to 3.75 inches, users can easily customize the grass length to their liking. This feature not only aids in achieving the desired lawn aesthetic but also promotes healthier grass growth by allowing for better sunlight exposure.

The mower's lightweight design makes it easy to maneuver around corners and tight spaces in a yard. Additionally, the 917.376671 is equipped with durable rear wheels, enhancing traction and control on various terrains, which is particularly beneficial when mowing hilly or uneven landscapes.

Another significant aspect of this mower is its easy-to-access controls. Operators will appreciate the ergonomic handle design, which promotes comfort during extended use. The folding handle feature also simplifies storage and transport, making it easy to fit in smaller garages or sheds.

In summary, the Craftsman 917.376671 lawn mower combines power, versatility, and user-friendly design. With its strong engine, durable cutting deck, multiple cutting height settings, and convenient controls, this model serves as an excellent choice for homeowners looking to achieve a well-manicured lawn without excessive effort. Whether tackling a small backyard or a larger landscape, the Craftsman 917.376671 delivers consistent performance for all mowing tasks.