Craftsman 917.374062 manual HOW to USE Your Lawn Mower

Page 9

The operation of any lawn SAFETVG'ASSESmower can result in foreign

objects thrown into the eyes, which can result in severe

eye damage. Always wear safety glasses or eye shields while oper- ating your lawn mower or performing any adjustments or repairs. We recommend a standard safety glasses orwide vision safety mask worn over spectacles.

HOW TO USE YOUR LAWN MOWER

ENGINE SPEED

Engine speed was set at the factory for optimum performance. It is not adjustable.

ENGINE ZONE CONTROL

_i, CAUTION: Federal regulations require

an engine control to be installed on this lawn mower in order to minimize the risk

of blade contact injury. Do not under

any circumstances attempt to defeat the function of the operator control. The blade turns when the engine is running.

•Your lawn mower is equipped with an operator presence control bar which

requires the operator to be positioned behind the lawn mower handle to start

and operate the lawn mower.

DRIVE CONTROL

. Self-propelling is controlled by holding the operator presence control bar down

to the handle and pulling either drive control lever rearward to the handle.

The further toward the handle a lever is pulled, the faster the unit will travel.

•Forward motion will stop when either the operator presence control bar or a drive control lever are released. To stop forward motion without stopping engine, release a drive control lever only. Hold operator presence control bar down against handle to continue mowing

without self-propelling.

NOTE: If after releasing the drive control the mower will not roll backwards, push the mower forward slightly to disengage drive wheels.

•To keep drive control engaged when turning corners, push down on the handle to lift the front wheels off the ground while turning lawn mower.

Operator presence control bar

control levers

TO ENGAGE DRIVE CONTROL

DRIVE CONTROL DISENGAGED

DRIVE CONTROL ADJUSTMENT

Over time, the drive control system may become "loose", resulting in decreased speed. There is a turnbuckle on the drive control housing to increase tension on the drive cable. Proceed as follows:

1.Turn unit off and disconnect spark plug wire from spark plug.

2.Rotate turnbuckle on drive control to increase drive speed.

3.Operate mower to test drive speed. Readjust as required.

4.If condition fails to improve after the above steps (forward speed remains the same), your drive belt is worn and should be replaced.

Adjustment turnbuckle

TO ADJUST CUTTING HEIGHT

Raise wheels for low cut and lower wheels for high cut, adjust cutting height to suit

your requirements. Medium position is best for most lawns.

•To change cutting height, pull up on adjuster lever, move wheel up or down

to suit your requirements and release adjuster lever. Be sure all wheels are in the same setting.

NOTE: Adjuster is

properly

positioned

when lever inserts

into hole

in plate.

LEVER BACKWARD

 

 

