Craftsman 917.374101 manual Lawn Mower, Drive Wheels

Page 14

LAWN MOWER

Always observe safety rules when per- forming any maintenance.

TIRES

•Keep tires free of gasoline, oil, or insect control chemicals which can harm rubber.

•Avoid stumps, stones, deep ruts, sharp objects and other hazards that may cause tire damage.

DRIVE WHEELS

Check rear drive wheels each time before you mow to be sure they move freely.

The wheels not turning freely means trash,

grass cuttings, etc. are in the drive wheel area and must be cleaned to free drive wheels.

If necessary to clean the drive wheels, be sure to clean both rear wheels.

5.Install the blade bolt with the lock washer and hardened washer into blade adapter and crankshaft.

6.Use block of wood between blade and

lawn mower housing and tighten the blade bolt, turning clockwise.

•The recommended tightening torque is 35-40 ft. Ibs.

IMPORTANT: Blade bolt is heat treated. If bolt needs replacing, replace only with approved bolt shown in the Repair Parts section of this manual.

BLADE CARE

For best results, mower blade must be kept

sharp. Replace a bent or damaged blade. A CAUTION: Use only a replacement

blade approved by the manufacturer of your mower. Using a blade not approved by the manufacturer of your mower is haz- ardous, could damage your mower and void your warranty.

TO REMOVE BLADE

1.Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

2.Turn lawn mower on its side. Make sure air filter and carburetor are up.

3.Use a wood block between blade and mower housing to prevent blade from

turning when removing blade bolt. NOTE: Protect your hands with gloves and/or wrap blade with heavy cloth.

4.Remove blade bolt by turning counter- clockwise.

5.Remove blade and attaching hardware (bolt, lock washer, hardened washer).

6.Remove debris shield.

NOTE: Remove the blade adapter and check the key inside hub of blade adapter. The key must be in good condition to work properly. Replace adapter if damaged.

TO REPLACE BLADE

1.Position blade adapter on engine crank- shaft. Be sure key in adapter and crank-

shaft keyway are aligned; and that drive belt is inside tabs of belt retainer.

2.Install debris shield.

3.Position blade on the blade adapter. IMPORTANT: To ensure proper assembly, center hole in blade must align with star on blade adapter.

4.Be sure the trailing edge of blade (oppo- site sharp edge) is up toward engine.

 

 

Belt

 

retainer

 

Trailing

edge

Blade adapter

 

 

 

Hardened

Debris shield

washer

 

Lockwasher

Blade

Blade

bolt

TO SHARPEN BLADE

NOTE: We do not recommend sharpening

blade - but if you do, be sure blade is bal- anced. An unbalanced blade will cause

eventual damage to mower or engine.

•The blade can be sharpened with a file or on a grinding wheel. Do not attempt to sharpen while on the mower.

•To check blade balance, you will need a

5/8" diameter steel bolt, pin, ora cone bal- ancer. (When using a cone balancer, follow instructions supplied with balancer.)

NOTE: Do not use a nail for balancing blade. The lobes of the center hole may appear to be centered, but are not.

•Slide blade on to an unthreaded portion of the steel bolt or pin and hold the bolt or pin parallel with the ground. If blade is balanced, it should remain in a horizontal position. If either end of the blade moves downward, sharpen the heavy end until the blade is balanced.

