Craftsman 917.376241 owner manual Lawn Mower, Drive Wheels

Page 14

LAWN MOWER

Always observe safety rules when per- forming any maintenance.

TIRES

Keep tires free of gasoline, oil, or insect control chemicals which can harm rubber.

Avoid stumps, stones, deep ruts, sharp objects and other hazards that may cause tire damage.

DRIVE WHEELS

Check front drive wheels each time before you mow to be sure they move freely.

The wheels not turning freely means trash,

grass cuttings, etc. are in the drive wheel area and must be cleaned to free drive wheels.

If necessary to clean the drive wheels, be sure to clean both front wheels.

1.Remove hubcaps, Iocknuts & washers.

2.Remove wheels from wheel adjusters.

3.Remove any trash or grass cuttings from inside the dust cover, pinion and/ or drive wheel gear teeth.

4.Put wheels back in place.

NOTE: If after cleaning, the drive wheels do not turn freely, contact a Sears or other qualified service center.

BLADE CARE

For best results, mower blade must be kept sharp. Replace a bent or damaged blade. A CAUTION: Use only a replacement blade approved by the manufacturer of your mower. Using a blade not approved by the manufacturer of your mower is haz- ardous, could damage your mower and void your warranty.

TO REMOVE BLADE

1.Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

2.Turn lawn mower on its side. Make sure air filter and carburetor are up.

3.Use a wood block between blade and

mower housing to prevent blade from turning when removing blade bolt.

NOTE: Protect your hands with gloves and/or wrap blade with heavy cloth.

4.Remove blade bolt by turning counter- clockwise.

5.Remove blade and attaching hardware

(bolt, lock washer, hardened washer). NOTE: Remove the blade adapter and check the key inside hub of blade adapter. The key must be in good condition to work properly. Replace adapter if damaged.

TO REPLACE BLADE

1.Position the blade adapter on the en- gine crankshaft. Be sure key in adapter and crankshaft keyway are aligned.

2.Position blade on the blade adapter.

IMPORTANT: To ensure proper assembly, center hole in blade must align with star on blade adapter.

3.Be sure trailing edge of blade (opposite sharp edge) is up toward the engine.

4.Install the blade bolt with the lock washer and hardened washer into blade adapter and crankshaft.

5.Use block of wood between blade and

lawn mower housing and tighten the blade bolt, turning clockwise.

The recommended tightening torque is 35-40 ft. Ibs.

IMPORTANT: Blade bolt is heat treated. If bolt needs replacing, replace only with approved bolt shown in the Repair Parts section of this manual.

Blade adapter

Key

Crankshaft

Lockwasher

 

 

Blade

 

....',,

Blade

 

_

 

 

bolt

Hardened

:_,:,,,",

/ \ '\

 

 

washer

Trailing

edge

retainer

TO SHARPEN BLADE

NOTE: We do not recommend sharp-

ening blade - but if you do, be sure the blade is balanced. An unbalanced blade

will cause eventual damage to lawn mower or engine.

The blade can be sharpened with a file or on a grinding wheel. Do not attempt to sharpen while on the mower.

To check blade balance, you will need a 5/8" diameter steel bolt, pin, or a cone balancer. (When using a cone balancer, follow the instructions supplied with it.)

NOTE: Do not use a nail for balancing blade. The lobes of the center hole may appear to be centered, but are not.

Slide blade on to an unthreaded portion of the steel bolt or pin and hold the bolt or pin parallel with the ground. If blade is balanced, it should remain m a horizontal position. If either end of the blade moves downward, sharpen the heavy end until the blade is balanced.

