Introduction, Unpacking and Inspection | Parasound PAL-265 manual

Introduction

Congratulations on your purchase of your PAL-265 Precision Architectural Loudspeaker system and thank you for choosing Parasound. The PAL-265 Precision Architectural Loudspeakers were developed using the finest loudspeaker and crossover components available. Countless hours of computer modeling were spent to insure accurate audio reproduction in a variety of installations where placement compromises must sometimes be made. The PAL-265 Precision Architectural Loudspeakers mounted in your walls deliver the high-fidelity audio reproduction you have come to expect from high-end loudspeakers in a cabinet. Please take a few minutes to read these instructions thoroughly to make the installation easier and insure the best performance of your new PAL-265 Precision Architectural Loudspeakers.

Unpacking and Inspection

Carefully unpack your PAL-265 loudspeakers locate the enclosed accessories:

Item Qty Description

12 PAL-265 baffle and loudspeaker assembly

22 Metal grilles

32 Foam grille inserts

42 Paint Shields

Be sure to carefully inspect the speakers for any signs of shipping damage. If you believe you notice any, contact your Parasound Dealer immediately.

Precautions

If you have any doubts about your ability to properly install in-wall loudspeakers, you should consider the services of a custom installer. If you plan to install them yourself, always use good quality tools to save time and make the installation go more smoothly.

The PAL-265 Precision Architectural Loudspeakers mount into standard 4 inch (or greater) stud depth walls. Determine the final location of both left and right speakers before cutting any holes since changes to one speaker may affect the other either aesthetically or acoustically. Look for pipes, wiring or any other conflicting material that might be damaged before beginning the installation.

Prewiring

Before you purchase loudspeaker wire, check local building codes to make sure that the wire is rated to comply with applicable local safety codes such as UL or CL-2. Use only stranded wire no thinner than AWG 16. For runs longer than 100 feet, we recommend minimum of AWG 14. When pulling wire, take care not to pull the wire too fast to prevent stretching the wire or scorching the insulation from friction. Leave 2 to 3 feet of excess loudspeaker wire at both ends; it is easier to trim off excess wire than to splice additional wire. When securing the wire inside the walls, be careful not to pierce the insulation with nails or staples.

PAL-265 specifications

The Parasound PAL-265 is a remarkable amplifier that epitomizes the brand's commitment to delivering high-fidelity audio performance. Known for its robust design and superior sound quality, the PAL-265 is engineered to cater to audiophiles and home theater enthusiasts alike.

One of the standout features of the PAL-265 is its powerful 2-channel amplifier configuration, capable of delivering 65 watts per channel into 8 ohms, or 100 watts per channel into 4 ohms. This level of power ensures that the amplifier can drive a wide array of loudspeakers with ease, making it an excellent choice for both music and home theater applications. The amplifier is fully discrete and Class A/B, a design that minimizes distortion and enhances transparency, allowing for a listening experience that remains true to the source material.

The PAL-265 incorporates advanced technologies such as a toroidal power transformer which increases efficiency and reduces unwanted noise, leading to cleaner sound quality. The amplifier's output stage features heavy-duty MOSFETs, renowned for their ability to manage thermal performance effectively, delivering consistent power without overheating. This dependable build quality ensures longevity, making the PAL-265 a reliable component for years to come.

In terms of user-friendly features, the PAL-265 includes both RCA and balanced XLR inputs, providing flexibility in connectivity options. Its compact design allows it to fit seamlessly into a variety of home entertainment setups without occupying excessive space. Additionally, it is equipped with a trigger input and output for easy integration into systems with multiple components.

The build quality of the Parasound PAL-265 is exceptional, with a sturdy chassis that minimizes resonance and vibration, contributing to cleaner sound reproduction. The amplifier also features gold-plated binding posts for the speaker outputs, ensuring a secure connection that improves signal integrity.

Overall, the Parasound PAL-265 represents a culmination of thoughtful engineering, delivering powerful, crystal-clear audio that meets the expectations of discerning listeners. With its robust performance and extensive feature set, it’s a solid investment for anyone looking to enhance their listening experience while enjoying the nuances of their favorite music and films.