Craftsman 917.28927 manual Tires

Page 18

TRACTOR

Alwaysobservesafetyruleswhenper- forminganymaintenance.

BRAKEOPERATION

If tractor requires more than five (5) feet to stop at highest speed in highest gear on a level, dry concrete or paved surface, then brake must be serviced. (See "TO CHECK BRAKE" in the Service and Adjustments section of this manual).

TIRES

•Maintain proper air pressure in air tires (See PSI on tires).

•Keep tires free of gasoline, oil, or insect control chemicals which can harm rubber.

•Avoid stumps, stones, deep ruts, sharp

objects and other hazards that may cause tire damage.

NOTE: To seal tire punctures and prevent flat tires due to stow leaks, tire sealant may be pu r-

chased from your local parts dealer. Tire seat- ant also prevents tire dry rot and corrosion.

OPERATOR PRESENCE SYSTEM AND REVERSE OPERATION SYSTEM (ROS)

Be sure operator presence and reverse operation systems are working properly, if your tractor does not function as described, repair the problem immediately.

•The engineshoutd notstartuntessthe brake pedal isfully depressed, and the attachment clutch control isinthe disengaged position.

CHECK OPERATOR PRESENCE SYSTEM

•When the engine is running with the ignition switch in the ROS "ON" position and the attachment clutch engaged, any attempt by the operator to drive in reverse should NOT shut off the engine.

BLADE CARE

For best results mower blades must be sharp.

Replace worn, bent or damaged blades. A CAUTION: Use only a replacement

blade approved by the manufacturer of your tractor. Using a blade not approved by the manufacturer of your tractor is hazardous, could damage your tractor and void your warranty.

BLADE REMOVAL

1.Raise mower to highest position to al- low access to blades.

NOTE: Protect your hands with gloves and/or wrap blade with heavy cloth.

2.Remove blade bolt by turning counter- clockwise.

3.Install new blade with stamped "GRASS SIDE" facing the ground.

iMPORTANT: To ensure proper assembly, center hole in blade must align with star on mandrel assembly.

4.install and tighten blade bolt securely (45-55 Ft. Lbs. torque).

iMPORTANT: Special blade bolt is heat treated.

Blade

•When the engine is running, any at- tempt by the operator to leave the seat without first setting the parking brake should shut off the engine.

•When the engine is running and the attachment clutch is engaged, any at- tempt by the operator to leave the seat should shut off the engine.

•The attachment clutch should never op- erate unless the operator is in the seat.

ROS "ON" Position Engine "ON" Position

(Normal Operating)

CHECK REVERSE OPERATION (ROS) SYSTEM

•When the engine is running with the ignition switch in the engine "ON" posi- tion and the attachment clutch engaged, any attempt by the operator to drive in reverse should shut off the engine.

Blade Bolt

Assembly

(Special)

"Star

 

Center

Hole

BATTERY

Your tractor has a battery charging system which is sufficient for normal use. How-

ever, periodic charging of the battery with an automotive charger will extend its life.

•Keep battery and terminals clean.

•Keep battery bolts tight.

•Keep small vent holes open.

•Recharge at 6-10 amperes for 1 hour. NOTE: The original equipment battery on your tractor is maintenance free. Do not attempt to open or remove caps or covers. Adding or checking level of electrolyte is not necessary.

TO CLEAN BATTERY AND TERMINALS Corrosion and dirt on the battery and termi- nals can cause the battery to "leak" power.

1.Disconnect BLACK battery cable first then RED battery cable and remove battery from tractor.

2.Rinse the battery with plain water and

18 dry.