Center hole

5/8" bolt or pin

14Blade

Image 14
Contents Craftsman Yearfull Warranty on Craftsman Lawn Mower Your Safety is InvolvedDo not General OperationIV. Safe Handling of Gasoline General Service RJ19HXLawn Mower Maintenance Lawn Mower PerformanceMowing To Remove Mower from CartonTo Unfold Handle PositionTo Assemble Grass Catcher To Prepare BatteryTo Install Attachments Without OIL or Gasoline Meets Cpsc Safety RequirementsKnow Your Lawn Mower HOW to USE Your Lawn Mower For Rear Bagging Before Starting EngineTo Empty Grass Catcher ADD OILTo Stop Engine To Start EngineMulching Mowing Tips Mowing TipsLubrication General RecommendationsBefore Each USE Before After EveryLawn Mower Drive WheelsGear Case To Clean AIR FilterGrass Catcher EngineMuffler CleaningClean Under Drive Cover Spark PlugTo Remove Drive Belt To Adjust HandleRear Deflector To Replace Drive BeltHandle EngineCarburetor Forward for Storage Mowing PositionFuel System BatteryOther CylinderCorrection ProblemCause Need More HELP?Sears, Roebuck and Co., Hoffman Estates, IL SU Seguridad Esta ComprometidaII. Operacion Sobre LAS Cuestas OperacionIII. Ninos HacerSAE RJ19HXServicio de Instalaci6n Sears Rendimiento DE LA SegadoraMantenimiento DE LA Segadora Como Preparar SU Segadora Para Remover LA Segadora DE LA Caja DE CartonPara Montar EL Recogedor DE Cesped Para Instalar LOS AccesoriosOperador Producto. Aprenda y comprenda sus significadosLa presencia Control de la impulsionComo Usar SU Segadora Velocidad DEL MotorImportante Para Vaciar EL Recogedor DEAntes DE Hacer Arrancar EL Motor Para Hacer Arrancar EL Motor Para Parar EL MotorOnsejos Para Segar Consejos Para Segar Y ACOL- CharLubricacion Recomendaciones GeneralesAntes DE Cada USO Tabla DE LubricacionSegadora Motor Lubricacion Limpieza Limpie Debajo DE LA Cubierta DE LA IMPULSI6NPara Ajustar EL Mango Desviador TraseroPara Remover Correa DE Impulsion Carburador MotorVelocidad DEL Motor SegadoraOtros ProblemaCausa Problema \52\ Part CraftsmanKEY Part DescriptionCraftsman Rotary Lawn Mower - Model Number KEY Part Description DESCRiPTiON635 718 Replacement Engine383 Carburetor Overhaul KIT CarburetorGasket SET 689 305 332 455 190 592Emissions Label 597Engine Gasket SET KEY Part Description PTO670 692294 Spacer-Fuel Service Notes Service Notes Need More HELP? Your Home

917.376241 specifications

The Craftsman 917.376241 is a reliable riding mower designed for homeowners seeking efficiency and performance in lawn care. This mower combines advanced features and technologies, making it an excellent choice for tackling a variety of mowing tasks.

One of the standout characteristics of the Craftsman 917.376241 is its powerful engine. Equipped with a robust 24 HP Kohler engine, it ensures smooth starts and reliable performance across different terrains. The engine offers a dependable solution for even larger lawns, providing the power needed to handle tough grass and uneven surfaces.

Another noteworthy feature is the 42-inch cutting deck. The deck is designed for precision cutting, allowing users to cover more ground in fewer passes while achieving an even cut. It also offers adjustable cutting heights, enabling operators to customize the mower's performance based on their grass type and desired finish. This versatility is particularly beneficial for homeowners looking to maintain a manicured lawn.

The Craftsman 917.376241 also boasts a hydrostatic transmission, offering seamless speed control without the need for cumbersome shifting. This technology not only enhances user comfort but also allows for smoother operation, especially when navigating turns or uneven terrain. The mower’s maneuverability is further improved by its tight turning radius, making it easier to navigate around flower beds, trees, and other obstacles.

Safety features are another priority in the design of the Craftsman 917.376241. It is equipped with a seat switch that ensures the mower will automatically shut off if the operator leaves the seat, preventing accidents. Additionally, the mower's robust build includes reinforced structures designed to withstand the rigors of regular use.

Comfort is also a key aspect of this riding mower. It features an ergonomic seat and dashboard layout, ensuring that users can operate the mower with ease and minimal fatigue. The inclusion of cup holders and storage compartments highlights Craftsman's focus on user convenience.

In summary, the Craftsman 917.376241 is a well-rounded riding mower ideal for homeowners looking to maintain a beautiful lawn with efficiency and ease. Its powerful engine, adjustable cutting deck, hydrostatic transmission, and safety features combine to make it a top choice in the riding mower market. Whether you are managing a small yard or a larger landscape, this mower provides the performance and reliability necessary to get the job done right.