Rear Deflector, To Remove Drive Belt | Craftsman 917.37193 instruction

A WARNING: To avoid serious injury, before performing any service and adjustments:

1.Release control bar and stop engine.

2.Make sure the blade and all moving parts have completely stopped.

3.Disconnect spark plug wire from spark plug and place wire where it cannot come in

contact with plug.

LAWN MOWER

TO ADJUST CUTTING HEIGHT

See "TO ADJUST CUTTING HEIGHT" in the Operation section of this manual.

REAR DEFLECTOR

The rear deflector, attached between the rear wheels of your mower, is provided to

minimize the possibility that objects will be thrown out of the rear of the mower

into the operator mowing position. If the deflector becomes damaged, it should be replaced.

TO REMOVE DRIVE BELT

1, Remove drive cover and belt keeper.

2.Remove belt from gearcase pulley.

3.Turn lawn mower on its side with air filter and carburetor down.

4.Remove blade, engine pulley and debris shield.

5.Remove engine pulley and belt from debris shield.

TO REPLACE DRIVE BELT

1.Place new drive belt in engine pulley and belt retainer of debris shield.

2.Route the other end of the new drive belt through hole in housing.

3.Reinstall debris shield.

4.Return mower to upright position.

5.Install new belt on gearcase pulley.

6.Reinstall belt keeper and drive cover.

NOTE: Always use factory approved belt to assure proper fit and long life.

7.Turn lawn mower on its side with air filter and carburetor down.

8.Reinstall blade.

Engine pulley

Drive belt

Belt retainer

Debris shield

TO ADJUST HANDLE

The handle can be mounted in a high or low position. The mounting holes in the bottom of lower handle are off center for raising or lowering the handle.

1.Remove upper handle and wire tie(s) securing cable(s) to lower handle.

2.Remove hairpin cotters from lower handle bracket mounting pin.

3.Squeeze lower handle in to remove it from mounting pins.

4.Turn lower handle over to raise or lower handle.

5.Squeeze lower handle in and position holes onto mounting pins on handle bracket.

6.Reassemble upper handle and all parts removed from lower handle.

Mowing		Mowing
position	[":!	z';,, position

/ /

/\\ j i/

rpin__ _

Hai

cotter --_)

__Handle

Mounting_=_:_bracket pm

LOW POSITION HIGH POSITION

917.37193 specifications

The Craftsman 917.37193 is a powerful lawn tractor designed for homeowners looking for efficiency and ease of use in lawn care. This robust machine combines modern engineering with user-friendly features, making it an ideal choice for both novice and experienced gardeners.

At the heart of the Craftsman 917.37193 is a reliable 24 HP Briggs & Stratton engine, providing the power needed to tackle even the toughest mowing tasks. This engine ensures smooth operation and efficient fuel consumption, allowing users to mow larger areas without frequent refueling. The automatic transmission enhances the driving experience by seamlessly adjusting speeds based on the user's needs, eliminating the hassle of manual shifting.

One of the standout features of the 917.37193 is its 42-inch cutting deck, which is designed for precise and even lawn mowing. It offers multiple cutting heights, enabling users to customize their lawn’s appearance. This versatility allows for adapting to different grass types and seasonal changes. The deck is made of durable steel, ensuring longevity and resistance against wear and tear.

The Craftsman 917.37193 also incorporates advanced technologies such as the ReadyStart® System. This feature allows for effortless starting – simply turn the key, and the engine is ready to go without the need for prime or choke. This convenience is especially valuable during busy mornings when time is of the essence.

Another noteworthy characteristic is its comfort-focused design. The adjustable high-back seat ensures that users remain comfortable during extended mowing sessions. The ergonomic steering wheel and easy-to-reach controls enhance maneuverability and reduce fatigue, making yard work less of a chore.

Safety features are paramount, and the Craftsman 917.37193 does not disappoint. It includes a safety blade shutoff that automatically engages when the operator leaves the seat, providing peace of mind. Additionally, the headlights enhance visibility, allowing for mowing in low-light conditions.

In summary, the Craftsman 917.37193 is a versatile lawn tractor that brings power, technology, and user comfort to the forefront of lawn maintenance. With its reliable engine, efficient cutting deck, and thoughtful design features, it’s an excellent investment for those looking to achieve a well-manicured lawn with minimal effort.