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Rrftsmrn Craftsman Full Warranty TWO Years on RiDiNG EquipmentSears, Roebuck and Co., Hoffman Estates, IL General Operation Service IV. TowingSafe Handling of Gasoline Generalservice PRODUCTSPECIFiCATiONS For prices and additional information call 1-800=827-6655To Remove Tractor from Adjust SeatCheck Battery Carton Unpack CartonCheckforproperposition LOW Choke Fast Slow Operation SystemrosTractor Service REMINDER/HOUR MeterKnow Your Tractor Attachment Clutch LeverTo SET Parking Brake StoppingTo Adjust Gauge Wheels System CharacteristicsTo Adjust Mower Cutting Height To USE Cruise ControlTo Transport Using the Reverse Operation SystemTo Operate on Hills Towing Carts and Other AttachADD Gasoline To Start EngineRGETRANSMiSSiON Mowing TipsPage General Recommendations Maintenance ScheduleLubrication Chart Before Each USETires LUBRiCATiON Transaxle Pump FluidBelts Engine OiL FilterMuffler Deck Washout Port IocknutsVice or Adjustments To iNSTALL MowerTo Remove Mower 03042rex Visual SIDE-TO-SIDE Adjustment Precision SIDE-TO-SIDE AdjustmentTo Level Mower To Replace Mower Drive Belt To Replace Motion Drive BeltFront Wheel TOE=IN/CAMBER TeryInterlocks and Relays Replacing BatteryTo Replace Headlight Bulb To Replace FuseTo Adjust Throttle Control Cable To Adjust Choke ControlTo Adjust Carburetor Engine OiL TractorFuel System CylindersChoked ProblemCause Correction Start EngineMower Disengaged CleaningPSI EngagedFind this and all your other product manuals online Suggested Guide for Sighting Slopes for Safe Operation Garantja Completa DE Craftsman DOS Aios Para EL Equipo TractorPagar Funcionamiento General DvertenciaAdvertencia II, Funcionamiento EN PendientesIV, Remolque Servicio Manipulacion Segura DE LA GasolinaEdentemente Acuerdos DE PROTECCI!N Para LA Reparacion Especircaciones DEL ProductoResponsabimdades DEL Cliente Servioio DE Instalaoion SearsVerifique LA Bateria Para Remover EL Tractor DE LA Caja DE CartonDesempaque LA Caja DE Carton Para Hacer Rodar EL TractorRevision DE LA Nivelacion DEL Conjunto Lista DE ReviskdnREVISI6N DE LA Presion DE LAS Llantas Revision DE LA POSICI6N ADECUA= DA DE Todas LAS CorreasLacion MotorFreno DE Altura DE LA Levantamiento Sistema Encendido Palanca DE Control DE Movimien Familiaricese CON SU TractorSU Tractor Palanca DE Mando CruceroMotor Parada Cuchillas DE LA SegadoraIMPULSI6N DE Recorrido Para Usar EL Control DE LA ACELER- Acion DPara Ajustar LAS Ruedas CALIBRA- Doras Utimzar EL Mando CruceroPara Ajustar LA Altura DE Corte DE LA Segadora Para Operar LA SegadoraUsar EL Sistema DE Funcionamiento ATR,S Para Parar LAS Cuchillas DE LA SegaFuncionamiento Atras Para Operar EN CerrosAgregue Gasolina Remolque DE Oarretillas O Otros AooesoriosAntes DE Hacer Arrancar EL Motor PREOAUOI6NMenos AutomaticaRgar LA Transmision Consejos Para Segar Mantenimiento Recomendaciones GeneralesAntes DE Cada use ProgramaLlantas TractorOPERAOI6N DEL Freno Verifiez Sistema Presencia OperadorCorreas Enfrjamjento DEL TransejeNivel DEL Fluido DE LA Bomba DEL Transeje MotorLimpieza Puerto DE Lavado DE LA Cubierta IM PortanteServicio O DE Hacer Ajustes Para DesmontarInstale LA Segadora 03042tex Ajuste DE Delante a Atras Para Nivelar LA SegadoraRegulacion Visual DE Lado a Lado Regulacion DE LA Precision DE LadoDesmontaje DE LA Correa Montaje DE LA Correa DE LA SEGA- DoraPara Reemplazar LA Correa DE LA Fuerza Electromotriz Montaje DE LA CorreaDAS Delanteras Para Remover LAS Ruedas Para Hacer ReparacionesPara Adjuntar LOS Cables DE Empalme Entrecierre Y Reles Reemplazar LA Bateria AdvertenciaPara Cambiar LA Bombilla DE LA LUZ Delantera Para Cambiar EL FusiblePara Ajustar EL Cable DE Control DE LA ACELERACI6N Para Ajustar EL Control DE LA ES- TrangulacjonPara Ajustar EL Carburador Aoeite DEL Motor OtrosIdentificacion DE Problemas IDENTIFICACI6N DE Problemas Problema Causa CorreccionUstar EL Carburador Problema ApagaPage Operacion Segura Need More HELP?

917.28927 specifications

The Craftsman 917.28927 is a powerful and versatile lawn tractor designed to meet the demands of homeowners with medium to large-sized yards. This tractor combines functionality with user-friendly features, making it a popular choice for both novice and experienced gardeners.

One of its standout features is the robust 19.5 HP engine, which delivers strong performance and reliability. This engine is equipped with an easy-starting system, allowing users to start mowing without delays. The automatic transmission ensures smooth operation with seamless gear transitions, enabling users to tackle different terrains with ease.

The Craftsman 917.28927 features a 42-inch cutting deck, which allows for efficient coverage of larger areas while maintaining a clean and precise cut. The deck height can be adjusted to offer different cutting options, providing flexibility for varying grass lengths and conditions. Additionally, the deck is designed with a deck wash system that makes maintenance a breeze, helping to keep it free of grass buildup after each use.

Comfort is paramount in the design of the Craftsman 917.28927. The tractor comes with an ergonomically designed seat that provides ample cushioning and back support. The steering wheel is adjustable, allowing users to find their optimal driving position, which enhances overall control and maneuverability.

A key technology integrated into the Craftsman 917.28927 is its turning radius. The tractor boasts a tight turning radius of 16 inches, making it easier to navigate around flower beds, trees, and other obstacles in the yard. This not only saves time when mowing but also reduces the need for trimming later on.

Furthermore, the Craftsman 917.28927 supports attachments like baggers, mulchers, and carts, adding to its versatility. This capability allows users to customize their mowing experience, whether they are mulching clippings back into the lawn or collecting them for disposal.

Overall, the Craftsman 917.28927 is a reliable lawn tractor that blends power, comfort, and practicality. Its array of features, from the durable engine to the adjustable cutting deck and user-friendly technologies, makes it an excellent investment for maintaining a beautiful lawn.
Top Page Image Contents