Craftsman 917.374353 owner manual Lawn Mower, Drive Wheels

Page 13

LAWN MOWER

Always observe safety rules when per- forming any maintenance.

TIRES

•Keep tires free of gasoline, oil, or insect control chemicals which can harm rubber.

•Avoid stumps, stones, deep ruts, sharp objects and other hazards that may cause tire damage.

DRIVE WHEELS

Check rear drive wheels each time before you mow to be sure they move freely.

The wheels not turning freely means trash,

grass cuttings, etc. are in the drive wheel area and must be cleaned to free drive wheels.

If necessary to clean the drive wheels, be sure to clean both rear wheels.

5.Install the blade bolt with the lock washer and hardened washer into blade adapter and crankshaft.

6.Use block of wood between blade and

lawn mower housing and tighten the blade bolt, turning clockwise.

•The recommended tightening torque is 35-40 ft. Ibs.

IMPORTANT: Blade bolt is heat treated. If bolt needs replacing, replace only with approved bolt shown in the Repair Parts section of this manual.

BLADE CARE

For best results, mower blade must be kept

sharp. Replace a bent or damaged blade. A CAUTION: Use only a replacement

blade approved by the manufacturer of your mower. Using a blade not approved by the manufacturer of your mower is haz- ardous, could damage your mower and void your warranty.

TO REMOVE BLADE

1.Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

2.Turn lawn mower on its side. Make sure air filter and carburetor are up.

3.Use a wood block between blade and mower housing to prevent blade from

turning when removing blade bolt. NOTE: Protect your hands with gloves and/or wrap blade with heavy cloth.

4.Remove blade bolt by turning counter- clockwise.

5.Remove blade and attaching hardware (bolt, lock washer, hardened washer).

6.Remove debris shield.

NOTE: Remove the blade adapter and check the key inside hub of blade adapter. The key must be in good condition to work properly. Replace adapter if damaged.

TO REPLACE BLADE

1.Position blade adapter on engine crank- shaft. Be sure key in adapter and crank-

shaft keyway are aligned; and that drive belt is inside tabs of belt retainer.

2.Install debris shield.

3.Position blade on the blade adapter. IMPORTANT: To ensure proper assembly, center hole in blade must align with star on blade adapter.

4.Be sure the trailing edge of blade (oppo- site sharp edge) is up toward engine.

 

 

Belt

 

retainer

 

Trailing

edge

Blade adapter

 

 

 

Hardened

Debris shield

washer

 

Lockwasher

Blade

Blade

bolt

TO SHARPEN BLADE

NOTE: We do not recommend sharpening

blade - but if you do, be sure blade is bal- anced. An unbalanced blade will cause

eventual damage to mower or engine.

•The blade can be sharpened with a file or on a grinding wheel. Do not attempt to sharpen while on the mower.

•To check blade balance, you will need a

5/8" diameter steel bolt, pin, ora cone bal- ancer. (When using a cone balancer, follow instructions supplied with balancer.)

NOTE: Do not use a nail for balancing blade. The lobes of the center hole may appear to be centered, but are not.

•Slide blade on to an unthreaded portion of the steel bolt or pin and hold the bolt or pin parallel with the ground. If blade is balanced, it should remain in a horizontal position. If either end of the blade moves downward, sharpen the heavy end until the blade is balanced.

