Craftsman 917.37648 manual Cleaning, AIR Filter, Muffler

Page 15

ENGINE

LUBRICATION

Use only high quality detergent oil rated with API service classification SG-SL. Select the

oil's SAE viscosity grade according to your expected operating temperature.

SAE VISCOSITY GRADES

F

-20

0

30 32 40

60

80

100

c J0

 

-27 -1;

;

17

_0

_0 4;

TEMPERATURE RANGE ANTICIPATED BEFORE NEXT OIL CHANGE

NOTE: Although multi-viscosity oils (5W30, 10W30 etc.) improve starting in

cold weather, these multi-viscosity oils will result in increased oil consumption when used above 32°F. Check your engine oil level more frequently to avoid possible engine damage from running low on oil. Change the oil after every 25 hours of op- eration orat least once a year if the mower is not used for 25 hours in one year.

Check the crankcase oil level before starting the engine and after each five (5) hours of continuous use. Tighten oil plug securely each time you check the oil level.

TO CHANGE ENGINE OIL

NOTE: Before tipping lawn mower to drain oil, empty fuel tank by running engine until fuel tank is empty.

1.Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

2.Remove engine oil cap; lay aside on a clean surface.

3.Tip lawn mower on its side as shown and drain oil into a suitable container.

Rock lawn mower back and forth to re- move any oil trapped inside of engine.

4.Wipe off any spilled oil from lawn mower or side of engine.

5.Slowly pour oil down the oil fill spout, stopping every few ounces to check the oil level with the dipstick.

6.Stop adding oil when you reach the

FULL mark on the dipstick. Wait a minute to allow oil to settle.

7.Continue adding small amounts of oil, rechecking the dipstick until oil level settles at FULL. DO NOT overfill, or

engine will smoke heavily from the muffler on startup.

8.Always be sure to retighten oil dipstick before starting engine.

9.Reconnect spark plug wire to spark plug.

AIR FILTER

Your engine will not run properly and may be damaged by using a dirty air filter. Replace the air filter cartridge every 100 hours of operation or every season, whichever occurs first. Service air cleaner more often under dusty conditions.

TO CLEAN AIR FILTER

1.Loosen screw and tilt cover to remove.

2.Carefully remove cartridge.

3.Clean by gently tapping on a flat sur-

face. If very dirty, replace cartridge.

_I, CAUTION: Petroleum solvents, such as kerosene, are not to be used to clean cartridge. They may cause deterioration of the cartridge. Do not oil cartridge. Do not use pressurized air to clean or dry cartridge.

4.Install cartridge, then replace cover making sure the tabs are aligned with

the slots in

the back plate. Fasten

screw securely.

Lip

Back plate

Cartridge

Slot

Cover

Covertab

MUFFLER

Inspect and replace corroded muffler as it could create a fire hazard and/or damage.

SPARK PLUG

Replace spark plug at the beginning of each mowing season or after every 100 hours of operation, whichever occurs first. Spark plug type and gap setting

are shown in the "PRODUCT SPECIFIC- ATIONS" section of this manual.

CLEANING

IMPORTANT: For best performance, keep mower housing free of built-grass

and trash. Clean the underside of your

mower after each use.

