Craftsman 917.37658 owner manual Engine, Cleaning, AIR Filter, Muffler, Spark Plug

Page 14

ENGINE

LUBRICATION

Use only high quality detergent oil rated with API service classification SG–SL. Select the oil's SAE viscosity grade according to your expected operating temperature.

SAE VISCOSITY GRADES

 

 

 

 

 

 

 

 

 

 

SAE 30

 

 

 

 

 

 

5W-30

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

F

-20

0

 

 

30 32 40

 

60

80

100

C

-30

-20

-10

0

10

20

30

40

TEMPERATURE RANGE ANTICIPATED BEFORE NEXT OIL CHANGE

NOTE: Although multi-viscosity oils (5W30, 10W30 etc.) improve starting in cold weather, these multi-viscosity oils will result in increased oil consumption when used above 32°F. Check your engine oil level more frequently to avoid possible engine damage from running low on oil. Change the oil after every 25 hours of op- eration orat least once a year if the mower is not used for 25 hours in one year. Check the crankcase oil level before starting the engine and after each fi ve (5) hours of continuous use. Tighten oil plug securely each time you check the oil level.

TO CHANGE ENGINE OIL

NOTE: Before tipping lawn mower to drain oil, empty fuel tank by running engine until fuel tank is empty.

1.Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

2.Remove engine oil cap; lay aside on a clean surface.

3.Tip lawn mower on its side as shown and drain oil into a suitable container. Rock lawn mower back and forth to re- move any oil trapped inside of engine.

7.Continue adding small amounts of oil, rechecking the dipstick until oil level settles at FULL. DO NOT overfi ll, or engine will smoke heavily from the muffl er on startup.

8.Always be sure to retighten oil dipstick before starting engine.

9.Reconnect spark plug wire to spark plug.

AIR FILTER

Your engine will not run properly and may be damaged by using a dirty air

filter. Replace the air fi lter cartridge every 100 hours of operation or every season, whichever occurs fi rst. Service air cleaner more often under dusty conditions.

TO CLEAN AIR FILTER

1.Loosen screw and tilt cover to remove.

2.Carefully remove cartridge.

3.Clean by gently tapping on a flat sur-

face. If very dirty, replace cartridge. CAUTION: Petroleum solvents, such as kerosene, are not to be used to clean cartridge. They may cause deterioration of the cartridge. Do not oil cartridge. Do not use pressurized air to clean or dry cartridge.

4.Install cartridge, then replace cover making sure the tabs are aligned with the slots in the back plate. Fasten screw securely.

Back plate

Slots

Lip

Cover

Cartridge Cover tabs

Container

4.Wipe off any spilled oil from lawn mower or side of engine.

5.Slowly pour oil down the oil fi ll spout, stopping every few ounces to check the oil level with the dipstick.

6.Stop adding oil when you reach the

FULL mark on the dipstick. Wait a

14

minute to allow oil to settle.

MUFFLER

Inspect and replace corroded muffler as it could create a fi re hazard and/or damage.

SPARK PLUG

Replace spark plug at the beginning of each mowing season or after every 100 hours of operation, whichever occurs

first. Spark plug type and gap setting are shown in the “PRODUCT SPECIFIC- ATIONS” section of this manual.

CLEANING

IMPORTANT: For best performance, keep mower housing free of built-grass and trash. Clean the underside of your mower after each use.

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Rotary Lawn Mower Safety Rules Table of ContentsWarranty III. Children General OperationII. Slope Operation IV. Safe Handling of GasolineProduct Specifications General ServiceAccessories Repair Protection AgreementsTo Remove Mower from Carton Assembly / PRE-OPERATIONHOW to SET UP Your Mower Know Your Lawn Mower Meets Cpsc Safety RequirementsOperation HOW to USE Your Lawn Mower Simple Steps to Remember When Converting Your Lawn Mower To Convert MowerADD OIL Before Starting EngineTo Empty Grass Catcher Attach Fuel CAP CartridgeMowing Tips To Stop EngineTo Start Engine Mulching Mowing TipsGeneral Recommendations MaintenanceLubrication Chart Before Each USELawn Mower AIR Filter CleaningEngine MufflerService and Adjustments Handle StorageCarburetor Fuel System Problem Cause CorrectionOther Engine OILPoor cut Page Get it fixed, at your home or ours

917.37658 specifications

The Craftsman 917.37658 is a robust and highly efficient lawn mower designed to cater to the needs of homeowners who seek a reliable and powerful machine for maintaining their yards. This model is particularly well-regarded for its user-friendly features and advanced technologies, making it suitable for both novice and experienced users.

One of the standout features of the Craftsman 917.37658 is its powerful engine. Equipped with a reliable Briggs & Stratton engine, this mower ensures consistent performance and durability, even when tackling tougher mowing conditions. The engine offers ample horsepower, enabling it to handle a variety of grass types, including those in challenging terrains.

Another notable characteristic of this mower is its 21-inch cutting deck, which allows for a wide cutting path. This feature optimizes mowing efficiency, as it requires fewer passes to cover a given area. Additionally, the cutting height is adjustable, giving users the flexibility to set the blade to the preferred height. Whether trimming grass for aesthetic purposes or scalping for a fresh start, the Craftsman 917.37658 can accommodate diverse mowing preferences.

The mower is also engineered with a rear-wheel drive system that enhances maneuverability. This makes it easier to navigate around obstacles like trees and flower beds while providing better traction on uneven surfaces. The comfortable handle design further improves the mowing experience, with options for height adjustment to suit users of different statures.

A key feature of the Craftsman 917.37658 is its versatility in cutting options. This model supports both side discharge and mulching capabilities, allowing users to choose how they want to manage grass clippings. The mulching feature is especially useful for those looking to recycle clippings back into the lawn, promoting healthier grass growth and reducing the need for additional fertilizer.

Safety is another priority in the design of the Craftsman 917.37658. It comes with a safety key, which prevents the engine from starting unless it is engaged, ensuring that users can operate the mower without unnecessary risks.

In summary, the Craftsman 917.37658 is a well-rounded lawn mower that combines power, efficiency, and user-friendly features. With its robust engine, adjustable cutting heights, versatile options, and focus on safety, this mower is a great choice for anyone looking to achieve a well-manicured lawn with ease. Whether you're tackling a small patch of grass or a larger yard, the Craftsman 917.37658 is designed to meet your mowing needs effectively.
Top Page Image Contents