Center hole

5/8" bolt or pin

13Blade

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Craftsman Your Safety is Involved Yearfull Warranty on Craftsman Lawn MowerIV. Safe Handling of Gasoline General OperationDo not RJ19HX General ServiceLawn Mower Performance Lawn Mower MaintenanceTo Unfold Handle To Remove Mower from CartonTo Assemble Grass Catcher MowingKnow Your Lawn Mower Meets Cpsc Safety RequirementsEngine Speed Side Discharging Rear BaggingFor Rear Bagging To Convert MowerBefore Starting Engine Mowing Tips Mulching Mowing TipsGeneral Recommendations See Engine in Maintenance sectionBefore Each USE LubricationDrive Wheels Lawn MowerGrass Catcher To Clean AIR FilterGear Case Engine LubricationClean Under Drive Cover CleaningWater Washout Feature MufflerRear Deflector To Adjust HandleTo Remove Drive Belt To Replace Drive BeltHandle CarburetorEngine Speed Fold Forward for Storage Mowing PositionOther Problem Cause CorrectionFuel System Engine OILNeed More HELP? ProblemcauseSU Seguridad Esta Comprometida Sears, Roebuck and Co., Hoffman Estates, ILIII. Ninos OperacionII. Operacion Sobre LAS Cuestas HacerRJ19HX SAEMantenimiento DE LA Segadora Rendimiento DE LA SegadoraServicio de Instalaci6n Sears Como Preparar SU Segadora Producto. Aprenda y comprenda sus significados Familiaricese CON SU SegadoraVelocidad DEL Motor Como Usar SU SegadoraImpulsi6n Segadoras CON Descarga Trasera Para Convertir LA SegadoraSegadoras CON Descarga Lateral Para Ensacamiento TraseroImportante Antes DE Hacer Arrancar EL MotorPara Parar EL Motor Consejos Para Segar Y ACOL- Char Onsejos Para SegarAntes DE Cada USO Recomendaciones GeneralesLubricacion Tabla DE LubricacionRuedas DE IMPULSI6N LlantasCuidado DE LA Cuchilla Para Remover LA CuchillaMotor Lubricacion Derrubio DEL Agua LimpiezaLimpie Debajo DE LA Cubierta DE LA Impulsion LA Altura DE Corte SegadoraDesviador Trasero Para Remover Correa DE ImpulsionVelocidad DEL Motor MotorCarburador MangoMotor Problema CausaAceite DEL Motor CilindroCausa ProblemaCraftsman Rotary Lawn Mower - Model Number KEY Part Description Craftsman Rotary Lawn Mower - Model Number 917o374353Craftsman Rotary Lawn Mower - Model Number Part KEYBriggs & Stratton 4-CYCLE Engine 84J19o 334 524 ? Model Number Briggs & Stratton Cycle Engine690959 Pin-Locating Your Home Need More HELP?

917.374353 specifications

The Craftsman 917.374353 is a versatile and powerful lawn mower designed to make lawn care a breeze. This machine is notable for its combination of durability, efficiency, and user-friendly features, making it a popular choice among homeowners and landscaping professionals alike.

One of the standout features of the Craftsman 917.374353 is its robust engine. Powered by a reliable Briggs & Stratton engine, this mower delivers a dependable performance with ample power to tackle various terrains and thicker grass. The engine's design emphasizes easy starting and consistent operation, allowing users to commence their mowing tasks without the hassle of frequent maintenance issues.

The mower is equipped with a 21-inch cutting deck that provides flexibility in grass cutting, ensuring that users can efficiently trim their lawns to their desired height. The adjustable cutting height feature allows for multiple settings, accommodating different grass types and seasonal changes. This adaptability is perfect for homeowners who take pride in their lawn's appearance and require precision in their mowing.

Another notable characteristic of the Craftsman 917.374353 is its self-propelled feature. With variable speed control, users can effortlessly adjust the mower's pace to match their comfort and the mowing conditions. This feature significantly reduces the physical effort required to maneuver the mower, especially in larger yards or hilly landscapes.

Additionally, the mower incorporates advanced bagging and mulching capabilities. The rear bagger efficiently collects clippings, ensuring a tidy lawn without leaving behind unsightly debris. On the other hand, the mulching feature finely chops grass clippings and returns them to the lawn, providing essential nutrients and fostering healthier growth.

Comfort and convenience are also pivotal in the design of the Craftsman 917.374353. The ergonomic handle is adjustable, allowing users of different heights to find a comfortable grip while operating the mower. The mower is also equipped with large rear wheels, providing enhanced stability and maneuverability over uneven ground.

In terms of build quality, the Craftsman 917.374353 exhibits a sturdy construction, ensuring it can endure the stresses of regular use. Its durable components and high-quality materials contribute to an extended lifespan, giving users peace of mind regarding their investment.

In summary, the Craftsman 917.374353 is a powerful lawn mower designed with the needs of consumers in mind. Its combination of a robust engine, self-propelled technology, adjustable cutting height, and efficient bagging or mulching makes it an excellent tool for maintaining a beautiful lawn. Comfort and durability further enhance its appeal, making it a top choice for both novice and experienced lawn care enthusiasts.
Top Page Image Contents