Connecting Your C/DP-1000, Digital Connections

A Note on Moisture Condensation and Dew

If your C/DP-1000 is brought directly from a cold location to a warm room or if it is placed in a very damp room, moisture may condense on the laser lens within the unit. If this occurs, the player will not operate. Remove the disc and leave the player in a warm, dry place for about an hour so the moisture can evaporate.

Connecting Your C/DP-1000

Before making any connections, turn off the power on your power amplifier. This will avoid an accidental “blast” of sound which could damage your speakers.

Use the cables supplied between the Analog Line Out jacks on your C/DP-1000 and any high level input jacks on your preamplifier, amplifier or receiver marked CD, AUX or TAPE PLAY. Connect the Right and Left channels according to their markings on both units.

You may connect the player directly to a power amplifier which has input gain controls, however you may require the additional gain of a preamplifier to reach adequate listening levels.

You may prefer to try one of the premium audio cables which are available from your Parasound Dealer. The benefits of these are debated among audio hobbyists, and we cannot guarantee you will find a significant audible improvement.

Make certain that all your connections are secure and that there is no tension on the cables which could cause them to pull loose in the future.

Plug the AC cord into any convenient outlet or the unswitched outlet on the rear panel of your preamplifier or receiver. Try to run the AC cord in a perpendicular direction to the audio cables to minimize hum.

Before you start to operate the system with your C/DP-1000 installed, turn down the volume on your amplifier to a low setting. Read the remainder of these instructions.

External Remote Control Connector

Your C/DP-1000 accepts the input of any popular infrared repeater system to facilitate remote control operation from another room or to preserve remote control operation if your player is installed within a cabinet whose doors block signals from your remote control handset. This connector is a popular

3.5mm mini jack and its center conductor is +, the outer is - . For further details contact your Parasound Dealer or Custom Installer.

Digital Connections

Your C/DP-1000 is equipped with an RCA jack for 75 Ω coaxial connection to an external D-A con- verter. You must use a digital cable which will minimize data reflections within the cable. You cannot achieve satisfactory results with a conventional audio patch cord.

Advanced Digital Adapter Module (ADAM)

An optional Advanced Digital Adapter Module (ADAM) is available from your Parasound dealer. The ADAM features the AT&T glass fiber ST module and the AES/EBU standard using a 3 pin XLR con- nector. Either of these will provide superior sound if your D-A converter is equipped to accept them. The advantage of the AT&T glass fiber optic connection is that it electrically isolates your player from the rest of the system, with a potential for a lower noise floor. The AES/EBU output offers a balanced output with a separate ground. It is very easy to install the ADAM yourself. Insure that the C/DP-1000 is unplugged before attempting to install the ADAM. Remove the two screws at either side of the cover plate near the left side of the rear panel on your C/DP-1000.

-2-

C/DP-1000 specifications

The Parasound C/DP-1000 is a high-performance CD player that showcases the company's commitment to delivering exceptional audio quality and advanced technology. Designed for audiophiles and music enthusiasts, the C/DP-1000 harmonizes impressive performance with user-friendly features, making it a sought-after model in its category.

One of the standout features of the C/DP-1000 is its robust build quality. Encased in a solid chassis, the player minimizes vibrations that can interfere with sound quality. The components and design philosophy are focused on achieving a pure audio experience, ensuring that every detail in the music is faithfully reproduced.

Audio performance is further enhanced by the high-quality DACs (digital-to-analog converters) used in the C/DP-1000. These converters are selected for their ability to handle a broad range of frequencies with precision, providing a crisp and clear sound. The player supports various digital formats, allowing listeners to enjoy their music collection without compromise.

Another notable technology integrated into the C/DP-1000 is the advanced error correction system. This helps to ensure that even discs that are scratched or damaged can be played smoothly, minimizing interruptions during playback. Additionally, its intelligent tracking mechanism maintains optimal alignment, reducing the risk of skipping and enhancing reliability.

Connectivity options in the C/DP-1000 are also impressive. It features both balanced and unbalanced outputs, catering to a variety of audio setups. The player can easily integrate into an existing sound system, allowing users to maximize their audio experience. The inclusion of coaxial and optical digital outputs further expands its versatility, making it compatible with a wide array of surround sound systems.

User convenience is prioritized with an intuitive remote control and an easy-to-navigate front panel. The clear display provides essential information at a glance, allowing users to select tracks and configure settings without hassle.

In summary, the Parasound C/DP-1000 is a CD player that embodies high fidelity and meticulous craftsmanship. Its combination of superior audio performance, advanced technologies, and practical features makes it a valuable addition to any audiophile’s setup, promising hours of listening pleasure with unparalleled detail and clarity. Whether for casual listening or critical assessment, the C/DP-1000 stands out as a remarkable option in the world of dedicated CD players.