TO LOWER MOWER

4

i

Plate

LEVER FORWARD

9 TO RAISE MOWER

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Craftsman Your Safety is Involved Yearfull Warranty on Craftsman Lawn MowerGeneral Operation IV. Safe Handling of GasolineDo not RJ19HX General ServiceLawn Mower Performance Lawn Mower MaintenanceTo Unfold Handle To Remove Mower from CartonMowing PositionTo Prepare Battery To Install AttachmentsTo Assemble Grass Catcher Know Your Lawn Mower Meets Cpsc Safety RequirementsHOW to USE Your Lawn Mower Side Discharging Rear BaggingFor Rear Bagging To Convert MowerBefore Starting Engine Mowing Tips Mulching Mowing TipsBefore Each USE General RecommendationsLubrication Before After EveryDrive Wheels Lawn MowerGrass Catcher To Clean AIR FilterGear Case EngineClean Under Drive Cover CleaningMuffler Spark PlugTo Adjust Handle Lawn Mower To Adjust Cutting HeightTo Remove Drive Belt Rear DeflectorHandle CarburetorEngine Speed Forward for Storage Mowing PositionEngine BatteryOther Fuel SystemCause ProblemCorrection Need More HELP?SU Seguridad Esta Comprometida Sears, Roebuck and Co., Hoffman Estates, ILIII. Ninos OperacionII. Operacion Sobre LAS Cuestas HacerRJ19HX SAEMantenimiento DE LA Segadora Rendimiento DE LA SegadoraPara Remover LA Segadora DE LA Caja DE Carton Como Preparar SU SegadoraPara Instalar LOS Accesorios Para Montar EL Recogedor DE CespedCumple CON LOS Requisitos DE Seguridad DE LA Cpsc Producto. Aprenda y comprenda sus significadosVelocidad DEL Motor Como Usar SU SegadoraSegadoras CON Descarga Trasera Para Convertir LA SegadoraSegadoras CON Descarga Lateral Para Ensacamiento TraseroAntes DE Hacer Arrancar EL Motor Para Parar EL MotorImportante Consejos Para Segar Y ACOL- Char Onsejos Para SegarAntes DE Cada USO Recomendaciones GeneralesLubricacion Tabla DE LubricacionSegadora Motor Lubricacion Limpie Debajo DE LA Cubierta DE LA IMPULSI6N LimpiezaDesviador Trasero Para Ajustar LA Altura DE CortePara Remover Correa DE Impulsion Para Ajustar EL MangoVelocidad DEL Motor MotorCarburador SegadoraProblema CausaOtros Correccion ProblemaCraftsman Rotary Lawn Mower - Model Number NO. no KEY PartKEY Part DescriptionCraftsman Rotary Lawn Mower - Model Number KEY Part Description Craftsman Rotary Lawn Mower - Model Number 917o374062Briggs & Stratton 4-CYCLE Engine Ii562e188 Emissions Label Valve Gasket SET Oversize PTOPassage Blower Service Notes Service Notes Serifs

917.374062 specifications

The Craftsman 917.374062 is a versatile and robust lawn tractor that has gained favor among homeowners looking for a reliable machine to maintain their landscapes. This model combines performance reliability with user-friendly features, making it an ideal choice for those with medium to large-sized lawns.

One of the standout features of the Craftsman 917.374062 is its powerful engine. Equipped with a 19 horsepower Briggs & Stratton engine, it provides ample power for various mowing tasks. The engine is designed for efficiency, ensuring that users can tackle tough grass and uneven terrain without sacrificing performance. Its automatic transmission also allows for smooth shifts and easy operation, removing the need for manual gear changes and enhancing the user experience.

The cutting deck on the 917.374062 is another highlight. With a 42-inch cutting width, it allows for efficient mowing, reducing the number of passes required to cover large areas. The deck features a durable construction that is built to withstand the rigors of regular use, while the adjustable mowing heights provide versatility for different grass types and preferences.

In terms of technology, the Craftsman 917.374062 showcases an easy-to-use dashboard that includes essential indicators and controls, enabling operators to keep track of engine performance and make adjustments as needed without difficulty. The tractor includes a comfortable seat that provides support during extended mowing sessions, ensuring that users can operate it without experiencing fatigue.

Another commendable characteristic of this machine is its maneuverability. Designed with a tight turning radius, the Craftsman 917.374062 can easily navigate around obstacles, flower beds, and trees, making it suitable for yards with intricate landscaping. Additionally, its rugged tires provide optimal traction, enhancing stability on lawns that may be slightly uneven or hilly.

Maintaining the Craftsman 917.374062 is relatively easy, with accessible components designed for user convenience. Routine maintenance is simplified, allowing users to keep the tractor in top working condition without requiring specialized skills or tools.

Overall, the Craftsman 917.374062 is an efficient and reliable option for homeowners who demand a capable lawn tractor. Its powerful engine, cutting deck efficiency, comfortable design, and ease of use make it a worthy investment for maintaining a pristine lawn. Whether tackling thick grass or navigating complex yards, this tractor is built to deliver results.
Top Page Image Contents