AC VOLTAGE, INSTALLATION AND RACK MOUNTING | 3 |
115v - 230v AC Voltage
Note: Only a qualified repair technician should make AC voltage conversions. For your own safety, please do not attempt this yourself!
Installation and Ventilation Requirements
Install your Model 5125 away from heat sources such as heating ducts, radiators, or other heat producing components. Always position it horizontally.
Observe the following ventilation guidelines when installing the Model 5125 in an equipment rack or any other enclosed space:
You should never install the Model 5125 in an unventilated equipment cabinet or compartment because hot air will not exhaust adequately to prevent overheating. Air won’t often circulate adequately in a cabinet or enclosure whose front and back sides are open; pockets of intense heat can still develop around any
Do not place the unit on carpeting or any other material that could obstruct air flow into the ven- tilation holes in its chassis bottom.
Rack Mounting
The Model 5125 occupies three rack spaces in a standard 19” equipment rack.
For rack mounting, you must use the Parasound RMK33 rack mounting kit (purchased separate- ly). We recommend that you use the 8 insulated shoulder washers with the four mounting bolts which are included with the RMK33. This eliminates