Center hole

5/8" bolt or pin

14Blade

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Craftsman Yearfull Warranty on Craftsman Lawn Mower Your Safety is InvolvedDo not General OperationIV. Safe Handling of Gasoline General Service RJ19HXLawn Mower Maintenance Lawn Mower PerformanceMowing To Remove Mower from CartonTo Unfold Handle PositionTo Assemble Grass Catcher To Prepare BatteryTo Install Attachments Meets Cpsc Safety Requirements Know Your Lawn MowerEngine Speed For Rear Bagging Rear BaggingSide Discharging To Convert MowerBefore Starting Engine Mulching Mowing Tips Mowing TipsBefore Each USE See Engine in Maintenance sectionGeneral Recommendations LubricationLawn Mower Drive WheelsGear Case To Clean AIR FilterGrass Catcher Engine LubricationWater Washout Feature CleaningClean Under Drive Cover MufflerTo Remove Drive Belt To Adjust HandleRear Deflector To Replace Drive BeltEngine Speed CarburetorHandle Fold Forward for Storage Mowing PositionOther BatteryProblem Cause Correction Fuel SystemProblem CauseSears, Roebuck and Co., Hoffman Estates, IL SU Seguridad Esta ComprometidaII. Operacion Sobre LAS Cuestas OperacionIII. Ninos HacerSAE RJ19HXServicio de Instalaci6n Sears Rendimiento DE LA SegadoraMantenimiento DE LA Segadora Como Preparar SU Segadora Para Remover LA Segadora DE LA Caja DE CartonPara Montar EL Recogedor DE Para Instalar LOS Accesorios×ige la presencia del Producto. Aprenda y comprenda sus significadosControl OperadorImpulsi6n Como Usar SU SegadoraControl DE LA IMPULSI6N Ajuste DEL MandoSegadoras CON Descarga Lateral Para Convertir LA SegadoraSegadoras CON Descarga Trasera Para Ensacamiento TraseroAgregue Gasolina Para Vaciar EL Recogedor DE CospedAntes DE Hacer Arrancar EL Motor Agregue Aceite Onsejos Para Segar Consejos Para Segar Y ACOL- CharRecomendaciones Generales Antes DE Cada USORuedas DE IMPULSI6N SegadoraLlantas Cuidado DE LA CuchillaPara Cambiar EL Aceite DEL Motor Recogedor DE CospedCaja DE Engranajes Filtro DE AireLimpie Debajo DE LA Cubierta DE LA Impulsion LimpiezaDerrubio DEL Agua Desviador Trasero SegadoraLA Altura DE Corte Para Remover Correa DE ImpulsionVelocidad DEL Motor CarburadorAceite DEL Motor Problema CausaMotor CilindroCausa Craftsman Rotary Lawn Mower - Model Number Description CraftsmanKEY DESCRiPTiON1833 Craftsman Rotary Lawn Mower - Model Number 917o374101 Briggs & Stratton 4-CYCLE Engine 1388ii 969 Carburetoroverhaulkit KEY Part Description PTOPassage 968 692298 Cover-Air Service Notes Service Notes Need More HELP? Your Home

917.374101 specifications

The Craftsman 917.374101 is a versatile and reliable lawn mower designed to meet the needs of homeowners seeking to maintain a well-manicured lawn with ease. Renowned for its durability and efficient performance, this mower brings a robust set of features and technologies that prioritize user comfort and effective yard care.

One of the standout characteristics of the Craftsman 917.374101 is its powerful engine. Equipped with a 190cc Briggs & Stratton engine, it provides ample power for cutting through thick grass and tackling uneven terrain. This engine is designed to offer reliable starting performance, ensuring that users can quickly get to work without the frustration of long startup times.

The mower features a 21-inch steel cutting deck, which not only ensures a wide cutting path for quicker mowing sessions but also enhances durability. This material ensures longevity and reduces the likelihood of deck damage over time. The adjustable cutting height feature allows users to choose from multiple settings, ranging from 1.25 inches to 3.75 inches, accommodating various grass types and mowing preferences.

Another key feature of the Craftsman 917.374101 is its easy maneuverability. The mower is designed with a lightweight frame that allows for effortless navigation around trees, flower beds, and other obstacles in the yard. Coupled with its rear bagging capability, users can efficiently collect grass clippings, making cleanup simpler and facilitating a cleaner lawn appearance.

Technologically, this model includes a reliable self-propulsion system that alleviates the strain of pushing the mower manually. This feature not only ensures efficient mowing but also enhances user control, making it easier to navigate slopes and varied terrain. Additionally, the mower is designed with user-friendly controls, making adjustments straightforward and intuitive.

Safety features like the blade brake and the foldable handle for compact storage further enhance the usability of the Craftsman 917.374101. The easy-to-use controls and ergonomic design make it suitable for a wide range of users, from novice homeowners to experienced landscapers.

Overall, the Craftsman 917.374101 stands out as a practical solution for lawn maintenance needs. Its powerful engine, versatile cutting deck, innovative self-propulsion technology, and user-centric design all contribute to making yard work efficient, effective, and enjoyable. Whether for small residential lawns or larger estates, this mower delivers a reliable performance that meets the challenges of diverse mowing tasks.
Top Page Image Contents