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Craftsman Year Full Warranty on Craftsman Lawn Mower IV. Safe Handling of Gasoline Do notRJ19HX API SG-SL SAERepair Protection Agreements Lift To Remove Mower fromCarton To Unfold HandleTo Prepare Battery To Install AttachmentsTo Assemble Grass Catcher Know Your Lawn Mower Meets Cpsc Safety RequirementsDrive Control HOW to USE Your Lawn Mower Engine SpeedDrive Control Adjustment Engine Zone ControlFor Rear Bagging To Convert MowerRear Bagging Side DischargingADD OIL Attach Fuel CAP CartridgeADD Gasoline Mulching Mowing Tips To Stop EngineTo Start Engine Mowing TipsGeneral Recommendations Before Each USELubrication Lawn Mower Cleaning AIR FilterMuffler Rear Deflector Water Washout FeatureClean Under Drive Cover IcautionRotate To Adjust HandleTo Replace Drive Belt Position High Position LOWMower EngineCylinder Problem Cause CorrectionCorrection Need More HELP?Garantia Programa de Mantenimiento Reglas de Seguridad Operacion HacerNo Hacer SERVlClO Rendimiento DE LA Segadora Como Preparar SU Segadora Para Desdoblar EL Mango Para Remover LA Segadora DE LA Caja DE CartonPara Instalar LOS Accesorios Para Montar EL Recogedor DECesped Para Preparar LA BateraImportante Familiaricese CON SU SegadoraComo Usar SU Segadora Velocidad DEL Motor Control DE LA ImpulsionAjuste DEL Mando Para Descarga Lateral Para Convertir LA SegadoraSegadoras CON Descarga Trasera Segadoras CON Descarga LateralPRECAUCI6N Antes DE Hacer Arrancar EL Motor Agregue AceiteFijar EL Cartucho DEL Tapon DEL Carburante Agregue GasolinaConsejos Para Segar Y ACOL- Char Consejos Para SegarDE Lubricacion Antes DE Cada USOLubricacion TablaCuidado DE LA Cuchilla SegadoraLlantas Ruedas DE ImpulsionPara Limpiar EL Filtro DE Aire Caja DE EngranajesMotor Filtro DE AireTrasero Para Ajustar LA Altura DE Corte Derrubio DEL AguaPara Remover Correa DE Impulsion Para Ajustar EL MangoPara Cambiar Correa DE Impulsion Motor Sistema DE Combustible SegadoraVelocidad DEL Motor MangoProblema Llena si viene CausaCraftsman Rotary Lawn Mower - Model Number KEY Part KEY PartNO. no Description71\ 36-73 Lawn Mower Briggs & Stratton 4=CYCLE Engine Replacement EngineCarburetor Gasket SETCarburetor Overhaul KIT Emissions Label Engine Gasket SET 209Briggs & Stratton =CYCLE Engine ModelPTO KEY Part Description Briggs & Stratton 4=CYCLE Engine KEY Part DescriptionService Notes Service Notes Need More HELP?

917.37648 specifications

The Craftsman 917.37648 is a versatile and powerful riding lawn mower designed for homeowners with varying lawn care needs. This model stands out for its combination of robust features, advanced technologies, and user-friendly characteristics that make it a reliable choice for maintaining lawns of different sizes.

At the heart of the Craftsman 917.37648 is its efficient 19 horsepower Kohler engine, designed to deliver consistent power while ensuring smooth operation. This engine not only provides the necessary strength for tackling thick grass and hilly terrains but also promotes longevity and reduced maintenance. The mower boasts a 42-inch cutting deck, allowing users to cover substantial ground with each pass, and with its six-position height adjustment, homeowners can achieve their desired grass length with ease.

One of the standout features of the Craftsman 917.37648 is its automatic transmission. This innovative technology means that riders don’t have to worry about manually shifting gears; instead, the mower seamlessly adjusts speed based on the terrain’s demands. This feature greatly enhances user comfort and allows for a more fluid mowing experience.

For those who prioritize maneuverability, the tight turning radius of the 917.37648 makes it easy to navigate around flower beds, trees, and other obstacles, ensuring no corner of the lawn is left untended.

The mower also incorporates an ergonomic design, with a comfortable high back seat and easy-to-reach controls, making it suitable for extended use without causing fatigue. Additionally, the soft grip steering wheel enhances the driving experience, allowing for precise control and handling.

Safety is a key consideration in the design of the Craftsman 917.37648. It features an automatic shutoff when the operator leaves the seat, providing peace of mind and reducing the risk of accidents.

Furthermore, maintenance is simplified with easy access to the engine and cutting deck, allowing for quick service checks and blade changes. Overall, the Craftsman 917.37648 is a dependable mowing solution that embodies efficiency, comfort, and safety, making lawn care a hassle-free task for homeowners. Whether you have a small front yard or a large garden, this riding mower is built to deliver exceptional results season after season.
Top Page Image Contents